[PATCH 3/3] video: mxsfb: add DOTCLK polarity configuration support

[u.kleine-koenig@pengutronix.de (Uwe Kleine-König)]

On Tue, Apr 05, 2011 at 07:53:04AM +0200, Lothar Wa?mann wrote:
> Hi,
> 
> Shawn Guo writes:
> > On Mon, Apr 04, 2011 at 05:04:30PM +0200, Uwe Kleine-K?nig wrote:
> > > Hello,
> > > 
> > > On Sun, Mar 06, 2011 at 12:18:51AM +0800, Shawn Guo wrote:
> > > > The current implementation provides configuration for HSYNC_POL,
> > > > VSYNC_POL and ENABLE_POL via 'sync' of fb_videomode, but DOTCLK_POL
> > > > is missing there.  It's assuming that data sampling at rising/positive
> > > > edge is always the case.  However, it's not true.  For example, the
> > > > panel on mx28evk board (Seiko 43WVF1G) samples data at
> > > > failing/negative edge.  The patch is to add this configuration.
> > > s/failing/falling?
> > > 
> > > > 
> > > > Also, to unify the naming schema of all these polarity configurations
> > > > and match them with the bits name in Reference Manual, a couple of
> > > > definitions are renamed.
> > > > 
> > > > Lastly, to reduce the chance of defining customized 'FB_SYNC_' flag
> > > > by incrementing the preceeding value, the definitions are changed to
> > > > bit shifting way.
> > > > 
> > > > Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
> > > > ---
> > > >  arch/arm/mach-mxs/include/mach/mxsfb.h |    3 ++-
> > > >  drivers/video/mxsfb.c                  |    8 +++++---
> > > >  2 files changed, 7 insertions(+), 4 deletions(-)
> > > > 
> > > > diff --git a/arch/arm/mach-mxs/include/mach/mxsfb.h b/arch/arm/mach-mxs/include/mach/mxsfb.h
> > > > index 923f397..e4d7979 100644
> > > > --- a/arch/arm/mach-mxs/include/mach/mxsfb.h
> > > > +++ b/arch/arm/mach-mxs/include/mach/mxsfb.h
> > > > @@ -24,7 +24,8 @@
> > > >  #define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
> > > >  #define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
> > > >  
> > > > -#define FB_SYNC_DATA_ENABLE_HIGH_ACT	64
> > > > +#define FB_SYNC_DATA_ENABLE_HIGH_ACT	(1 << 6)
> > > > +#define FB_SYNC_DOTCLK_FAILING_ACT	(1 << 7) /* failing/negtive edge sampling */
> >
> s/FAILING/FALLING/
I implicitly wanted that and tried to express that with my ditto.
IMHO the macro name is the main reason for me to fix it.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |