[PATCH 5/5] OMAP3EVM: Set TSC wakeup option in pad config

[tony@atomide.com (Tony Lindgren)]

* Kevin Hilman <khilman@ti.com> [110127 10:41]:
> Vaibhav Hiremath <hvaibhav@ti.com> writes:
> 
> > Set OMAP_PIN_OFF_WAKEUPENABLE to enable the wake-up
> > functionality from touchscreen controller.
> >
> > Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
> > ---
> >  arch/arm/mach-omap2/board-omap3evm.c |    6 ++++--
> >  1 files changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
> > index 2a2efa9..5eddf93 100644
> > --- a/arch/arm/mach-omap2/board-omap3evm.c
> > +++ b/arch/arm/mach-omap2/board-omap3evm.c
> > @@ -716,7 +716,8 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = {
> >  				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
> >  				OMAP_PIN_OFF_WAKEUPENABLE),
> >  	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
> > -				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW),
> > +				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
> > +				OMAP_PIN_OFF_WAKEUPENABLE),
> 
> This hunk doesn't apply because the code below (SYS_BOOT5, etc.) doesn't
> exist in upstream code.

Looks like this applies on top of current omap-for-linus with the mcspi changes
in. So I've applied all the omap3evm related patches.

I had to resolve few changes manually with wl12xx changes, can you guys please
check that everything is working? Pushing them into the devel-board branch.

Regards,

Tony