* [PATCH 5/6] spi/pl022: Add loopback support for the SPI on 5500
@ 2011-03-23 10:05 Linus Walleij
2011-03-24 3:28 ` Grant Likely
0 siblings, 1 reply; 2+ messages in thread
From: Linus Walleij @ 2011-03-23 10:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Philippe Langlais <philippe.langlais@linaro.org>
Extend the vendor data with a loopback field, and add new
amba-pl022 vendor data for the DB5500 pl023, as the pl023
on db8500 and db5500 vary.
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Prajadevi H <prajadevi.h@stericsson.com>
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/spi/amba-pl022.c | 20 +++++++++++++++++++-
1 files changed, 19 insertions(+), 1 deletions(-)
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 95e58c7..fe79773 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -324,6 +324,7 @@ struct vendor_data {
bool unidir;
bool extended_cr;
bool pl023;
+ bool loopback;
};
/**
@@ -1984,7 +1985,7 @@ static int pl022_setup(struct spi_device *spi)
SSP_WRITE_BITS(chip->cr0, clk_freq.scr, SSP_CR0_MASK_SCR, 8);
/* Loopback is available on all versions except PL023 */
- if (!pl022->vendor->pl023) {
+ if (pl022->vendor->loopback) {
if (spi->mode & SPI_LOOP)
tmp = LOOPBACK_ENABLED;
else
@@ -2228,6 +2229,7 @@ static struct vendor_data vendor_arm = {
.unidir = false,
.extended_cr = false,
.pl023 = false,
+ .loopback = true,
};
@@ -2237,6 +2239,7 @@ static struct vendor_data vendor_st = {
.unidir = false,
.extended_cr = true,
.pl023 = false,
+ .loopback = true,
};
static struct vendor_data vendor_st_pl023 = {
@@ -2245,6 +2248,16 @@ static struct vendor_data vendor_st_pl023 = {
.unidir = false,
.extended_cr = true,
.pl023 = true,
+ .loopback = false,
+};
+
+static struct vendor_data vendor_db5500_pl023 = {
+ .fifodepth = 32,
+ .max_bpw = 32,
+ .unidir = false,
+ .extended_cr = true,
+ .pl023 = true,
+ .loopback = true,
};
static struct amba_id pl022_ids[] = {
@@ -2278,6 +2291,11 @@ static struct amba_id pl022_ids[] = {
.mask = 0xffffffff,
.data = &vendor_st_pl023,
},
+ {
+ .id = 0x10080023,
+ .mask = 0xffffffff,
+ .data = &vendor_db5500_pl023,
+ },
{ 0, 0 },
};
--
1.7.3.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 5/6] spi/pl022: Add loopback support for the SPI on 5500
2011-03-23 10:05 [PATCH 5/6] spi/pl022: Add loopback support for the SPI on 5500 Linus Walleij
@ 2011-03-24 3:28 ` Grant Likely
0 siblings, 0 replies; 2+ messages in thread
From: Grant Likely @ 2011-03-24 3:28 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 23, 2011 at 11:05:16AM +0100, Linus Walleij wrote:
> From: Philippe Langlais <philippe.langlais@linaro.org>
>
> Extend the vendor data with a loopback field, and add new
> amba-pl022 vendor data for the DB5500 pl023, as the pl023
> on db8500 and db5500 vary.
>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Signed-off-by: Prajadevi H <prajadevi.h@stericsson.com>
> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Applied, thanks.
g.
> ---
> drivers/spi/amba-pl022.c | 20 +++++++++++++++++++-
> 1 files changed, 19 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
> index 95e58c7..fe79773 100644
> --- a/drivers/spi/amba-pl022.c
> +++ b/drivers/spi/amba-pl022.c
> @@ -324,6 +324,7 @@ struct vendor_data {
> bool unidir;
> bool extended_cr;
> bool pl023;
> + bool loopback;
> };
>
> /**
> @@ -1984,7 +1985,7 @@ static int pl022_setup(struct spi_device *spi)
>
> SSP_WRITE_BITS(chip->cr0, clk_freq.scr, SSP_CR0_MASK_SCR, 8);
> /* Loopback is available on all versions except PL023 */
> - if (!pl022->vendor->pl023) {
> + if (pl022->vendor->loopback) {
> if (spi->mode & SPI_LOOP)
> tmp = LOOPBACK_ENABLED;
> else
> @@ -2228,6 +2229,7 @@ static struct vendor_data vendor_arm = {
> .unidir = false,
> .extended_cr = false,
> .pl023 = false,
> + .loopback = true,
> };
>
>
> @@ -2237,6 +2239,7 @@ static struct vendor_data vendor_st = {
> .unidir = false,
> .extended_cr = true,
> .pl023 = false,
> + .loopback = true,
> };
>
> static struct vendor_data vendor_st_pl023 = {
> @@ -2245,6 +2248,16 @@ static struct vendor_data vendor_st_pl023 = {
> .unidir = false,
> .extended_cr = true,
> .pl023 = true,
> + .loopback = false,
> +};
> +
> +static struct vendor_data vendor_db5500_pl023 = {
> + .fifodepth = 32,
> + .max_bpw = 32,
> + .unidir = false,
> + .extended_cr = true,
> + .pl023 = true,
> + .loopback = true,
> };
>
> static struct amba_id pl022_ids[] = {
> @@ -2278,6 +2291,11 @@ static struct amba_id pl022_ids[] = {
> .mask = 0xffffffff,
> .data = &vendor_st_pl023,
> },
> + {
> + .id = 0x10080023,
> + .mask = 0xffffffff,
> + .data = &vendor_db5500_pl023,
> + },
> { 0, 0 },
> };
>
> --
> 1.7.3.2
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-03-24 3:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-03-23 10:05 [PATCH 5/6] spi/pl022: Add loopback support for the SPI on 5500 Linus Walleij
2011-03-24 3:28 ` Grant Likely
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).