From mboxrd@z Thu Jan 1 00:00:00 1970 From: ivan.nazarenko@gmail.com (Ivan Nazarenko) Date: Tue, 17 May 2011 14:14:33 -0300 Subject: [PATCH 1/2] mt9p031: Add mt9p031 sensor driver. In-Reply-To: References: <1305624528-5595-1-git-send-email-javier.martin@vista-silicon.com> Message-ID: <201105171414.34179.ivan.nazarenko@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Javier, I have been using the aptina patch (https://github.com/Aptina/BeagleBoard-xM) on beagleboard while waiting linux-media solve this mt9p031 issue. Now that you have something working, I would like to try it - but I would like to know what is the clock rate you actually drove the sensor. Reviewing your path, I suppose it is 54MHz, so you would be achieving some 10 full 5MPix frames/s from the sensor. Is that correct? (the aptina patch delivers less than 4 fps). Regards, Ivan On Tuesday, May 17, 2011 08:59:04 javier Martin wrote: > On 17 May 2011 13:47, Guennadi Liakhovetski wrote: > > Hi Laurent > > > > Thanks for your review! Javier, if you like, you can wait a couple of days > > until I find some time to review the driver, or you can submit a version, > > addressing Laurent's points, but be prepared to have to do another one;) > > > > Thanks > > Guennadi > > --- > > Guennadi Liakhovetski, Ph.D. > > Freelance Open-Source Software Developer > > http://www.open-technology.de/ > > > > OK, I think I'll wait to have Guennadi's review too. > Thank you both. > >