* [PATCH 1/5] OMAP2+: hwmod data: Fix wrong dma_system end address
2011-04-20 19:28 [PATCH 0/5] OMAP hwmod/PRCM/clock: patches for 2.6.39-rc Paul Walmsley
@ 2011-04-20 19:28 ` Paul Walmsley
2011-04-20 19:28 ` [PATCH 2/5] OMAP4: clock data: Change DSS clock aliases Paul Walmsley
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Paul Walmsley @ 2011-04-20 19:28 UTC (permalink / raw)
To: linux-arm-kernel
From: Benoit Cousson <b-cousson@ti.com>
OMAP2420, 2430 and 3xxx were using the OMAP4 end address
that unfortunately is not located at the same base address.
Moreover the OMAP4 size was set to 256 instead of 4096.
Change all .pa_end to set them to .pa_start + 0xfff
Cc: "G, Manjunath Kondaiah" <manjugk@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Reported-by: Michael Fillinger <m-fillinger@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 8eb3ce1..f50e56a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1782,7 +1782,7 @@ static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = {
static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
- .pa_end = 0x4a0560ff,
+ .pa_end = 0x48056fff,
.flags = ADDR_TYPE_RT
},
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index e6e3810..96753f7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1915,7 +1915,7 @@ static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = {
static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
- .pa_end = 0x4a0560ff,
+ .pa_end = 0x48056fff,
.flags = ADDR_TYPE_RT
},
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index b98e2df..9bee155 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -2386,7 +2386,7 @@ static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = {
static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
- .pa_end = 0x4a0560ff,
+ .pa_end = 0x48056fff,
.flags = ADDR_TYPE_RT
},
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 3e88dd3..abc548a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -885,7 +885,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = {
static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
{
.pa_start = 0x4a056000,
- .pa_end = 0x4a0560ff,
+ .pa_end = 0x4a056fff,
.flags = ADDR_TYPE_RT
},
};
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 2/5] OMAP4: clock data: Change DSS clock aliases
2011-04-20 19:28 [PATCH 0/5] OMAP hwmod/PRCM/clock: patches for 2.6.39-rc Paul Walmsley
2011-04-20 19:28 ` [PATCH 1/5] OMAP2+: hwmod data: Fix wrong dma_system end address Paul Walmsley
@ 2011-04-20 19:28 ` Paul Walmsley
2011-04-20 19:28 ` [PATCH 3/5] OMAP2+: PM: Fix the saving of CM_AUTOIDLE_PLL register on scratchpad area Paul Walmsley
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Paul Walmsley @ 2011-04-20 19:28 UTC (permalink / raw)
To: linux-arm-kernel
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
DSS driver has used fck and ick clocks on OMAP2/3 to get DSS HW up and
running, and also to get the pixel clock's source clock rate from the
fck.
On OMAP4 the clock data is set up in a different way, as there's no ick,
dss_fck points to a fake clock which just affects DSS's MODULEMODE, and
dss_dss_clk if the DSS_FCK.
>From DSS driver's point of view the dss_fck sounds like an ick, and
dss_dss_clk is the fck. While this is not entirely correct from HW point
of view, especially for the ick, configuring the clock aliases that way
makes DSS "just work" with OMAP4's clock setup.
In the (hopefully near) future DSS driver will be reworked to use
pm_runtime support which should clean up the clock code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Beno?t Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/clock44xx_data.c | 9 ++-------
1 files changed, 2 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 276992d..8c96567 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3116,14 +3116,9 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "dsp_fck", &dsp_fck, CK_443X),
CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X),
CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X),
- CLK("omapdss_dss", "dss_clk", &dss_dss_clk, CK_443X),
CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X),
- CLK("omapdss_dss", "fck", &dss_fck, CK_443X),
- /*
- * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility
- * with OMAP2/3.
- */
- CLK("omapdss_dss", "ick", &dummy_ck, CK_443X),
+ CLK("omapdss_dss", "fck", &dss_dss_clk, CK_443X),
+ CLK("omapdss_dss", "ick", &dss_fck, CK_443X),
CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X),
CLK(NULL, "emif1_fck", &emif1_fck, CK_443X),
CLK(NULL, "emif2_fck", &emif2_fck, CK_443X),
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 3/5] OMAP2+: PM: Fix the saving of CM_AUTOIDLE_PLL register on scratchpad area
2011-04-20 19:28 [PATCH 0/5] OMAP hwmod/PRCM/clock: patches for 2.6.39-rc Paul Walmsley
2011-04-20 19:28 ` [PATCH 1/5] OMAP2+: hwmod data: Fix wrong dma_system end address Paul Walmsley
2011-04-20 19:28 ` [PATCH 2/5] OMAP4: clock data: Change DSS clock aliases Paul Walmsley
@ 2011-04-20 19:28 ` Paul Walmsley
2011-04-20 19:28 ` [PATCH 4/5] OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL Paul Walmsley
2011-04-20 19:28 ` [PATCH 5/5] OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup Paul Walmsley
4 siblings, 0 replies; 6+ messages in thread
From: Paul Walmsley @ 2011-04-20 19:28 UTC (permalink / raw)
To: linux-arm-kernel
From: Eduardo Valentin <eduardo.valentin@ti.com>
The saving of CCR.CM_AUTOIDLE_PLL is done in scratchpad area.
However, in current code, the saving is done for CM_AUTOIDLE2_PLL
(offset 0x34) instead of CM_AUTOIDLE_PLL (offset 0x30).
This patch changes the code to save the correct register.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/control.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 6952794..df0c75c 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -317,7 +317,7 @@ void omap3_save_scratchpad_contents(void)
prcm_block_contents.cm_clken_pll =
omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
prcm_block_contents.cm_autoidle_pll =
- omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+ omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
prcm_block_contents.cm_clksel1_pll =
omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
prcm_block_contents.cm_clksel2_pll =
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 4/5] OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL
2011-04-20 19:28 [PATCH 0/5] OMAP hwmod/PRCM/clock: patches for 2.6.39-rc Paul Walmsley
` (2 preceding siblings ...)
2011-04-20 19:28 ` [PATCH 3/5] OMAP2+: PM: Fix the saving of CM_AUTOIDLE_PLL register on scratchpad area Paul Walmsley
@ 2011-04-20 19:28 ` Paul Walmsley
2011-04-20 19:28 ` [PATCH 5/5] OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup Paul Walmsley
4 siblings, 0 replies; 6+ messages in thread
From: Paul Walmsley @ 2011-04-20 19:28 UTC (permalink / raw)
To: linux-arm-kernel
From: Eduardo Valentin <eduardo.valentin@ti.com>
As per OMAP3 erratum (i671), ROM code adds extra latencies while
restoring CM_AUTOIDLE_PLL register, if AUTO_PERIPH_DPLL is equal to 1.
This patch stores 0's in scratchpad content area corresponding to
AUTO_PERIPH_DPLL, to prevent ROM code to try to lock per DPLL, since
it won't respect proper programing scheme.
This register is then stored in prcm context. The saving and restore
is now done by kernel side.
Here follow the erratum description
DESCRIPTION
After OFF mode transition, among many restorations, the ROM Code restores the
CM_AUTOIDLE_PLL register, and after that, it tries to relock the PER DPLL.
In case the restoration data stored in scratchpad memory contains a field
CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL = 1, then the way the ROM Code restores and
locks the PER DPLL does not respect the PER DPLL programming scheme.
In that case, the DPLL might not lock. Meanwhile, when trying to lock the PER
DPLL, the ROM Code does not hang. Only extra latencies are introduced at
wake-up.
WORKAROUND
When saving the context-restore structure in scratchpad memory, in order to
respect the PER DPLL programming scheme, it is advised to store 0 in the
CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL field of the saved structure.
After wake-up, the application should store in CM_AUTOIDLE_PLL register the
right desired value.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/cm2xxx_3xxx.c | 17 +++++++++++++++++
arch/arm/mach-omap2/control.c | 8 +++++++-
2 files changed, 24 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c
index 9d0dec8..38830d8 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c
@@ -247,6 +247,7 @@ struct omap3_cm_regs {
u32 per_cm_clksel;
u32 emu_cm_clksel;
u32 emu_cm_clkstctrl;
+ u32 pll_cm_autoidle;
u32 pll_cm_autoidle2;
u32 pll_cm_clksel4;
u32 pll_cm_clksel5;
@@ -319,6 +320,15 @@ void omap3_cm_save_context(void)
omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
cm_context.emu_cm_clkstctrl =
omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL);
+ /*
+ * As per erratum i671, ROM code does not respect the PER DPLL
+ * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
+ * In this case, even though this register has been saved in
+ * scratchpad contents, we need to restore AUTO_PERIPH_DPLL
+ * by ourselves. So, we need to save it anyway.
+ */
+ cm_context.pll_cm_autoidle =
+ omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
cm_context.pll_cm_autoidle2 =
omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
cm_context.pll_cm_clksel4 =
@@ -441,6 +451,13 @@ void omap3_cm_restore_context(void)
CM_CLKSEL1);
omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
OMAP2_CM_CLKSTCTRL);
+ /*
+ * As per erratum i671, ROM code does not respect the PER DPLL
+ * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
+ * In this case, we need to restore AUTO_PERIPH_DPLL by ourselves.
+ */
+ omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD,
+ CM_AUTOIDLE);
omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD,
CM_AUTOIDLE2);
omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD,
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index df0c75c..da53ba3 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -316,8 +316,14 @@ void omap3_save_scratchpad_contents(void)
omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
prcm_block_contents.cm_clken_pll =
omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+ /*
+ * As per erratum i671, ROM code does not respect the PER DPLL
+ * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
+ * Then, in anycase, clear these bits to avoid extra latencies.
+ */
prcm_block_contents.cm_autoidle_pll =
- omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+ omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
+ ~OMAP3430_AUTO_PERIPH_DPLL_MASK;
prcm_block_contents.cm_clksel1_pll =
omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
prcm_block_contents.cm_clksel2_pll =
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 5/5] OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.
2011-04-20 19:28 [PATCH 0/5] OMAP hwmod/PRCM/clock: patches for 2.6.39-rc Paul Walmsley
` (3 preceding siblings ...)
2011-04-20 19:28 ` [PATCH 4/5] OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL Paul Walmsley
@ 2011-04-20 19:28 ` Paul Walmsley
4 siblings, 0 replies; 6+ messages in thread
From: Paul Walmsley @ 2011-04-20 19:28 UTC (permalink / raw)
To: linux-arm-kernel
From: Avinash.H.M <avinashhm@ti.com>
GPIO module expects the debounce clocks to be enabled during reset. It doesn't
reset properly and timeouts are seen, if this clock isn't enabled during
reset. Add the HWMOD_CONTROL_OPT_CLKS_IN_RESET flags to the GPIO HWMODs, with
which the debounce clocks are enabled during reset.
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Avinash.H.M <avinashhm@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 4 ++++
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 5 +++++
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 ++++++
3 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index f50e56a..c4d0ae8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1639,6 +1639,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
static struct omap_hwmod omap2420_gpio1_hwmod = {
.name = "gpio1",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap242x_gpio1_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio1_irqs),
.main_clk = "gpios_fck",
@@ -1669,6 +1670,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
static struct omap_hwmod omap2420_gpio2_hwmod = {
.name = "gpio2",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap242x_gpio2_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio2_irqs),
.main_clk = "gpios_fck",
@@ -1699,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
static struct omap_hwmod omap2420_gpio3_hwmod = {
.name = "gpio3",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap242x_gpio3_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio3_irqs),
.main_clk = "gpios_fck",
@@ -1729,6 +1732,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
static struct omap_hwmod omap2420_gpio4_hwmod = {
.name = "gpio4",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap242x_gpio4_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio4_irqs),
.main_clk = "gpios_fck",
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 96753f7..9682dd5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1742,6 +1742,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
static struct omap_hwmod omap2430_gpio1_hwmod = {
.name = "gpio1",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio1_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio1_irqs),
.main_clk = "gpios_fck",
@@ -1772,6 +1773,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
static struct omap_hwmod omap2430_gpio2_hwmod = {
.name = "gpio2",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio2_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio2_irqs),
.main_clk = "gpios_fck",
@@ -1802,6 +1804,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
static struct omap_hwmod omap2430_gpio3_hwmod = {
.name = "gpio3",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio3_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio3_irqs),
.main_clk = "gpios_fck",
@@ -1832,6 +1835,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
static struct omap_hwmod omap2430_gpio4_hwmod = {
.name = "gpio4",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio4_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio4_irqs),
.main_clk = "gpios_fck",
@@ -1862,6 +1866,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
static struct omap_hwmod omap2430_gpio5_hwmod = {
.name = "gpio5",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio5_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio5_irqs),
.main_clk = "gpio5_fck",
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 9bee155..909a84d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -2141,6 +2141,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
static struct omap_hwmod omap3xxx_gpio1_hwmod = {
.name = "gpio1",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio1_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio1_irqs),
.main_clk = "gpio1_ick",
@@ -2177,6 +2178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
static struct omap_hwmod omap3xxx_gpio2_hwmod = {
.name = "gpio2",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio2_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio2_irqs),
.main_clk = "gpio2_ick",
@@ -2213,6 +2215,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
static struct omap_hwmod omap3xxx_gpio3_hwmod = {
.name = "gpio3",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio3_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio3_irqs),
.main_clk = "gpio3_ick",
@@ -2249,6 +2252,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
static struct omap_hwmod omap3xxx_gpio4_hwmod = {
.name = "gpio4",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio4_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio4_irqs),
.main_clk = "gpio4_ick",
@@ -2285,6 +2289,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
static struct omap_hwmod omap3xxx_gpio5_hwmod = {
.name = "gpio5",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio5_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio5_irqs),
.main_clk = "gpio5_ick",
@@ -2321,6 +2326,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
static struct omap_hwmod omap3xxx_gpio6_hwmod = {
.name = "gpio6",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio6_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio6_irqs),
.main_clk = "gpio6_ick",
^ permalink raw reply related [flat|nested] 6+ messages in thread