From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm: omap2/3: Use generic irq chip
Date: Tue, 19 Apr 2011 02:59:58 -0700 [thread overview]
Message-ID: <20110419095958.GD477@atomide.com> (raw)
In-Reply-To: <20110416211307.781114571@linutronix.de>
Use generic irq chip for omap2 & 3.
Note that this patch also leaves out the spurious IRQ warning
for omap3.
This warning should no longer be needed as the interrupt handlers
for various devices have implemented the necessayr read-back of
the posted write.
Signed-off-by: Tony Lindgren <tony@atomide.com>
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -73,83 +73,18 @@ static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
return __raw_readl(bank->base_reg + reg);
}
-static int previous_irq;
-
-/*
- * On 34xx we can get occasional spurious interrupts if the ack from
- * an interrupt handler does not get posted before we unmask. Warn about
- * the interrupt handlers that need to flush posted writes.
- */
-static int omap_check_spurious(unsigned int irq)
-{
- u32 sir, spurious;
-
- sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR);
- spurious = sir >> 7;
-
- if (spurious) {
- printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush "
- "posted write for irq %i\n",
- irq, sir, previous_irq);
- return spurious;
- }
-
- return 0;
-}
-
/* XXX: FIQ and additional INTC support (only MPU at the moment) */
static void omap_ack_irq(struct irq_data *d)
{
intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL);
}
-static void omap_mask_irq(struct irq_data *d)
-{
- unsigned int irq = d->irq;
- int offset = irq & (~(IRQ_BITS_PER_REG - 1));
-
- if (cpu_is_omap34xx() && !cpu_is_ti816x()) {
- int spurious = 0;
-
- /*
- * INT_34XX_GPT12_IRQ is also the spurious irq. Maybe because
- * it is the highest irq number?
- */
- if (irq == INT_34XX_GPT12_IRQ)
- spurious = omap_check_spurious(irq);
-
- if (!spurious)
- previous_irq = irq;
- }
-
- irq &= (IRQ_BITS_PER_REG - 1);
-
- intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset);
-}
-
-static void omap_unmask_irq(struct irq_data *d)
-{
- unsigned int irq = d->irq;
- int offset = irq & (~(IRQ_BITS_PER_REG - 1));
-
- irq &= (IRQ_BITS_PER_REG - 1);
-
- intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset);
-}
-
static void omap_mask_ack_irq(struct irq_data *d)
{
- omap_mask_irq(d);
+ irq_gc_mask_disable_reg(d);
omap_ack_irq(d);
}
-static struct irq_chip omap_irq_chip = {
- .name = "INTC",
- .irq_ack = omap_mask_ack_irq,
- .irq_mask = omap_mask_irq,
- .irq_unmask = omap_unmask_irq,
-};
-
static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
{
unsigned long tmp;
@@ -186,11 +121,31 @@ int omap_irq_pending(void)
return 0;
}
+static __init void
+omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("INTC", 1, irq_start, base,
+ handle_level_irq);
+ ct = gc->chip_types;
+ ct->chip.irq_ack = omap_mask_ack_irq;
+ ct->chip.irq_mask = irq_gc_mask_disable_reg;
+ ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+
+ ct->regs.ack = INTC_CONTROL;
+ ct->regs.enable = INTC_MIR_CLEAR0;
+ ct->regs.disable = INTC_MIR_SET0;
+ irq_setup_generic_chip(gc, IRQ_MSK(num),
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+}
+
void __init omap_init_irq(void)
{
unsigned long nr_of_irqs = 0;
unsigned int nr_banks = 0;
- int i;
+ int i, j;
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
unsigned long base = 0;
@@ -215,17 +170,15 @@ void __init omap_init_irq(void)
omap_irq_bank_init_one(bank);
+ for (i = 0, j= 0; i < bank->nr_irqs; i += 32, j += 0x20)
+ omap_alloc_gc(bank->base_reg + j, i, 32);
+
nr_of_irqs += bank->nr_irqs;
nr_banks++;
}
printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n",
nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
-
- for (i = 0; i < nr_of_irqs; i++) {
- irq_set_chip_and_handler(i, &omap_irq_chip, handle_level_irq);
- set_irq_flags(i, IRQF_VALID);
- }
}
#ifdef CONFIG_ARCH_OMAP3
next prev parent reply other threads:[~2011-04-19 9:59 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-16 21:14 [RFC patch 00/20] Interrupt chip consolidation Thomas Gleixner
2011-04-16 21:14 ` genirq: Implement a generic interrupt chip Thomas Gleixner
2011-04-18 17:20 ` H Hartley Sweeten
2011-04-18 19:32 ` Thomas Gleixner
2011-04-18 19:43 ` Thomas Gleixner
2011-04-18 20:32 ` H Hartley Sweeten
2011-04-19 7:57 ` Tony Lindgren
2011-04-19 10:01 ` Tony Lindgren
2011-04-20 8:20 ` Abhijeet Dharmapurikar
2011-04-20 9:34 ` Thomas Gleixner
2011-04-16 21:14 ` genirq: Add chip suspend and resume callbacks Thomas Gleixner
2011-04-16 21:14 ` arm: vic: Use generic interrupt chip Thomas Gleixner
2011-04-18 17:34 ` H Hartley Sweeten
2011-04-16 21:14 ` arm: vic: Implement irq_suspend/resume callbacks Thomas Gleixner
2011-04-16 21:14 ` arm: orion: Use generic irq chip Thomas Gleixner
2011-04-20 8:21 ` Abhijeet Dharmapurikar
2011-04-20 8:35 ` Thomas Gleixner
2011-04-16 21:14 ` arm: davinci: " Thomas Gleixner
2011-04-20 0:01 ` Kevin Hilman
2011-04-25 6:50 ` Nori, Sekhar
2011-04-16 21:14 ` arm: bcmring: Use generic irq chip implementation Thomas Gleixner
2011-04-16 21:14 ` arm: samsung: Convert irq-vic-timer to generic irq chip Thomas Gleixner
2011-04-17 21:52 ` Kukjin Kim
2011-04-19 9:59 ` Tony Lindgren [this message]
2011-04-16 21:14 ` arm: samsung: Convert irq_uart " Thomas Gleixner
2011-04-17 21:53 ` Kukjin Kim
2011-04-16 21:14 ` arm: samsung: s5p: Convert irq-gpioint " Thomas Gleixner
2011-04-17 21:51 ` Kukjin Kim
2011-04-16 21:14 ` arm: tcc8k: Convert " Thomas Gleixner
2011-04-16 21:14 ` arm: sa1111: " Thomas Gleixner
2011-04-16 21:14 ` arm: msm: Convert sirc " Thomas Gleixner
2011-04-21 15:13 ` Abhijeet Dharmapurikar
2011-04-16 21:14 ` arm: msm: Convert irq.c chip " Thomas Gleixner
2011-04-16 21:14 ` arm: msm: Convert irq-vic " Thomas Gleixner
2011-04-21 16:53 ` Abhijeet Dharmapurikar
2011-04-21 17:28 ` Thomas Gleixner
2011-04-25 6:11 ` Abhijeet Dharmapurikar
2011-04-25 10:13 ` Linus Walleij
2011-04-16 21:14 ` arm: msm: Cleanup the irq.c code some more Thomas Gleixner
2011-04-16 21:14 ` arm: msm: Use irq-vic for all vic instances Thomas Gleixner
2011-04-16 21:14 ` arm: msm: Consolidate more Thomas Gleixner
2011-04-16 21:14 ` arm: pxa: Convert SC and GPIO-l to generic irq chips Thomas Gleixner
2011-04-19 8:22 ` [RFC patch 00/20] Interrupt chip consolidation Lars-Peter Clausen
2011-04-19 9:41 ` Thomas Gleixner
2011-04-19 10:10 ` Lars-Peter Clausen
2011-04-19 10:26 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110419095958.GD477@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).