[patch v2 1/2] mc13892: reboot on wdi event

[u.kleine-koenig@pengutronix.de (Uwe Kleine-König)]

Hello Arnaud,

On Wed, Mar 02, 2011 at 07:45:13PM +0100, Arnaud Patard wrote:
> By default, on wdi (watchdog input) event the mc13892 is powering off.
> This patch allows to change this behaviour throught platform_data.
> 
> v2:
> - move to mc13xxx-core
> - make it configurable
> 
> Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
> 
> Index: linux-2.6-submit/drivers/mfd/mc13xxx-core.c
> ===================================================================
> --- linux-2.6-submit.orig/drivers/mfd/mc13xxx-core.c	2011-03-01 22:26:40.000000000 +0100
> +++ linux-2.6-submit/drivers/mfd/mc13xxx-core.c	2011-03-02 12:24:30.000000000 +0100
> @@ -136,6 +136,9 @@
>  #define MC13XXX_REVISION_FAB		(0x03 << 11)
>  #define MC13XXX_REVISION_ICIDCODE	(0x3f << 13)
>  
> +#define MC13892_POWERCTL2		15
> +#define MC13892_POWERCTL2_WDIRESET	(1<<12)
> +
>  #define MC13783_ADC1		44
>  #define MC13783_ADC1_ADEN		(1 << 0)
>  #define MC13783_ADC1_RAND		(1 << 1)
> @@ -715,6 +718,7 @@
>  	struct mc13xxx_platform_data *pdata = dev_get_platdata(&spi->dev);
>  	enum mc13xxx_id id;
>  	int ret;
> +	unsigned int val;
>  
>  	mc13xxx = kzalloc(sizeof(*mc13xxx), GFP_KERNEL);
>  	if (!mc13xxx)
> @@ -734,6 +738,15 @@
>  	if (ret || id == MC13XXX_ID_INVALID)
>  		goto err_revision;
>  
> +	if ((id == MC13XXX_ID_MC13892) && pdata->wdi_reboot) {
> +		/* allows to reboot on wdi event */
> +		ret = mc13xxx_reg_read(mc13xxx, MC13892_POWERCTL2, &val);
> +		if (!ret) {
> +			val |= MC13892_POWERCTL2_WDIRESET;
> +			mc13xxx_reg_write(mc13xxx, MC13892_POWERCTL2, val);
> +		}
> +	}
> +
>  	/* mask all irqs */
>  	ret = mc13xxx_reg_write(mc13xxx, MC13XXX_IRQMASK0, 0x00ffffff);
>  	if (ret)
> Index: linux-2.6-submit/include/linux/mfd/mc13xxx.h
> ===================================================================
> --- linux-2.6-submit.orig/include/linux/mfd/mc13xxx.h	2011-03-01 22:30:59.000000000 +0100
> +++ linux-2.6-submit/include/linux/mfd/mc13xxx.h	2011-03-01 22:31:27.000000000 +0100
> @@ -149,6 +149,8 @@
git diff provide some info about the context after the @@ hunk header.
I consider this really useful.  GNU diff is able to do this, too (option
-p).

>  	int num_regulators;
>  	struct mc13xxx_regulator_init_data *regulators;
>  	struct mc13xxx_leds_platform_data *leds;
> +
> +	unsigned int wdi_reboot;
there is already a member .flags.  What about defining another bit for
that?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |