From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [pm-core][PATCH v3 01/21] OMAP4: PM: Add omap WakeupGen module support
Date: Mon, 28 Mar 2011 13:50:27 -0700 [thread overview]
Message-ID: <20110328205027.GC30616@atomide.com> (raw)
In-Reply-To: <1301304157-2466-2-git-send-email-santosh.shilimkar@ti.com>
* Santosh Shilimkar <santosh.shilimkar@ti.com> [110328 02:20]:
> --- a/arch/arm/mach-omap2/omap4-common.c
> +++ b/arch/arm/mach-omap2/omap4-common.c
> @@ -21,6 +21,7 @@
>
> #include <mach/hardware.h>
> #include <mach/omap4-common.h>
> +#include <mach/omap-wakeupgen.h>
>
> #ifdef CONFIG_CACHE_L2X0
> void __iomem *l2cache_base;
> @@ -41,6 +42,8 @@ void __init gic_init_irq(void)
> gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
> BUG_ON(!gic_cpu_base);
>
> + omap_wakeupgen_init();
> +
> gic_init(0, 29, gic_dist_base_addr, gic_cpu_base);
> }
Do you really need to initialize all of this that early?
Tony
next prev parent reply other threads:[~2011-03-28 20:50 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-28 9:22 [pm-core][PATCH v3 00/21] OMAP4: PM: suspend, CPU-hotplug and CPUilde support Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 01/21] OMAP4: PM: Add omap WakeupGen module support Santosh Shilimkar
2011-03-28 20:50 ` Tony Lindgren [this message]
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 17:01 ` Tony Lindgren
2011-03-30 6:15 ` Santosh
2011-03-30 18:40 ` Tony Lindgren
2011-03-31 6:28 ` Santosh Shilimkar
2011-04-02 6:10 ` Colin Cross
2011-04-02 9:40 ` Santosh Shilimkar
2011-04-02 19:47 ` Colin Cross
2011-04-03 5:51 ` Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 02/21] OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit Santosh Shilimkar
2011-03-28 20:53 ` Tony Lindgren
2011-03-31 8:35 ` Santosh Shilimkar
2011-03-31 14:04 ` Kevin Hilman
2011-03-31 14:39 ` Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 03/21] OMAP4: PM: Export omap4_get_base*() rather than global address pointers Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 04/21] OMAP4: PM: Add SAR RAM support Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 05/21] OMAP4: PM: Add CPUX OFF mode support Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 06/21] OMAP4: PM: Initialise all the clockdomains to supported states Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 07/21] OMAP4: PM: Program CPU1 to hit OFF when off-lined Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 08/21] OMAP4: PM: CPU1 wakeup workaround from Low power modes Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 09/21] OMAP4: PM: Add GIC distributor and interface enable/disable accessory API Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 10/21] OMAP4: PM: Add GIC save/restore support Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 11/21] OMAP4: PM: Add WakeupGen " Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 12/21] OMAP4: PM: Add L2 cache lowpower support Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 13/21] OMAP4: suspend: Add MPUSS RET and OFF support Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 14/21] OMAP4: pm-debug: Add wakeup timer and debug counters Santosh Shilimkar
2011-03-28 21:00 ` Tony Lindgren
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 6:27 ` Shilimkar, Santosh
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 15/21] OMAP4: cpuidle: Basic CPUidle support Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 16/21] OMAP4: cpuidle: Add MPUSS RET OFF states Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 17/21] OMAP4: cpuidle: Switch to gptimer from twd in deeper C-states Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 18/21] OMAP4: cpuidle: Add CPU hotplug notifier and prepare() hook Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 19/21] OMAP4: Remove un-used do_wfi() macro Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 20/21] OMAP4: PM: Set static dependency between MPUSS-EMIF and MPUSS-L3_1 Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 21/21] OMAP4: PM: Avoid omap4_pm_init() on OMAP4430 ES1.0 Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110328205027.GC30616@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).