From: tglx@linutronix.de (Thomas Gleixner)
To: linux-arm-kernel@lists.infradead.org
Subject: [patch 00/23] ARM: Final genirq cleanup
Date: Fri, 25 Mar 2011 13:21:49 -0000 [thread overview]
Message-ID: <20110325131617.258789658@linutronix.de> (raw)
The following series cleans up the reminding open coded access to
irq_desc and converts the newly merged (sigh) msm to the new irq chip
functions.
The final patches make use of the generic show_interrupts() and
convert the namespace to the new irq_* function names. That conversion
was done with coccinelle. The last patch folds irq_set_chip and
irq_set_handler pairs into irq_set_chip_and_handler with coccinelle.
The series depends on the irq/cleanup branch in
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git
which will go to Linus later today.
If there are no objections I can push the whole lot through tip.
Thanks,
tglx
Kconfig | 1
common/gic.c | 15 ++----
common/it8152.c | 4 -
common/locomo.c | 17 +++---
common/sa1111.c | 24 ++++-----
common/vic.c | 6 +-
include/asm/hw_irq.h | 8 ---
kernel/ecard.c | 6 +-
kernel/irq.c | 70 ++++------------------------
mach-at91/at91cap9_devices.c | 6 +-
mach-at91/gpio.c | 43 ++++++-----------
mach-at91/irq.c | 3 -
mach-bcmring/irq.c | 10 ++--
mach-clps711x/irq.c | 8 +--
mach-davinci/cp_intc.c | 4 -
mach-davinci/gpio.c | 49 ++++++++------------
mach-davinci/irq.c | 6 +-
mach-dove/irq.c | 20 +++-----
mach-ebsa110/core.c | 4 -
mach-ep93xx/gpio.c | 52 ++++++++++++---------
mach-exynos4/irq-combiner.c | 13 ++---
mach-exynos4/irq-eint.c | 15 +++---
mach-footbridge/common.c | 3 -
mach-footbridge/isa-irq.c | 10 ++--
mach-gemini/gpio.c | 14 ++---
mach-gemini/irq.c | 6 +-
mach-h720x/common.c | 22 ++++-----
mach-h720x/cpu-h7202.c | 6 +-
mach-integrator/integrator_ap.c | 4 -
mach-integrator/integrator_cp.c | 11 +---
mach-iop13xx/irq.c | 10 ++--
mach-iop13xx/msi.c | 6 +-
mach-iop32x/irq.c | 3 -
mach-iop33x/irq.c | 5 +-
mach-ixp2000/core.c | 20 ++++----
mach-ixp2000/ixdp2x00.c | 6 +-
mach-ixp2000/ixdp2x01.c | 6 +-
mach-ixp23xx/core.c | 14 ++---
mach-ixp23xx/ixdp2351.c | 12 ++--
mach-ixp23xx/roadrunner.c | 4 -
mach-ixp4xx/avila-pci.c | 8 +--
mach-ixp4xx/common.c | 4 -
mach-ixp4xx/coyote-pci.c | 4 -
mach-ixp4xx/dsmg600-pci.c | 12 ++--
mach-ixp4xx/fsg-pci.c | 6 +-
mach-ixp4xx/gateway7001-pci.c | 4 -
mach-ixp4xx/goramo_mlr.c | 12 ++--
mach-ixp4xx/gtwx5715-pci.c | 4 -
mach-ixp4xx/ixdp425-pci.c | 8 +--
mach-ixp4xx/ixdpg425-pci.c | 4 -
mach-ixp4xx/nas100d-pci.c | 10 ++--
mach-ixp4xx/nslu2-pci.c | 6 +-
mach-ixp4xx/vulcan-pci.c | 4 -
mach-ixp4xx/wg302v2-pci.c | 4 -
mach-kirkwood/irq.c | 15 +++---
mach-ks8695/gpio.c | 2
mach-ks8695/irq.c | 18 ++++---
mach-lpc32xx/irq.c | 10 ++--
mach-mmp/irq-mmp2.c | 18 +++----
mach-mmp/irq-pxa168.c | 3 -
mach-msm/board-msm8960.c | 2
mach-msm/board-msm8x60.c | 2
mach-msm/board-trout-gpio.c | 10 ++--
mach-msm/board-trout-mmc.c | 2
mach-msm/gpio-v2.c | 49 ++++++++++----------
mach-msm/gpio.c | 18 +++----
mach-msm/irq-vic.c | 7 +-
mach-msm/irq.c | 7 +-
mach-msm/sirc.c | 11 ++--
mach-mv78xx0/irq.c | 8 +--
mach-mx3/mach-mx31ads.c | 7 +-
mach-mx5/eukrea_mbimx51-baseboard.c | 2
mach-mxs/gpio.c | 10 ++--
mach-mxs/icoll.c | 3 -
mach-netx/generic.c | 6 +-
mach-ns9xxx/board-a9m9750dev.c | 8 +--
mach-ns9xxx/irq.c | 60 ++----------------------
mach-nuc93x/irq.c | 4 -
mach-omap1/board-osk.c | 6 +-
mach-omap1/board-palmz71.c | 8 +--
mach-omap1/board-voiceblue.c | 8 +--
mach-omap1/fpga.c | 10 ++--
mach-omap1/irq.c | 4 -
mach-omap2/gpmc.c | 2
mach-omap2/irq.c | 3 -
mach-orion5x/db88f5281-setup.c | 4 -
mach-orion5x/irq.c | 8 +--
mach-orion5x/rd88f5182-setup.c | 4 -
mach-orion5x/terastation_pro2-setup.c | 2
mach-orion5x/ts209-setup.c | 4 -
mach-pnx4008/irq.c | 10 ++--
mach-pxa/balloon3.c | 8 +--
mach-pxa/cm-x2xx-pci.c | 5 +-
mach-pxa/cm-x300.c | 2
mach-pxa/irq.c | 12 ++--
mach-pxa/lpd270.c | 8 +--
mach-pxa/lubbock.c | 8 +--
mach-pxa/mainstone.c | 8 +--
mach-pxa/pcm990-baseboard.c | 8 +--
mach-pxa/pxa3xx.c | 4 -
mach-pxa/viper.c | 8 +--
mach-pxa/zeus.c | 19 ++++---
mach-rpc/irq.c | 14 ++---
mach-s3c2410/bast-irq.c | 6 +-
mach-s3c2412/irq.c | 12 ++--
mach-s3c2416/irq.c | 8 +--
mach-s3c2440/irq.c | 10 ++--
mach-s3c2440/s3c244x-irq.c | 14 ++---
mach-s3c2443/irq.c | 8 +--
mach-s3c64xx/irq-eint.c | 13 ++---
mach-sa1100/cerf.c | 2
mach-sa1100/irq.c | 16 +++---
mach-sa1100/neponset.c | 8 +--
mach-sa1100/pleb.c | 2
mach-shark/irq.c | 3 -
mach-shmobile/board-ap4evb.c | 4 -
mach-shmobile/board-mackerel.c | 6 +-
mach-shmobile/intc-sh7367.c | 6 +-
mach-shmobile/intc-sh7372.c | 6 +-
mach-shmobile/intc-sh7377.c | 6 +-
mach-tcc8k/irq.c | 6 +-
mach-tegra/gpio.c | 83 ++++------------------------------
mach-tegra/include/mach/suspend.h | 2
mach-tegra/irq.c | 5 --
mach-ux500/modem-irq-db5500.c | 3 -
mach-versatile/core.c | 6 +-
mach-vt8500/irq.c | 14 ++---
mach-w90x900/irq.c | 4 -
plat-mxc/3ds_debugboard.c | 14 +----
plat-mxc/avic.c | 4 -
plat-mxc/gpio.c | 24 +++++----
plat-mxc/irq-common.c | 4 -
plat-mxc/tzic.c | 4 -
plat-nomadik/gpio.c | 50 +++++++++++---------
plat-omap/gpio.c | 31 ++++--------
plat-orion/gpio.c | 31 +++++-------
plat-orion/irq.c | 8 +--
plat-pxa/gpio.c | 6 +-
plat-s3c24xx/irq.c | 43 ++++++++---------
plat-s5p/irq-eint.c | 7 +-
plat-s5p/irq-gpioint.c | 22 ++++-----
plat-samsung/irq-uart.c | 10 +---
plat-samsung/irq-vic-timer.c | 13 ++---
plat-samsung/wakeup-mask.c | 8 +--
plat-spear/shirq.c | 12 ++--
plat-stmp3xxx/irq.c | 3 -
plat-stmp3xxx/pinmux.c | 13 ++---
147 files changed, 714 insertions(+), 941 deletions(-)
next reply other threads:[~2011-03-25 13:21 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-25 13:21 Thomas Gleixner [this message]
2011-03-25 13:21 ` [patch 01/23] arm: Ns9xxx: Remove private irq flow handler Thomas Gleixner
2011-03-25 13:21 ` [patch 02/23] arm: tegra: Remove unused function which fiddles with irq_desc Thomas Gleixner
2011-03-26 20:12 ` Varun Wadekar
2011-03-26 20:24 ` Thomas Gleixner
2011-03-26 22:37 ` Colin Cross
2011-03-27 8:07 ` Thomas Gleixner
2011-03-25 13:21 ` [patch 03/23] arm: Use genirq lockdep helper to set lock class Thomas Gleixner
2011-03-25 13:21 ` [patch 04/23] arm: Use irq flag setter function Thomas Gleixner
2011-03-25 13:21 ` [patch 05/23] arm: msm: Convert to new irq chip functions Thomas Gleixner
2011-03-25 13:21 ` [patch 06/23] arm: Cleanup irq_desc access Thomas Gleixner
2011-03-25 13:21 ` [patch 07/23] arm: plat-samsung: Use proper irq accessor functions Thomas Gleixner
2011-03-25 13:21 ` [patch 08/23] arm: stmp3xxx: Use generic_handle_irq() Thomas Gleixner
2011-03-25 13:21 ` [patch 09/23] arm: nomadik: Use local irq state Thomas Gleixner
2011-03-25 13:22 ` [patch 10/23] arm: plat-omap: Cleanup irq_desc access Thomas Gleixner
2011-03-25 13:22 ` [patch 11/23] arm: msm: Use proper irq accessor functions Thomas Gleixner
2011-03-25 13:22 ` [patch 12/23] arm: vt8500: Use proper irq accessors Thomas Gleixner
2011-03-25 13:22 ` [patch 13/23] arm: mxc: Use generic_handle_irq() Thomas Gleixner
2011-03-25 13:22 ` [patch 14/23] arm: gemini: Use proper irq accessor functions Thomas Gleixner
2011-03-25 13:22 ` [patch 15/23] arm: ep93xx: " Thomas Gleixner
2011-03-25 13:22 ` [patch 16/23] arm: davinci: Cleanup irq chip code Thomas Gleixner
2011-03-25 13:22 ` [patch 17/23] arm: at91: Cleanup irq chip Thomas Gleixner
2011-03-25 21:03 ` Thomas Gleixner
2011-03-27 15:02 ` Sergei Shtylyov
2011-03-27 15:47 ` Thomas Gleixner
2011-03-25 13:22 ` [patch 18/23] arm: gic: Use proper accessor functions Thomas Gleixner
2011-03-25 13:22 ` [patch 19/23] arm: dove: Use proper irq " Thomas Gleixner
2011-03-25 13:22 ` [patch 20/23] arm: Use generic show_interrupts() Thomas Gleixner
2011-03-25 13:22 ` [patch 22/23] arm: Reorder irq_set_ function calls Thomas Gleixner
2011-03-25 13:22 ` [patch 23/23] arm: Fold irq_set_chip/irq_set_handler Thomas Gleixner
2011-03-25 13:22 ` [patch 21/23] arm: Cleanup the irq namespace Thomas Gleixner
2011-04-18 17:43 ` H Hartley Sweeten
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110325131617.258789658@linutronix.de \
--to=tglx@linutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).