From: alex@digriz.org.uk (Alexander Clouter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] [ARM] orion5x: use safer FPGA ID 'default' for TS-78xx
Date: Sat, 5 Mar 2011 11:38:12 +0000 [thread overview]
Message-ID: <20110305113812.GC22117@chipmunk> (raw)
In-Reply-To: <20110305112937.GA22117@chipmunk>
....abort!
* Alexander Clouter <alex@digriz.org.uk> [2011-03-05 11:29:37+0000]:
>
> Originally the FPGA ID checking switch statement left disabled all the
> TS implemented FPGA devices if the ID was unknown to it. Michael Spang
> created a fix in 3c390473 that changed the default to enable the devices
> in the event TS silently release more revisions into the wild, this
> unfortunately breaks custom FPGA bitstreams.
>
> This patch amends the switch statement so that the TS devices are only
> enabled if on the revision number is unknown (whilst the magic matches).
>
> Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
> ---
> arch/arm/mach-orion5x/ts78xx-fpga.h | 19 ++++++++++---------
> arch/arm/mach-orion5x/ts78xx-setup.c | 18 +++++++++++++-----
> 2 files changed, 23 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
> index 791f754..f0e3be1 100644
> --- a/arch/arm/mach-orion5x/ts78xx-fpga.h
> +++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
> @@ -1,3 +1,4 @@
> +#define TS_78XX_FPGA_MAGIC 0x00b480
> #define FPGAID(_magic, _rev) ((_magic << 8) + _rev)
>
> /*
> @@ -6,15 +7,15 @@
> */
> enum fpga_ids {
> /* Technologic Systems */
> - TS7800_REV_1 = FPGAID(0x00b480, 0x01),
> - TS7800_REV_2 = FPGAID(0x00b480, 0x02),
> - TS7800_REV_3 = FPGAID(0x00b480, 0x03),
> - TS7800_REV_4 = FPGAID(0x00b480, 0x04),
> - TS7800_REV_5 = FPGAID(0x00b480, 0x05),
> - TS7800_REV_6 = FPGAID(0x00b480, 0x06),
> - TS7800_REV_7 = FPGAID(0x00b480, 0x07),
> - TS7800_REV_8 = FPGAID(0x00b480, 0x08),
> - TS7800_REV_9 = FPGAID(0x00b480, 0x09),
> + TS7800_REV_1 = FPGAID(TS_78XX_FPGA_MAGIC, 0x01),
> + TS7800_REV_2 = FPGAID(TS_78XX_FPGA_MAGIC, 0x02),
> + TS7800_REV_3 = FPGAID(TS_78XX_FPGA_MAGIC, 0x03),
> + TS7800_REV_4 = FPGAID(TS_78XX_FPGA_MAGIC, 0x04),
> + TS7800_REV_5 = FPGAID(TS_78XX_FPGA_MAGIC, 0x05),
> + TS7800_REV_6 = FPGAID(TS_78XX_FPGA_MAGIC, 0x06),
> + TS7800_REV_7 = FPGAID(TS_78XX_FPGA_MAGIC, 0x07),
> + TS7800_REV_8 = FPGAID(TS_78XX_FPGA_MAGIC, 0x08),
> + TS7800_REV_9 = FPGAID(TS_78XX_FPGA_MAGIC, 0x09),
>
> /* Unaffordable & Expensive */
> UAE_DUMMY = FPGAID(0xffffff, 0x01),
> diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
> index 1cac714..82e57a6 100644
> --- a/arch/arm/mach-orion5x/ts78xx-setup.c
> +++ b/arch/arm/mach-orion5x/ts78xx-setup.c
> @@ -399,11 +399,19 @@ static void ts78xx_fpga_supports(void)
> ts78xx_fpga.supports.ts_rng.present = 1;
> break;
> default:
> - printk(KERN_WARNING "Unrecognized TS-78XX FPGA ID 0x%02x",
> - ts78xx_fpga.id);
> - ts78xx_fpga.supports.ts_rtc.present = 1;
> - ts78xx_fpga.supports.ts_nand.present = 1;
> - ts78xx_fpga.supports.ts_rng.present = 1;
> + /* enable TS devices if at least the magic matches */
> + if (((ts78xx_fpga.id >> 8) & 0xffffff) == TS_78XX_FPGA_MAGIC) {
> + printk(KERN_WARNING "TS-78xx FPGA: unrecognized revision 0x%.2x\n",
> + ts78xx_fpga.id & 0xff);
> + ts78xx_fpga.supports.ts_rtc.present = 1;
> + ts78xx_fpga.supports.ts_nand.present = 1;
> + ts78xx_fpga.supports.ts_rng.present = 1;
> + break;
> + }
> +
> + ts78xx_fpga.supports.ts_rtc.present = 0;
> + ts78xx_fpga.supports.ts_nand.present = 0;
> + ts78xx_fpga.supports.ts_rng.present = 0;
> }
> }
>
>
--
Alexander Clouter
.sigmonster says: Anger is momentary madness.
-- Horace
next prev parent reply other threads:[~2011-03-05 11:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-05 11:29 [PATCH] [ARM] orion5x: use safer FPGA ID 'default' for TS-78xx Alexander Clouter
2011-03-05 11:38 ` Alexander Clouter [this message]
2011-03-05 11:49 ` [PATCHv2] " Alexander Clouter
2011-03-05 19:37 ` Nicolas Pitre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110305113812.GC22117@chipmunk \
--to=alex@digriz.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).