From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/11] OMAP2+: clock: add interface clock type code with autoidle support
Date: Tue, 15 Feb 2011 23:52:48 -0700 [thread overview]
Message-ID: <20110216065247.22089.10049.stgit@twilight.localdomain> (raw)
In-Reply-To: <20110216065030.22089.61217.stgit@twilight.localdomain>
Add interface clock type code with autoidle enable/disable support.
The clkops structures created in this file will be used for all
OMAP2/3 interface clocks with autoidle support. They will enable the
clock framework to control interface clock autoidle directly.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 6 ++-
arch/arm/mach-omap2/clkt_iclk.c | 73 +++++++++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/clock.h | 9 ++++-
3 files changed, 85 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/mach-omap2/clkt_iclk.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 41cb404..a28ba5a 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -107,19 +107,21 @@ obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
clockdomains44xx_data.o
+
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
clkt2xxx_sys.o \
clkt2xxx_dpllcore.o \
clkt2xxx_virt_prcm_set.o \
clkt2xxx_apll.o clkt2xxx_osc.o \
- clkt2xxx_dpll.o
+ clkt2xxx_dpll.o clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP2420) += clock2420_data.o
obj-$(CONFIG_ARCH_OMAP2430) += clock2430.o clock2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
clock34xx.o clkt34xx_dpll3m2.o \
clock3517.o clock36xx.o \
- dpll3xxx.o clock3xxx_data.o
+ dpll3xxx.o clock3xxx_data.o \
+ clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
dpll3xxx.o dpll44xx.o
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
new file mode 100644
index 0000000..dd8a6d3
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt_iclk.c
@@ -0,0 +1,73 @@
+/*
+ * OMAP2/3 interface clock control
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/prcm.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+
+/* Private functions */
+
+/* XXX */
+void omap2_clkt_iclk_allow_idle(struct clk *clk)
+{
+ u32 v, r;
+
+ r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+ v = __raw_readl((__force void __iomem *)r);
+ v |= (1 << clk->enable_bit);
+ __raw_writel(v, (__force void __iomem *)r);
+}
+
+/* XXX */
+void omap2_clkt_iclk_deny_idle(struct clk *clk)
+{
+ u32 v, r;
+
+ r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+ v = __raw_readl((__force void __iomem *)r);
+ v &= ~(1 << clk->enable_bit);
+ __raw_writel(v, (__force void __iomem *)r);
+}
+
+/* Public data */
+
+const struct clkops clkops_omap2_iclk_dflt_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_companion = omap2_clk_dflt_find_companion,
+ .find_idlest = omap2_clk_dflt_find_idlest,
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+};
+
+const struct clkops clkops_omap2_iclk_dflt = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+};
+
+const struct clkops clkops_omap2_iclk_idle_only = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+};
+
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9972d89..5008f14 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -2,7 +2,7 @@
* linux/arch/arm/mach-omap2/clock.h
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
+ * Copyright (C) 2004-2011 Nokia Corporation
*
* Contacts:
* Richard Woodruff <r-woodruff2@ti.com>
@@ -86,6 +86,10 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent);
+/* clkt_iclk.c public functions */
+extern void omap2_clkt_iclk_allow_idle(struct clk *clk);
+extern void omap2_clkt_iclk_deny_idle(struct clk *clk);
+
u32 omap2_get_dpll_rate(struct clk *clk);
void omap2_init_dpll_parent(struct clk *clk);
@@ -148,6 +152,9 @@ extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
#define omap2_clk_exit_cpufreq_table 0
#endif
+extern const struct clkops clkops_omap2_iclk_dflt_wait;
+extern const struct clkops clkops_omap2_iclk_dflt;
+extern const struct clkops clkops_omap2_iclk_idle_only;
extern const struct clkops clkops_omap2xxx_dpll_ops;
extern const struct clkops clkops_omap3_noncore_dpll_ops;
extern const struct clkops clkops_omap3_core_dpll_ops;
next prev parent reply other threads:[~2011-02-16 6:52 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-16 6:52 [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx Paul Walmsley
2011-02-16 6:52 ` [PATCH 01/11] OMAP2+: clock: disable autoidle on all clocks during clock init Paul Walmsley
2011-02-16 6:52 ` [PATCH 02/11] OMAP2: clock: add DPLL autoidle support Paul Walmsley
2011-02-16 6:52 ` [PATCH 03/11] OMAP2xxx: clock: add clockfw autoidle support for APLLs Paul Walmsley
2011-02-16 6:52 ` [PATCH 04/11] OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control Paul Walmsley
2011-02-16 6:52 ` Paul Walmsley [this message]
2011-02-16 6:52 ` [PATCH 06/11] OMAP2420: clock: add sdrc_ick Paul Walmsley
2011-02-16 6:52 ` [PATCH 07/11] OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks Paul Walmsley
2011-02-16 6:52 ` [PATCH 08/11] OMAP2430/3xxx: clock: add modem clock autoidle support Paul Walmsley
2011-02-16 6:52 ` [PATCH 09/11] OMAP2430: clock: use autoidle clkops for all autoidle-controllable interface clocks Paul Walmsley
2011-02-16 6:52 ` [PATCH 10/11] OMAP3: " Paul Walmsley
2011-02-16 6:52 ` [PATCH 11/11] OMAP2/3: PM: remove manual CM_AUTOIDLE bit setting in mach-omap2/pm*xx.c Paul Walmsley
2011-02-16 9:37 ` [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx Rajendra Nayak
2011-02-16 22:14 ` Paul Walmsley
2011-02-18 5:33 ` Rajendra Nayak
2011-02-16 11:15 ` Rajendra Nayak
2011-02-16 23:05 ` Paul Walmsley
2011-02-18 5:35 ` Rajendra Nayak
2011-03-01 20:58 ` Kevin Hilman
2011-03-08 3:06 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110216065247.22089.10049.stgit@twilight.localdomain \
--to=paul@pwsan.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox