From: alex@digriz.org.uk (Alexander Clouter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: orion5x: replace printk with pr_{err,info,...} in ts78xx-setup.c
Date: Sun, 6 Mar 2011 10:04:31 +0000 [thread overview]
Message-ID: <20110306100431.GG22117@chipmunk> (raw)
Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
---
arch/arm/mach-orion5x/ts78xx-setup.c | 18 +++++++++---------
1 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 8554707..edb1dd2 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -402,7 +402,7 @@ static void ts78xx_fpga_supports(void)
/* enable devices if magic matches */
switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
case TS7800_FPGA_MAGIC:
- printk(KERN_WARNING "TS-7800 FPGA: unrecognized revision 0x%.2x\n",
+ pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n",
ts78xx_fpga.id & 0xff);
ts78xx_fpga.supports.ts_rtc.present = 1;
ts78xx_fpga.supports.ts_nand.present = 1;
@@ -423,7 +423,7 @@ static int ts78xx_fpga_load_devices(void)
if (ts78xx_fpga.supports.ts_rtc.present == 1) {
tmp = ts78xx_ts_rtc_load();
if (tmp) {
- printk(KERN_INFO "TS-78xx: RTC not registered\n");
+ pr_info("TS-78xx: RTC not registered\n");
ts78xx_fpga.supports.ts_rtc.present = 0;
}
ret |= tmp;
@@ -431,7 +431,7 @@ static int ts78xx_fpga_load_devices(void)
if (ts78xx_fpga.supports.ts_nand.present == 1) {
tmp = ts78xx_ts_nand_load();
if (tmp) {
- printk(KERN_INFO "TS-78xx: NAND not registered\n");
+ pr_info("TS-78xx: NAND not registered\n");
ts78xx_fpga.supports.ts_nand.present = 0;
}
ret |= tmp;
@@ -439,7 +439,7 @@ static int ts78xx_fpga_load_devices(void)
if (ts78xx_fpga.supports.ts_rng.present == 1) {
tmp = ts78xx_ts_rng_load();
if (tmp) {
- printk(KERN_INFO "TS-78xx: RNG not registered\n");
+ pr_info("TS-78xx: RNG not registered\n");
ts78xx_fpga.supports.ts_rng.present = 0;
}
ret |= tmp;
@@ -466,7 +466,7 @@ static int ts78xx_fpga_load(void)
{
ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
- printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
+ pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
(ts78xx_fpga.id >> 8) & 0xffffff,
ts78xx_fpga.id & 0xff);
@@ -494,7 +494,7 @@ static int ts78xx_fpga_unload(void)
* UrJTAG SVN since r1381 can be used to reprogram the FPGA
*/
if (ts78xx_fpga.id != fpga_id) {
- printk(KERN_ERR "TS-78xx FPGA: magic/rev mismatch\n"
+ pr_err("TS-78xx FPGA: magic/rev mismatch\n"
"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
@@ -525,7 +525,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
int value, ret;
if (ts78xx_fpga.state < 0) {
- printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n");
+ pr_err("TS-78xx FPGA: borked, you must powercycle asap\n");
return -EBUSY;
}
@@ -534,7 +534,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
value = 0;
else {
- printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n");
+ pr_err("ts78xx_fpga_store: Invalid value\n");
return -EINVAL;
}
@@ -616,7 +616,7 @@ static void __init ts78xx_init(void)
ret = ts78xx_fpga_load();
ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
if (ret)
- printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
+ pr_err("sysfs_create_file failed: %d\n", ret);
}
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
--
1.7.4.1
next reply other threads:[~2011-03-06 10:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-06 10:04 Alexander Clouter [this message]
2011-03-06 23:54 ` [PATCH] ARM: orion5x: replace printk with pr_{err,info,...} in ts78xx-setup.c Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110306100431.GG22117@chipmunk \
--to=alex@digriz.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox