From: ben-i2c@fluff.org (Ben Dooks)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/6] i2c/pxa2xx: Add PCI support for PXA I2C controller
Date: Wed, 23 Feb 2011 01:14:12 +0000 [thread overview]
Message-ID: <20110223011412.GD15795@trinity.fluff.org> (raw)
In-Reply-To: <20110207175604.GA24850@www.tglx.de>
On Mon, Feb 07, 2011 at 06:56:04PM +0100, Sebastian Andrzej Siewior wrote:
> * Sebastian Andrzej Siewior | 2011-01-14 15:31:07 [+0100]:
>
> >* Ben Dooks | 2011-01-05 20:21:36 [+0000]:
>
> Hi Ben,
>
> >[cut]
> >
> >I fixed up all your comments (unless I forgot something by accident). Is
> >it possible for this to go in this merge window or do I have to wait for
> >the next one?
>
> I've rebased the whole series on top of v2.6.38-rc3. I fixed the
> conflict and considered three new boards (colibri-evalboard, saarb and
> pxa95).
can you repost it then for review please.
> The series is available at
> git://git.linutronix.de/users/bigeasy/soda.git i2c_v3
>
> Sebastian Andrzej Siewior (6):
> i2c-pxa2xx: use dynamic register layout
> ARM: pxa2xx: reorganize I2C files
> i2c-pxa2xx: Add PCI support for PXA I2C controller
> i2c-pxa2xx: add support for shared IRQ handler
> i2c-pxa2xx: check timeout correctly
> i2c-pxa2xx: pass of_node from platform driver to adapter and publish
>
> arch/arm/mach-mmp/include/mach/mmp2.h | 2 +-
> arch/arm/mach-mmp/include/mach/pxa168.h | 2 +-
> arch/arm/mach-mmp/include/mach/pxa910.h | 2 +-
> arch/arm/mach-pxa/balloon3.c | 3 +-
> arch/arm/mach-pxa/cm-x300.c | 2 +-
> arch/arm/mach-pxa/colibri-evalboard.c | 3 +-
> arch/arm/mach-pxa/colibri-pxa270-income.c | 3 +-
> arch/arm/mach-pxa/corgi.c | 2 +-
> arch/arm/mach-pxa/csb726.c | 2 +-
> arch/arm/mach-pxa/devices.c | 2 +-
> arch/arm/mach-pxa/em-x270.c | 2 +-
> arch/arm/mach-pxa/ezx.c | 2 +-
> arch/arm/mach-pxa/hx4700.c | 2 +-
> arch/arm/mach-pxa/littleton.c | 2 +-
> arch/arm/mach-pxa/magician.c | 2 +-
> arch/arm/mach-pxa/mainstone.c | 2 +-
> arch/arm/mach-pxa/mioa701.c | 2 +-
> arch/arm/mach-pxa/mxm8x10.c | 2 +-
> arch/arm/mach-pxa/palm27x.c | 3 +-
> arch/arm/mach-pxa/pcm990-baseboard.c | 2 +-
> arch/arm/mach-pxa/poodle.c | 2 +-
> arch/arm/mach-pxa/pxa27x.c | 3 +-
> arch/arm/mach-pxa/pxa3xx.c | 2 +-
> arch/arm/mach-pxa/pxa95x.c | 2 +-
> arch/arm/mach-pxa/raumfeld.c | 2 +-
> arch/arm/mach-pxa/saar.c | 2 +-
> arch/arm/mach-pxa/saarb.c | 3 +-
> arch/arm/mach-pxa/spitz.c | 3 +-
> arch/arm/mach-pxa/stargate2.c | 2 +-
> arch/arm/mach-pxa/tavorevb3.c | 3 +-
> arch/arm/mach-pxa/tosa.c | 2 +-
> arch/arm/mach-pxa/trizeps4.c | 2 +-
> arch/arm/mach-pxa/viper.c | 2 +-
> arch/arm/mach-pxa/vpac270.c | 3 +-
> arch/arm/mach-pxa/xcep.c | 3 +-
> arch/arm/mach-pxa/z2.c | 3 +-
> arch/arm/mach-pxa/zeus.c | 3 +-
> arch/arm/mach-pxa/zylonite_pxa300.c | 2 +-
> drivers/i2c/busses/Kconfig | 7 +-
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-pxa-pci.c | 176 ++++++++++++++++++++
> drivers/i2c/busses/i2c-pxa.c | 116 ++++++++++---
> .../plat/i2c.h => include/linux/i2c/pxa-i2c.h | 0
> 43 files changed, 310 insertions(+), 78 deletions(-)
> create mode 100644 drivers/i2c/busses/i2c-pxa-pci.c
> rename arch/arm/plat-pxa/include/plat/i2c.h => include/linux/i2c/pxa-i2c.h (100%)
>
> Sebastian
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Ben Dooks, ben at fluff.org, http://www.fluff.org/ben/
Large Hadron Colada: A large Pina Colada that makes the universe disappear.
next prev parent reply other threads:[~2011-02-23 1:14 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-05 16:50 I2C support for CE4100, v3 Sebastian Andrzej Siewior
2011-01-05 16:50 ` [PATCH 1/6] i2c/pxa: use dynamic register layout Sebastian Andrzej Siewior
2011-01-05 16:50 ` [PATCH 2/6] arm/pxa2xx: reorganize I2C files Sebastian Andrzej Siewior
2011-01-05 16:51 ` [PATCH 3/6] i2c/pxa2xx: Add PCI support for PXA I2C controller Sebastian Andrzej Siewior
2011-01-05 20:21 ` Ben Dooks
2011-01-05 22:18 ` Sebastian Andrzej Siewior
2011-01-14 14:31 ` Sebastian Andrzej Siewior
2011-02-07 17:56 ` Sebastian Andrzej Siewior
2011-02-23 1:14 ` Ben Dooks [this message]
2011-01-05 23:03 ` Russell King - ARM Linux
2011-01-05 23:08 ` Greg KH
2011-01-06 9:20 ` Russell King - ARM Linux
2011-01-06 21:57 ` Greg KH
2011-01-07 12:31 ` [PATCH] i2c-pxa2xx: " Sebastian Andrzej Siewior
2011-01-06 10:50 ` [PATCH 3/6] i2c/pxa2xx: " Sebastian Andrzej Siewior
2011-01-06 11:12 ` Russell King - ARM Linux
2011-01-06 11:50 ` Sebastian Andrzej Siewior
2011-01-07 15:57 ` Grant Likely
2011-01-05 16:51 ` [PATCH 4/6] i2c/pxa2xx: add support for shared IRQ handler Sebastian Andrzej Siewior
2011-01-05 16:51 ` [PATCH 5/6] i2c/pxa2xx: check timeout correctly Sebastian Andrzej Siewior
2011-01-05 16:51 ` [PATCH 6/6] i2c/pxa2xx: pass of_node from platform driver to adapter and publish Sebastian Andrzej Siewior
2011-01-21 19:32 ` Grant Likely
2011-01-05 21:51 ` I2C support for CE4100, v3 Ben Dooks
2011-01-07 11:20 ` Sebastian Andrzej Siewior
-- strict thread matches above, loose matches on Subject: below --
2010-12-02 20:09 I2C support for CE4100, v2 Sebastian Andrzej Siewior
2010-12-02 20:09 ` [PATCH 3/6] i2c/pxa2xx: Add PCI support for PXA I2C controller Sebastian Andrzej Siewior
2010-12-14 14:35 ` Florian Fainelli
2011-01-05 17:26 ` Sebastian Andrzej Siewior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110223011412.GD15795@trinity.fluff.org \
--to=ben-i2c@fluff.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).