From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/6] video i.MX: remove mx1 compile time dependencies
Date: Thu, 3 Mar 2011 15:12:44 +0100 [thread overview]
Message-ID: <20110303141244.GQ29521@pengutronix.de> (raw)
In-Reply-To: <20110303134858.GH20423@jasper.tkos.co.il>
On Thu, Mar 03, 2011 at 03:48:58PM +0200, Baruch Siach wrote:
> Hi Sascha,
>
> On Thu, Mar 03, 2011 at 02:30:58PM +0100, Sascha Hauer wrote:
> > remove usage of CONFIG_ARCH_MX1. It's mostly unused anyway, replace
> > it with cpu_is_mx1() where necessary. Also, depend on
> > IMX_HAVE_PLATFORM_IMX_FB instead of the architectures directly.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > Acked-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> > ---
> > drivers/video/Kconfig | 2 +-
> > drivers/video/imxfb.c | 28 ++++++----------------------
> > 2 files changed, 7 insertions(+), 23 deletions(-)
> >
> > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> > index 6bafb51b..59c1e97 100644
> > --- a/drivers/video/Kconfig
> > +++ b/drivers/video/Kconfig
> > @@ -422,7 +422,7 @@ config FB_SA1100
> >
> > config FB_IMX
> > tristate "Freescale i.MX LCD support"
> > - depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
> > + depends on FB && IMX_HAVE_PLATFORM_IMX_FB
>
> The HAVE_FB_IMX symbol becomes redundant, then. We should remove it entirely
> from drivers/video/Kconfig and arch/arm/plat-mxc/devices/Kconfig.
ok. Updated to the following:
8<-------------------------
[PATCH 4/6] video i.MX: remove mx1 compile time dependencies
remove usage of CONFIG_ARCH_MX1. It's mostly unused anyway, replace
it with cpu_is_mx1() where necessary. Also, depend on
IMX_HAVE_PLATFORM_IMX_FB instead of the architectures directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/plat-mxc/devices/Kconfig | 1 -
drivers/video/Kconfig | 5 +----
drivers/video/imxfb.c | 28 ++++++----------------------
3 files changed, 7 insertions(+), 27 deletions(-)
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index b9ab1d5..e4dcf49 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -24,7 +24,6 @@ config IMX_HAVE_PLATFORM_IMXDI_RTC
config IMX_HAVE_PLATFORM_IMX_FB
bool
- select HAVE_FB_IMX
config IMX_HAVE_PLATFORM_IMX_I2C
bool
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6bafb51b..f372416 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -8,9 +8,6 @@ menu "Graphics support"
config HAVE_FB_ATMEL
bool
-config HAVE_FB_IMX
- bool
-
config SH_MIPI_DSI
tristate
depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
@@ -422,7 +419,7 @@ config FB_SA1100
config FB_IMX
tristate "Freescale i.MX LCD support"
- depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
+ depends on FB && IMX_HAVE_PLATFORM_IMX_FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 69bd4a5..0085658 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -65,12 +65,6 @@
#define CPOS_OP (1<<28)
#define CPOS_CXP(x) (((x) & 3ff) << 16)
-#ifdef CONFIG_ARCH_MX1
-#define CPOS_CYP(y) ((y) & 0x1ff)
-#else
-#define CPOS_CYP(y) ((y) & 0x3ff)
-#endif
-
#define LCDC_LCWHB 0x10
#define LCWHB_BK_EN (1<<31)
#define LCWHB_CW(w) (((w) & 0x1f) << 24)
@@ -79,16 +73,6 @@
#define LCDC_LCHCC 0x14
-#ifdef CONFIG_ARCH_MX1
-#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
-#else
-#define LCHCC_CUR_COL_R(r) (((r) & 0x3f) << 12)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 6)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x3f)
-#endif
-
#define LCDC_PCR 0x18
#define LCDC_HCR 0x1C
@@ -115,11 +99,7 @@
#define LCDC_RMCR 0x34
-#ifdef CONFIG_ARCH_MX1
-#define RMCR_LCDC_EN (1<<1)
-#else
-#define RMCR_LCDC_EN 0
-#endif
+#define RMCR_LCDC_EN_MX1 (1<<1)
#define RMCR_SELF_REF (1<<0)
@@ -535,7 +515,11 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
writel(readl(fbi->regs + LCDC_CPOS) & ~(CPOS_CC0 | CPOS_CC1),
fbi->regs + LCDC_CPOS);
- writel(RMCR_LCDC_EN, fbi->regs + LCDC_RMCR);
+ /*
+ * RMCR_LCDC_EN_MX1 is present on i.MX1 only, but doesn't hurt
+ * on other SoCs
+ */
+ writel(RMCR_LCDC_EN_MX1, fbi->regs + LCDC_RMCR);
clk_enable(fbi->clk);
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2011-03-03 14:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-03 13:30 [PATCH] remove kconfig dependencies from ARCH_MX*/MACH_MX* Sascha Hauer
2011-03-03 13:30 ` [PATCH 1/6] media/video i.MX: use IMX_HAVE_PLATFORM_* macros Sascha Hauer
2011-03-03 13:30 ` [PATCH 2/6] rtc i.MX Dryice: use IMX_HAVE_PLATFORM_IMXDI_RTC to depend on Sascha Hauer
2011-03-03 13:30 ` [PATCH 3/6] usb i.MX21: use IMX_HAVE_PLATFORM_IMX21_HCD " Sascha Hauer
2011-03-03 13:30 ` [PATCH 4/6] video i.MX: remove mx1 compile time dependencies Sascha Hauer
2011-03-03 13:48 ` Baruch Siach
2011-03-03 14:12 ` Sascha Hauer [this message]
2011-03-03 13:30 ` [PATCH 5/6] watchdog i.MX: use IMX_HAVE_PLATFORM_IMX2_WDT to depend on Sascha Hauer
2011-03-03 13:31 ` [PATCH 6/6] mmc i.MX sdhci: use IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110303141244.GQ29521@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).