[PATCH 0/5] OMAP2+: hwmod: miscellaneous fixes for 2.6.39

[PATCH 0/5] OMAP2+: hwmod: miscellaneous fixes for 2.6.39

[Paul Walmsley]

Hello,

this series contains some fixes for the OMAP hwmod code and data:

- the OCP_SYSCONFIG.AUTOIDLE bit mask has been corrected;

- several OMAP2/3 hwmods have been marked with SYSS_HAS_RESET_STATUS,
  which was previously missing;

- _init_clocks() now passes along the return value of its clock lookups,
  allowing an enclosing iterator to terminate if something goes wrong;

- an enhancement allowing non-standard OMAP2/3 hard-reset line status bit
  shifts to be explicitly specified;

- and a minor documentation fix.


- Paul


---

hwmod_a_2.6.39
   text	   data	    bss	    dec	    hex	filename
5702465	 501384	5596664	11800513	 b40fc1	vmlinux.omap2plus_defconfig.orig
5702629	 501384	5596664	11800677	 b41065	vmlinux.omap2plus_defconfig


Avinash.H.M (1):
      omap: hwmod: add syss reset done flags to omap2, omap3 hwmods

Paul Walmsley (1):
      OMAP2+: hwmod: fix a documentation bug with HWMOD_NO_OCP_AUTOIDLE

Rajendra Nayak (1):
      OMAP2+: hwmod: Fix what _init_clock returns

Tarun Kanti DebBarma (1):
      OMAP2+: hwmod: fix incorrect computation of autoidle_mask

omar ramirez (1):
      OMAP2+: hwmod: use status bit info for reset line


 arch/arm/mach-omap2/omap_hwmod.c             |   79 +++++++++++++++-----------
 arch/arm/mach-omap2/omap_hwmod_2420_data.c   |   11 ++--
 arch/arm/mach-omap2/omap_hwmod_2430_data.c   |   12 ++--
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c   |   13 +++-
 arch/arm/mach-omap2/prm2xxx_3xxx.c           |   18 +++---
 arch/arm/mach-omap2/prm2xxx_3xxx.h           |    5 +-
 arch/arm/plat-omap/include/plat/omap_hwmod.h |    4 +
 7 files changed, 82 insertions(+), 60 deletions(-)

[PATCH 1/5] OMAP2+: hwmod: fix incorrect computation of autoidle_mask

[Paul Walmsley]

From: Tarun Kanti DebBarma <tarun.kanti@ti.com>

Autoidle is a single bit, TIOCP_CFG[0], setting on OMAP1/2/3/4 platforms.
In _set_module_autoidle() I am seeing 0x3 value where the mask is computed.
This should be 0x1.

v2:
(1) Modified the subject.
(2) Modified the description with further specific information.

Baseline:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

Tested Info:
Boot tested on OMAP 1/2/3/4.

Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 9e89a58..9b4f6cd 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -373,7 +373,7 @@ static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
 	}
 
 	autoidle_shift = oh->class->sysc->sysc_fields->autoidle_shift;
-	autoidle_mask = (0x3 << autoidle_shift);
+	autoidle_mask = (0x1 << autoidle_shift);
 
 	*v &= ~autoidle_mask;
 	*v |= autoidle << autoidle_shift;

[PATCH 2/5] omap: hwmod: add syss reset done flags to omap2, omap3 hwmods

[Paul Walmsley]

From: Avinash.H.M <avinashhm@ti.com>

Some of the omap2, omap3 peripherals support software reset. This
can be done through the softreset bit in sysconfig register.
The reset status can be checked through resetdone bit of
sysstatus register. syss_has_reset_status is added to the hwmod
database of peripherals which have resetdone bit in sysstatus register.

Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Reviewed-by: Govindraj.R <govindraj.raja@ti.com>
Signed-off-by: Avinash.H.M <avinashhm@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod_2420_data.c |   11 ++++++-----
 arch/arm/mach-omap2/omap_hwmod_2430_data.c |   12 +++++++-----
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |   13 ++++++++-----
 3 files changed, 21 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index f323c6b..de3ac63 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -366,7 +366,7 @@ static struct omap_hwmod_class_sysconfig omap2420_wd_timer_sysc = {
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
 	.sysc_fields    = &omap_hwmod_sysc_type1,
 };
 
@@ -407,7 +407,7 @@ static struct omap_hwmod_class_sysconfig uart_sysc = {
 	.syss_offs	= 0x58,
 	.sysc_flags	= (SYSC_HAS_SIDLEMODE |
 			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields    = &omap_hwmod_sysc_type1,
 };
@@ -818,7 +818,7 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
 	.rev_offs	= 0x00,
 	.sysc_offs	= 0x20,
 	.syss_offs	= 0x10,
-	.sysc_flags	= SYSC_HAS_SOFTRESET,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -990,7 +990,8 @@ static struct omap_hwmod_class_sysconfig omap242x_gpio_sysc = {
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields    = &omap_hwmod_sysc_type1,
 };
@@ -1132,7 +1133,7 @@ static struct omap_hwmod_class_sysconfig omap2420_dma_sysc = {
 	.syss_offs	= 0x0028,
 	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_MIDLEMODE |
 			   SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_EMUFREE |
-			   SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index de0015d..a791957 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -422,7 +422,7 @@ static struct omap_hwmod_class_sysconfig omap2430_wd_timer_sysc = {
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
 	.sysc_fields    = &omap_hwmod_sysc_type1,
 };
 
@@ -463,7 +463,7 @@ static struct omap_hwmod_class_sysconfig uart_sysc = {
 	.syss_offs	= 0x58,
 	.sysc_flags	= (SYSC_HAS_SIDLEMODE |
 			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields    = &omap_hwmod_sysc_type1,
 };
@@ -849,7 +849,8 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
 	.rev_offs	= 0x00,
 	.sysc_offs	= 0x20,
 	.syss_offs	= 0x10,
-	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -1047,7 +1048,8 @@ static struct omap_hwmod_class_sysconfig omap243x_gpio_sysc = {
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields    = &omap_hwmod_sysc_type1,
 };
@@ -1219,7 +1221,7 @@ static struct omap_hwmod_class_sysconfig omap2430_dma_sysc = {
 	.syss_offs	= 0x0028,
 	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_MIDLEMODE |
 			   SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_EMUFREE |
-			   SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index e9d0012..33bae0a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -545,7 +545,8 @@ static struct omap_hwmod_class_sysconfig omap3xxx_wd_timer_sysc = {
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_EMUFREE |
 			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY),
+			   SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields    = &omap_hwmod_sysc_type1,
 };
@@ -557,7 +558,7 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
 	.syss_offs	= 0x10,
 	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
 			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields    = &omap_hwmod_sysc_type1,
 };
@@ -599,7 +600,7 @@ static struct omap_hwmod_class_sysconfig uart_sysc = {
 	.syss_offs	= 0x58,
 	.sysc_flags	= (SYSC_HAS_SIDLEMODE |
 			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields    = &omap_hwmod_sysc_type1,
 };
@@ -1404,7 +1405,8 @@ static struct omap_hwmod_class_sysconfig omap3xxx_gpio_sysc = {
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields    = &omap_hwmod_sysc_type1,
 };
@@ -1658,7 +1660,8 @@ static struct omap_hwmod_class_sysconfig omap3xxx_dma_sysc = {
 	.syss_offs	= 0x0028,
 	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
 			   SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,

[PATCH 3/5] OMAP2+: hwmod: Fix what _init_clock returns

[Paul Walmsley]

From: Rajendra Nayak <rnayak@ti.com>

_init_clock always returns 0 and does
not propogate the error (in case of failure)
back to the caller, causing _init_clocks to
fail silently.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Beno?t Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 9b4f6cd..671f871 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -926,7 +926,7 @@ static int _init_clocks(struct omap_hwmod *oh, void *data)
 	if (!ret)
 		oh->_state = _HWMOD_STATE_CLKS_INITED;
 
-	return 0;
+	return ret;
 }
 
 /**

[PATCH 4/5] OMAP2+: hwmod: fix a documentation bug with HWMOD_NO_OCP_AUTOIDLE

[Paul Walmsley]

The documented name of the HWMOD_NO_OCP_AUTOIDLE flag was incorrect; fix it.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/plat-omap/include/plat/omap_hwmod.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index fedd829..c61e126 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -372,7 +372,7 @@ struct omap_hwmod_omap4_prcm {
  *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
  * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
  *     controller, etc. XXX probably belongs outside the main hwmod file
- * HWMOD_NO_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
+ * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
  *     when module is enabled, rather than the default, which is to
  *     enable autoidle
  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup

[PATCH 5/5] OMAP2+: hwmod: use status bit info for reset line

[Paul Walmsley]

From: omar ramirez <omar.ramirez@ti.com>

On OMAP2 and OMAP3 the reset ctrl shift doesn't match the
status bit, as it does on OMAP4, when handling the reset lines.

This patch adds a new member in the reset info structure, so now it
can be added as part of hwmod data, and checked accordingly for
OMAP2 or 3; otherwise, there could be cases when the shift masks
doesn't match both of the registers, and a successful reset might
throw an error message or vice versa.

Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
[paul at pwsan.com: added a warning if st_shift used on OMAP4; renamed 'r'
 variable; improved some documentation]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod.c             |   75 +++++++++++++++-----------
 arch/arm/mach-omap2/prm2xxx_3xxx.c           |   18 +++---
 arch/arm/mach-omap2/prm2xxx_3xxx.h           |    5 +-
 arch/arm/plat-omap/include/plat/omap_hwmod.h |    2 +
 4 files changed, 58 insertions(+), 42 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 671f871..b0238e1 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -972,25 +972,29 @@ static int _wait_target_ready(struct omap_hwmod *oh)
 }
 
 /**
- * _lookup_hardreset - return the register bit shift for this hwmod/reset line
+ * _lookup_hardreset - fill register bit info for this hwmod/reset line
  * @oh: struct omap_hwmod *
  * @name: name of the reset line in the context of this hwmod
+ * @ohri: struct omap_hwmod_rst_info * that this function will fill in
  *
  * Return the bit position of the reset line that match the
  * input name. Return -ENOENT if not found.
  */
-static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name)
+static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name,
+			    struct omap_hwmod_rst_info *ohri)
 {
 	int i;
 
 	for (i = 0; i < oh->rst_lines_cnt; i++) {
 		const char *rst_line = oh->rst_lines[i].name;
 		if (!strcmp(rst_line, name)) {
-			u8 shift = oh->rst_lines[i].rst_shift;
-			pr_debug("omap_hwmod: %s: _lookup_hardreset: %s: %d\n",
-				 oh->name, rst_line, shift);
+			ohri->rst_shift = oh->rst_lines[i].rst_shift;
+			ohri->st_shift = oh->rst_lines[i].st_shift;
+			pr_debug("omap_hwmod: %s: %s: %s: rst %d st %d\n",
+				 oh->name, __func__, rst_line, ohri->rst_shift,
+				 ohri->st_shift);
 
-			return shift;
+			return 0;
 		}
 	}
 
@@ -1009,21 +1013,22 @@ static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name)
  */
 static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
 {
-	u8 shift;
+	struct omap_hwmod_rst_info ohri;
+	u8 ret;
 
 	if (!oh)
 		return -EINVAL;
 
-	shift = _lookup_hardreset(oh, name);
-	if (IS_ERR_VALUE(shift))
-		return shift;
+	ret = _lookup_hardreset(oh, name, &ohri);
+	if (IS_ERR_VALUE(ret))
+		return ret;
 
 	if (cpu_is_omap24xx() || cpu_is_omap34xx())
 		return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
-						  shift);
+						  ohri.rst_shift);
 	else if (cpu_is_omap44xx())
 		return omap4_prm_assert_hardreset(oh->prcm.omap4.rstctrl_reg,
-						  shift);
+						  ohri.rst_shift);
 	else
 		return -EINVAL;
 }
@@ -1040,29 +1045,34 @@ static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
  */
 static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 {
-	u8 shift;
-	int r;
+	struct omap_hwmod_rst_info ohri;
+	int ret;
 
 	if (!oh)
 		return -EINVAL;
 
-	shift = _lookup_hardreset(oh, name);
-	if (IS_ERR_VALUE(shift))
-		return shift;
+	ret = _lookup_hardreset(oh, name, &ohri);
+	if (IS_ERR_VALUE(ret))
+		return ret;
 
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		r = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
-						 shift);
-	else if (cpu_is_omap44xx())
-		r = omap4_prm_deassert_hardreset(oh->prcm.omap4.rstctrl_reg,
-						 shift);
-	else
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+		ret = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
+						   ohri.rst_shift,
+						   ohri.st_shift);
+	} else if (cpu_is_omap44xx()) {
+		if (ohri.st_shift)
+			pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
+			       oh->name, name);
+		ret = omap4_prm_deassert_hardreset(oh->prcm.omap4.rstctrl_reg,
+						   ohri.rst_shift);
+	} else {
 		return -EINVAL;
+	}
 
-	if (r == -EBUSY)
+	if (ret == -EBUSY)
 		pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
 
-	return r;
+	return ret;
 }
 
 /**
@@ -1075,21 +1085,22 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
  */
 static int _read_hardreset(struct omap_hwmod *oh, const char *name)
 {
-	u8 shift;
+	struct omap_hwmod_rst_info ohri;
+	u8 ret;
 
 	if (!oh)
 		return -EINVAL;
 
-	shift = _lookup_hardreset(oh, name);
-	if (IS_ERR_VALUE(shift))
-		return shift;
+	ret = _lookup_hardreset(oh, name, &ohri);
+	if (IS_ERR_VALUE(ret))
+		return ret;
 
 	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
 		return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
-						       shift);
+						       ohri.st_shift);
 	} else if (cpu_is_omap44xx()) {
 		return omap4_prm_is_hardreset_asserted(oh->prcm.omap4.rstctrl_reg,
-						       shift);
+						       ohri.rst_shift);
 	} else {
 		return -EINVAL;
 	}
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index ec03625..051213f 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -118,7 +118,8 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
 /**
  * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait
  * @prm_mod: PRM submodule base (e.g. CORE_MOD)
- * @shift: register bit shift corresponding to the reset line to deassert
+ * @rst_shift: register bit shift corresponding to the reset line to deassert
+ * @st_shift: register bit shift for the status of the deasserted submodule
  *
  * Some IPs like dsp or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
@@ -129,27 +130,28 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
  * -EINVAL upon an argument error, -EEXIST if the submodule was already out
  * of reset, or -EBUSY if the submodule did not exit reset promptly.
  */
-int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift)
+int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
 {
-	u32 mask;
+	u32 rst, st;
 	int c;
 
 	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
 		return -EINVAL;
 
-	mask = 1 << shift;
+	rst = 1 << rst_shift;
+	st = 1 << st_shift;
 
 	/* Check the current status to avoid de-asserting the line twice */
-	if (omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, mask) == 0)
+	if (omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, rst) == 0)
 		return -EEXIST;
 
 	/* Clear the reset status by writing 1 to the status bit */
-	omap2_prm_rmw_mod_reg_bits(0xffffffff, mask, prm_mod, OMAP2_RM_RSTST);
+	omap2_prm_rmw_mod_reg_bits(0xffffffff, st, prm_mod, OMAP2_RM_RSTST);
 	/* de-assert the reset control line */
-	omap2_prm_rmw_mod_reg_bits(mask, 0, prm_mod, OMAP2_RM_RSTCTRL);
+	omap2_prm_rmw_mod_reg_bits(rst, 0, prm_mod, OMAP2_RM_RSTCTRL);
 	/* wait the status to be set */
 	omap_test_timeout(omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
-						  mask),
+						  st),
 			  MAX_MODULE_HARDRESET_WAIT, c);
 
 	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index 49654c8..a1fc62a 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -282,7 +282,8 @@ static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
 		"not suppose to be used on omap4\n");
 	return 0;
 }
-static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift)
+static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
+						u8 st_shift)
 {
 	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
 		"not suppose to be used on omap4\n");
@@ -300,7 +301,7 @@ extern u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
 /* These omap2_ PRM functions apply to both OMAP2 and 3 */
 extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
 extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
-extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
+extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
 
 #endif	/* CONFIG_ARCH_OMAP4 */
 #endif
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index c61e126..867e2e8 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -124,6 +124,7 @@ struct omap_hwmod_dma_info {
  * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
  * @name: name of the reset line (module local name)
  * @rst_shift: Offset of the reset bit
+ * @st_shift: Offset of the reset status bit (OMAP2/3 only)
  *
  * @name should be something short, e.g., "cpu0" or "rst". It is defined
  * locally to the hwmod.
@@ -131,6 +132,7 @@ struct omap_hwmod_dma_info {
 struct omap_hwmod_rst_info {
 	const char	*name;
 	u8		rst_shift;
+	u8		st_shift;
 };
 
 /**