From mboxrd@z Thu Jan  1 00:00:00 1970
From: shawn.guo@freescale.com (Shawn Guo)
Date: Tue, 12 Apr 2011 16:33:18 +0800
Subject: [PATCH 1/6] ARM: mxc: update defconfigs
In-Reply-To: <20110412080851.GG7771@pengutronix.de>
References: <1302464943-20721-1-git-send-email-u.kleine-koenig@pengutronix.de>
	<20110412075931.GA24855@S2100-06.ap.freescale.net>
	<20110412080851.GG7771@pengutronix.de>
Message-ID: <20110412083317.GB24855@S2100-06.ap.freescale.net>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Tue, Apr 12, 2011 at 10:08:51AM +0200, Uwe Kleine-K?nig wrote:
> On Tue, Apr 12, 2011 at 03:59:32PM +0800, Shawn Guo wrote:
> > Hi Uwe,
> > 
> > On Sun, Apr 10, 2011 at 09:48:58PM +0200, Uwe Kleine-K?nig wrote:
> > > 
> > [...]
> > > Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> > > ---
> > >  arch/arm/configs/mx1_defconfig  |   11 +++-----
> > >  arch/arm/configs/mx21_defconfig |    8 +++---
> > >  arch/arm/configs/mx27_defconfig |   45 ++++++++++++++++++++++++++++----
> > >  arch/arm/configs/mx3_defconfig  |   40 +++++++++++++++++++++--------
> > >  arch/arm/configs/mx51_defconfig |   53 +++++++++++++++++++++++++++++++-------
> > 
> > Would you consider to enable mx5 ESDHC by default?  I guess Linaro
> > will appreciate it, as they are using ext3 rootfs on SD/MMC for their
> > releases.
> I assume this means
> 
> 	+CONFIG_MMC_SDHCI_PLTFM=m
> 	+CONFIG_MMC_SDHCI_ESDHC_IMX=y
> 
To get the system up with rootfs mounted on SD/MMC, I have to do the
following.

CONFIG_MMC_BLOCK=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y

-- 
Regards,
Shawn