[PATCH RFC] ARM: PXA27x: CPUFREQ: Don't use fastbus mode

[anarsoul@gmail.com (Vasily Khoruzhick)]

On Sunday 27 March 2011 13:09:20 Igor Grinberg wrote:
> On 03/27/11 11:48, Vasily Khoruzhick wrote:
> > On Sunday 27 March 2011 12:09:21 Igor Grinberg wrote:
> >> Possibly, but Z2 is not the only one using PXA27x.
> >> And of course you lose performance, unless you don't care,
> >> because if it does not work at all, you don't care about performance,
> >> but again it is wrong to force all PXA27x based boards to this.
> > 
> > Ok, that's why I've sent this patch with RFC in subject - Z2 is the only
> > PXA270-based device I own :)
> > 
> >> cm-x270 and em-x270 work well with fast bus bit set with userspace
> >> governor and with the above frequencies.
> > 
> > What about ondemand and conservative governors?
> 
> I haven't tested those and I don't think I will have an opportunity in the
> near future, but is it really important also to test those? Are they
> different in any special way?

They switch freq rapidly, so they can be used as stability test for cpufreq 
implementation.

Regards
Vasily