Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/8] OMAP2+: hwmod: find MPU initiator hwmod during in _register()
Date: Wed, 23 Feb 2011 00:11:50 -0700	[thread overview]
Message-ID: <20110223071146.5874.15334.stgit@twilight.localdomain> (raw)
In-Reply-To: <20110223070455.5874.51326.stgit@twilight.localdomain>

Move the code that looks for the MPU initiator hwmod to run during
the individual hwmod _register() function.  (Previously, it ran after
all hwmods were registered in the omap_hwmod_late_init() function.)

This is done so code can late-initialize a few individual hwmods --
for example, for the system timer -- before the entire set of hwmods is
initialized later in boot via omap_hwmod_late_init().

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Beno?t Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod.c |   23 +++++++++++++++--------
 1 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 9e89a58..41f548e 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1455,7 +1455,7 @@ static int _setup(struct omap_hwmod *oh, void *data)
  */
 static int __init _register(struct omap_hwmod *oh)
 {
-	int ret, ms_id;
+	int ms_id;
 
 	if (!oh || !oh->name || !oh->class || !oh->class->name ||
 	    (oh->_state != _HWMOD_STATE_UNKNOWN))
@@ -1478,9 +1478,14 @@ static int __init _register(struct omap_hwmod *oh)
 
 	oh->_state = _HWMOD_STATE_REGISTERED;
 
-	ret = 0;
+	/*
+	 * XXX Rather than doing a strcmp(), this should test a flag
+	 * set in the hwmod data, inserted by the autogenerator code.
+	 */
+	if (!strcmp(oh->name, MPU_INITIATOR_NAME))
+		mpu_oh = oh;
 
-	return ret;
+	return 0;
 }
 
 
@@ -1644,22 +1649,24 @@ static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data)
  *
  * Must be called after omap2_clk_init().  Resolves the struct clk names
  * to struct clk pointers for each registered omap_hwmod.  Also calls
- * _setup() on each hwmod.  Returns 0.
+ * _setup() on each hwmod.  Returns 0 upon success or -EINVAL upon error.
  */
 static int __init omap_hwmod_late_init(void)
 {
 	int r;
 
+	if (!mpu_oh) {
+		pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n",
+		       __func__, MPU_INITIATOR_NAME);
+		return -EINVAL;
+	}
+
 	r = omap_hwmod_for_each(_populate_mpu_rt_base, NULL);
 
 	/* XXX check return value */
 	r = omap_hwmod_for_each(_init_clocks, NULL);
 	WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n");
 
-	mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME);
-	WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n",
-	     MPU_INITIATOR_NAME);
-
 	omap_hwmod_for_each(_setup, NULL);
 
 	return 0;

  parent reply	other threads:[~2011-02-23  7:11 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-23  7:11 [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods Paul Walmsley
2011-02-23  7:11 ` [PATCH 1/8] OMAP2420: hwmod data: add dmtimer Paul Walmsley
2011-02-23  7:11 ` [PATCH 2/8] OMAP2430: " Paul Walmsley
2011-02-23  7:11 ` [PATCH 3/8] OMAP3: " Paul Walmsley
2011-02-23  7:11 ` Paul Walmsley [this message]
2011-02-23 14:38   ` [PATCH 4/8] OMAP2+: hwmod: find MPU initiator hwmod during in _register() Cousson, Benoit
2011-02-24  9:16     ` Paul Walmsley
2011-02-23  7:11 ` [PATCH 5/8] OMAP2+: hwmod: allow multiple calls to omap_hwmod_init() Paul Walmsley
2011-02-23 14:46   ` Cousson, Benoit
2011-02-23  7:11 ` [PATCH 6/8] OMAP2+: hwmod: ignore attempts to re-late-init a hwmod Paul Walmsley
2011-02-23  7:11 ` [PATCH 7/8] OMAP2+: hwmod: add ability to late-init individual hwmods Paul Walmsley
2011-02-23 19:12   ` Tony Lindgren
2011-02-24  9:06     ` Paul Walmsley
2011-02-23  7:11 ` [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmod right before timer init Paul Walmsley
2011-02-23  8:53   ` [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmodright " Santosh Shilimkar
2011-02-23 11:48     ` DebBarma, Tarun Kanti
2011-02-24  8:13     ` Paul Walmsley
2011-02-24  8:15       ` Paul Walmsley
2011-02-24  8:29         ` DebBarma, Tarun Kanti
2011-02-24  9:00           ` Paul Walmsley
2011-02-24 15:41           ` Tony Lindgren
2011-02-25 14:07             ` DebBarma, Tarun Kanti
2011-02-24  8:57         ` Santosh Shilimkar
2011-02-23  9:13   ` [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmod right " DebBarma, Tarun Kanti
2011-02-24  8:18     ` Paul Walmsley
2011-02-23 14:28 ` [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods Cousson, Benoit
2011-02-28  2:31   ` Paul Walmsley
2011-02-28 11:17     ` Cousson, Benoit
2011-03-02 17:54       ` Tony Lindgren
2011-03-03 11:10         ` Cousson, Benoit
2011-03-04 14:51           ` Cousson, Benoit
2011-03-04 16:19             ` Tony Lindgren
2011-03-04 16:39               ` Cousson, Benoit
2011-03-04 16:42                 ` Paul Walmsley
2011-03-04 16:48                 ` Santosh Shilimkar
2011-02-23 19:12 ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110223071146.5874.15334.stgit@twilight.localdomain \
    --to=paul@pwsan.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox