From mboxrd@z Thu Jan 1 00:00:00 1970 From: s.hauer@pengutronix.de (Sascha Hauer) Date: Mon, 30 May 2011 08:45:02 +0200 Subject: [PATCH v2 0/2] Move Freescale MXS gpio driver into drivers/gpio In-Reply-To: <1306595374-25178-1-git-send-email-shawn.guo@linaro.org> References: <1306595374-25178-1-git-send-email-shawn.guo@linaro.org> Message-ID: <20110530064502.GC23771@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Grant, I suppose we should take this through the architecture tree. Can I have your Ack for this? Sascha On Sat, May 28, 2011 at 11:09:32PM +0800, Shawn Guo wrote: > The patch set moves Freescale MXS gpio driver from mach-mxs into > drivers/gpio. > > Changes since v1: > * Squash the 4 gpio-mxs patches into one > * Do not add new gpio Kconfig option and use ARCH_MXS directly > * Clean up platform-gpio-mxs.c per Arnd's comments > * Add device mxs_apbh_bus and set it as the parent of gpio devices > > Shawn Guo (2): > gpio: gpio-mxs: add gpio driver for Freescale MXS architecture > ARM: mxs: use gpio-mxs driver by adding platform device > > arch/arm/mach-mxs/Makefile | 2 +- > arch/arm/mach-mxs/devices.c | 11 + > arch/arm/mach-mxs/devices/Makefile | 1 + > arch/arm/mach-mxs/devices/platform-gpio-mxs.c | 53 +++++ > arch/arm/mach-mxs/gpio.h | 34 --- > arch/arm/mach-mxs/include/mach/devices-common.h | 2 + > arch/arm/mach-mxs/mach-mx28evk.c | 1 - > arch/arm/mach-mxs/mm-mx23.c | 1 - > arch/arm/mach-mxs/mm-mx28.c | 1 - > drivers/gpio/Makefile | 1 + > .../arm/mach-mxs/gpio.c => drivers/gpio/gpio-mxs.c | 228 ++++++++++++-------- > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |