From: u.kleine-koenig@pengutronix.de (Uwe Kleine-König)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X
Date: Thu, 3 Mar 2011 09:50:33 +0100 [thread overview]
Message-ID: <20110303085033.GN22310@pengutronix.de> (raw)
In-Reply-To: <1299141603-22148-1-git-send-email-richard.zhao@freescale.com>
On Thu, Mar 03, 2011 at 04:40:02PM +0800, Richard Zhao wrote:
> Move to SOC_SOC_IMX5X. Leave only places which prevent multi-soc
> using ARCH_MX5X.
>
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Looks OK, probably you need to split off the changes that touch files in
drivers/ though.
(Hmm, no diffstat?)
Best regards
Uwe
> diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
> index 03ec6e9..83ee088 100644
> --- a/arch/arm/mach-mx5/Kconfig
> +++ b/arch/arm/mach-mx5/Kconfig
> @@ -1,5 +1,6 @@
> if ARCH_MX5
> -# ARCH_MX51 and ARCH_MX50 are left for compatibility
> +# ARCH_MX50/51/53 are left to mark places where prevent multi-soc in single
> +# image. So for most time, SOC_IMX50/51/53 should be used.
>
> config ARCH_MX50
> bool
> diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
> index 33530d2..be7df13 100644
> --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
> +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
> @@ -194,7 +194,7 @@ static int __init imxXX_add_imx_dma(void)
> } else
> #endif
>
> -#if defined(CONFIG_ARCH_MX51)
> +#if defined(CONFIG_SOC_IMX51)
> if (cpu_is_mx51()) {
> imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1;
> ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
> diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
> index ba65c92..a3d930d 100644
> --- a/arch/arm/plat-mxc/include/mach/irqs.h
> +++ b/arch/arm/plat-mxc/include/mach/irqs.h
> @@ -23,17 +23,17 @@
> #define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS
>
> /* these are ordered by size to support multi-SoC kernels */
> -#if defined CONFIG_ARCH_MX53
> +#if defined CONFIG_SOC_IMX53
> #define MXC_GPIO_IRQS (32 * 7)
> #elif defined CONFIG_ARCH_MX2
> #define MXC_GPIO_IRQS (32 * 6)
> -#elif defined CONFIG_ARCH_MX50
> +#elif defined CONFIG_SOC_IMX50
> #define MXC_GPIO_IRQS (32 * 6)
> #elif defined CONFIG_ARCH_MX1
> #define MXC_GPIO_IRQS (32 * 4)
> #elif defined CONFIG_ARCH_MX25
> #define MXC_GPIO_IRQS (32 * 4)
> -#elif defined CONFIG_ARCH_MX51
> +#elif defined CONFIG_SOC_IMX51
> #define MXC_GPIO_IRQS (32 * 4)
> #elif defined CONFIG_ARCH_MXC91231
> #define MXC_GPIO_IRQS (32 * 4)
> diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
> index 04c7a26..3781f2f 100644
> --- a/arch/arm/plat-mxc/include/mach/mxc.h
> +++ b/arch/arm/plat-mxc/include/mach/mxc.h
> @@ -127,7 +127,7 @@ extern unsigned int __mxc_cpu_type;
> # define cpu_is_mx35() (0)
> #endif
>
> -#ifdef CONFIG_ARCH_MX50
> +#ifdef CONFIG_SOC_IMX50
> # ifdef mxc_cpu_type
> # undef mxc_cpu_type
> # define mxc_cpu_type __mxc_cpu_type
> @@ -139,7 +139,7 @@ extern unsigned int __mxc_cpu_type;
> # define cpu_is_mx50() (0)
> #endif
>
> -#ifdef CONFIG_ARCH_MX51
> +#ifdef CONFIG_SOC_IMX51
> # ifdef mxc_cpu_type
> # undef mxc_cpu_type
> # define mxc_cpu_type __mxc_cpu_type
> @@ -151,7 +151,7 @@ extern unsigned int __mxc_cpu_type;
> # define cpu_is_mx51() (0)
> #endif
>
> -#ifdef CONFIG_ARCH_MX53
> +#ifdef CONFIG_SOC_IMX53
> # ifdef mxc_cpu_type
> # undef mxc_cpu_type
> # define mxc_cpu_type __mxc_cpu_type
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index c895922..450afc5 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -476,7 +476,7 @@ config MTD_NAND_MPC5121_NFC
>
> config MTD_NAND_MXC
> tristate "MXC NAND support"
> - depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX51
> + depends on IMX_HAVE_PLATFORM_MXC_NAND
> help
> This enables the driver for the NAND flash controller on the
> MXC processors.
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index bb233a9..9f9d3f7 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -164,10 +164,10 @@ config SPI_IMX_VER_0_4
> def_bool y if ARCH_MX31
>
> config SPI_IMX_VER_0_7
> - def_bool y if ARCH_MX25 || ARCH_MX35 || ARCH_MX51 || ARCH_MX53
> + def_bool y if ARCH_MX25 || ARCH_MX35 || SOC_IMX51 || SOC_IMX53
>
> config SPI_IMX_VER_2_3
> - def_bool y if ARCH_MX51 || ARCH_MX53
> + def_bool y if SOC_IMX51 || SOC_IMX53
>
> config SPI_IMX
> tristate "Freescale i.MX SPI controllers"
> --
> 1.7.1
>
>
>
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
next prev parent reply other threads:[~2011-03-03 8:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-03 8:40 [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X Richard Zhao
2011-03-03 8:40 ` [PATCH 2/2] ARM: imx3x: clean up ARCH_MX3X Richard Zhao
2011-03-03 8:50 ` Uwe Kleine-König [this message]
2011-03-03 9:15 ` [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X Richard Zhao
2011-03-03 10:53 ` Sascha Hauer
2011-03-03 10:48 ` Shawn Guo
2011-03-03 10:56 ` Shawn Guo
2011-03-04 3:22 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110303085033.GN22310@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox