* [PATCH] ARM: mx53/loco: add pwm backlight device
@ 2011-03-04 2:51 Jason Chen
2011-04-04 16:08 ` Uwe Kleine-König
0 siblings, 1 reply; 3+ messages in thread
From: Jason Chen @ 2011-03-04 2:51 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Jason Chen <b02280@freescale.com>
---
arch/arm/mach-mx5/Kconfig | 1 +
arch/arm/mach-mx5/board-mx53_loco.c | 11 +++++++++++
arch/arm/mach-mx5/devices-imx53.h | 4 ++++
3 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index f065a0d..baf5223 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -162,6 +162,7 @@ config MACH_MX53_LOCO
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_PWM
help
Include support for MX53 LOCO platform. This includes specific
configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 160899e..3b0b200 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -23,6 +23,7 @@
#include <linux/fec.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
#include <mach/common.h>
#include <mach/hardware.h>
@@ -203,6 +204,13 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
.bitrate = 100000,
};
+static struct platform_pwm_backlight_data loco_pwm_backlight_data = {
+ .pwm_id = 1,
+ .max_brightness = 255,
+ .dft_brightness = 128,
+ .pwm_period_ns = 50000,
+};
+
static void __init mx53_loco_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
@@ -213,6 +221,9 @@ static void __init mx53_loco_board_init(void)
imx53_add_imx2_wdt(0, NULL);
imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
+
+ imx53_add_mxc_pwm(1);
+ imx53_add_mxc_pwm_backlight(0, &loco_pwm_backlight_data);
}
static void __init mx53_loco_timer_init(void)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index 5a1d6c9..a2dc8b6 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -37,3 +37,7 @@ extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst;
extern const struct imx_mxc_pwm_data imx53_mxc_pwm_data[] __initconst;
#define imx53_add_mxc_pwm(id) \
imx_add_mxc_pwm(&imx53_mxc_pwm_data[id])
+
+#define imx53_add_mxc_pwm_backlight(id, pdata) \
+ platform_device_register_resndata(NULL, "pwm-backlight",\
+ id, NULL, 0, pdata, sizeof(*pdata));
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] ARM: mx53/loco: add pwm backlight device
2011-03-04 2:51 [PATCH] ARM: mx53/loco: add pwm backlight device Jason Chen
@ 2011-04-04 16:08 ` Uwe Kleine-König
2011-04-12 23:43 ` Jason Chen
0 siblings, 1 reply; 3+ messages in thread
From: Uwe Kleine-König @ 2011-04-04 16:08 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Mar 04, 2011 at 10:51:26AM +0800, Jason Chen wrote:
> Signed-off-by: Jason Chen <b02280@freescale.com>
> ---
> arch/arm/mach-mx5/Kconfig | 1 +
> arch/arm/mach-mx5/board-mx53_loco.c | 11 +++++++++++
> arch/arm/mach-mx5/devices-imx53.h | 4 ++++
> 3 files changed, 16 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
> index f065a0d..baf5223 100644
> --- a/arch/arm/mach-mx5/Kconfig
> +++ b/arch/arm/mach-mx5/Kconfig
> @@ -162,6 +162,7 @@ config MACH_MX53_LOCO
> select IMX_HAVE_PLATFORM_IMX2_WDT
> select IMX_HAVE_PLATFORM_IMX_I2C
> select IMX_HAVE_PLATFORM_IMX_UART
> + select IMX_HAVE_PLATFORM_MXC_PWM
> help
> Include support for MX53 LOCO platform. This includes specific
> configurations for the board and its peripherals.
> diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
> index 160899e..3b0b200 100644
> --- a/arch/arm/mach-mx5/board-mx53_loco.c
> +++ b/arch/arm/mach-mx5/board-mx53_loco.c
> @@ -23,6 +23,7 @@
> #include <linux/fec.h>
> #include <linux/delay.h>
> #include <linux/gpio.h>
> +#include <linux/pwm_backlight.h>
>
> #include <mach/common.h>
> #include <mach/hardware.h>
> @@ -203,6 +204,13 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
> .bitrate = 100000,
> };
>
> +static struct platform_pwm_backlight_data loco_pwm_backlight_data = {
> + .pwm_id = 1,
> + .max_brightness = 255,
> + .dft_brightness = 128,
> + .pwm_period_ns = 50000,
> +};
> +
> static void __init mx53_loco_board_init(void)
> {
> mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
> @@ -213,6 +221,9 @@ static void __init mx53_loco_board_init(void)
> imx53_add_imx2_wdt(0, NULL);
> imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
> imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
> +
> + imx53_add_mxc_pwm(1);
can you please resend this with the series adding this function when
addressing the comments I just gave.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] ARM: mx53/loco: add pwm backlight device
2011-04-04 16:08 ` Uwe Kleine-König
@ 2011-04-12 23:43 ` Jason Chen
0 siblings, 0 replies; 3+ messages in thread
From: Jason Chen @ 2011-04-12 23:43 UTC (permalink / raw)
To: linux-arm-kernel
hi, Uwe,
Thanks for your comments, I will resend this series patches.
2011/4/5 Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>:
> On Fri, Mar 04, 2011 at 10:51:26AM +0800, Jason Chen wrote:
>> Signed-off-by: Jason Chen <b02280@freescale.com>
>> ---
>> ?arch/arm/mach-mx5/Kconfig ? ? ? ? ? | ? ?1 +
>> ?arch/arm/mach-mx5/board-mx53_loco.c | ? 11 +++++++++++
>> ?arch/arm/mach-mx5/devices-imx53.h ? | ? ?4 ++++
>> ?3 files changed, 16 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
>> index f065a0d..baf5223 100644
>> --- a/arch/arm/mach-mx5/Kconfig
>> +++ b/arch/arm/mach-mx5/Kconfig
>> @@ -162,6 +162,7 @@ config MACH_MX53_LOCO
>> ? ? ? select IMX_HAVE_PLATFORM_IMX2_WDT
>> ? ? ? select IMX_HAVE_PLATFORM_IMX_I2C
>> ? ? ? select IMX_HAVE_PLATFORM_IMX_UART
>> + ? ? select IMX_HAVE_PLATFORM_MXC_PWM
>> ? ? ? help
>> ? ? ? ? Include support for MX53 LOCO platform. This includes specific
>> ? ? ? ? configurations for the board and its peripherals.
>> diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
>> index 160899e..3b0b200 100644
>> --- a/arch/arm/mach-mx5/board-mx53_loco.c
>> +++ b/arch/arm/mach-mx5/board-mx53_loco.c
>> @@ -23,6 +23,7 @@
>> ?#include <linux/fec.h>
>> ?#include <linux/delay.h>
>> ?#include <linux/gpio.h>
>> +#include <linux/pwm_backlight.h>
>>
>> ?#include <mach/common.h>
>> ?#include <mach/hardware.h>
>> @@ -203,6 +204,13 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
>> ? ? ? .bitrate = 100000,
>> ?};
>>
>> +static struct platform_pwm_backlight_data loco_pwm_backlight_data = {
>> + ? ? .pwm_id = 1,
>> + ? ? .max_brightness = 255,
>> + ? ? .dft_brightness = 128,
>> + ? ? .pwm_period_ns = 50000,
>> +};
>> +
>> ?static void __init mx53_loco_board_init(void)
>> ?{
>> ? ? ? mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
>> @@ -213,6 +221,9 @@ static void __init mx53_loco_board_init(void)
>> ? ? ? imx53_add_imx2_wdt(0, NULL);
>> ? ? ? imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
>> ? ? ? imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
>> +
>> + ? ? imx53_add_mxc_pwm(1);
> can you please resend this with the series adding this function when
> addressing the comments I just gave.
>
> Best regards
> Uwe
>
> --
> Pengutronix e.K. ? ? ? ? ? ? ? ? ? ? ? ? ? | Uwe Kleine-K?nig ? ? ? ? ? ?|
> Industrial Linux Solutions ? ? ? ? ? ? ? ? | http://www.pengutronix.de/ ?|
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-04-12 23:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-03-04 2:51 [PATCH] ARM: mx53/loco: add pwm backlight device Jason Chen
2011-04-04 16:08 ` Uwe Kleine-König
2011-04-12 23:43 ` Jason Chen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).