[PATCH v2 6/7] gpio_msm: Move Qualcomm v6 MSM driver into drivers

[grant.likely@secretlab.ca (Grant Likely)]

On Fri, Jun 03, 2011 at 03:44:18PM -0700, David Brown wrote:
> Migrate the driver for the v6-based MSM chips into drivers/gpio.  The
> driver is unchanged, only moved.
> 
> Signed-off-by: David Brown <davidb@codeaurora.org>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>

Hi David,

Comments below.  When you repost, please cc me on the entire
series, not just the last 2.

> ---
>  arch/arm/mach-msm/Kconfig                          |    3 +++
>  arch/arm/mach-msm/Makefile                         |    2 --
>  drivers/gpio/Kconfig                               |    8 ++++++++
>  drivers/gpio/Makefile                              |    1 +
>  arch/arm/mach-msm/gpio.c => drivers/gpio/msm_v1.c  |    7 +++----

drivers/gpio/gpio-msm-v1.c please.  I'm now enforcing a gpio-*.c naming
convention in this directory.  The other drivers will be renamed soon.

>  .../mach-msm/gpio_hw.h => drivers/gpio/msm_v1.h    |    9 ++++-----
>  6 files changed, 19 insertions(+), 11 deletions(-)
>  rename arch/arm/mach-msm/gpio.c => drivers/gpio/msm_v1.c (98%)
>  rename arch/arm/mach-msm/gpio_hw.h => drivers/gpio/msm_v1.h (98%)
> 
> diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
> index 1516896..cc7c0b2 100644
> --- a/arch/arm/mach-msm/Kconfig
> +++ b/arch/arm/mach-msm/Kconfig
> @@ -11,6 +11,7 @@ config ARCH_MSM7X00A
>  	select MSM_SMD
>  	select MSM_SMD_PKG3
>  	select CPU_V6
> +	select GPIO_MSM_V1
>  	select MSM_PROC_COMM
>  	select HAS_MSM_DEBUG_UART_PHYS
>  
> @@ -22,6 +23,7 @@ config ARCH_MSM7X30
>  	select MSM_VIC
>  	select CPU_V7
>  	select MSM_GPIOMUX
> +	select GPIO_MSM_V1
>  	select MSM_PROC_COMM
>  	select HAS_MSM_DEBUG_UART_PHYS
>  
> @@ -33,6 +35,7 @@ config ARCH_QSD8X50
>  	select MSM_VIC
>  	select CPU_V7
>  	select MSM_GPIOMUX
> +	select GPIO_MSM_V1
>  	select MSM_PROC_COMM
>  	select HAS_MSM_DEBUG_UART_PHYS
>  
> diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
> index 9519fd2..c0709af 100644
> --- a/arch/arm/mach-msm/Makefile
> +++ b/arch/arm/mach-msm/Makefile
> @@ -34,6 +34,4 @@ ifndef CONFIG_ARCH_MSM8960
>  # TODO: TLMM Mapping issues need to be resolved
>  obj-y	+= gpio-v2.o
>  endif
> -else
> -obj-y	+= gpio.o
>  endif
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 4a7f631..c19ecd6a 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -164,6 +164,14 @@ config GPIO_VX855
>  	  additional drivers must be enabled in order to use the
>  	  functionality of the device.
>  
> +config GPIO_MSM_V1
> +	tristate "Qualcomm MSM GPIO v1"
> +	depends on GPIOLIB && ARCH_MSM
> +	help
> +	  Say yes here to support the GPIO interface on ARM v6 based
> +	  Qualcomm MSM chips.  Most of the pins on the MSM can be
> +	  selected for GPIO, and are controlled by this driver.
> +

The kconfig entries are pseudo-alphabetically sorted.  This entry
should be higher in the list.

>  comment "I2C GPIO expanders:"
>  
>  config GPIO_MAX7300
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index b605f8e..2a7c24c 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_GPIO_RDC321X)	+= rdc321x-gpio.o
>  obj-$(CONFIG_GPIO_JANZ_TTL)	+= janz-ttl.o
>  obj-$(CONFIG_GPIO_SX150X)	+= sx150x.o
>  obj-$(CONFIG_GPIO_VX855)	+= vx855_gpio.o
> +obj-$(CONFIG_GPIO_MSM_V1)	+= msm_v1.o

Ditto

>  obj-$(CONFIG_GPIO_ML_IOH)	+= ml_ioh_gpio.o
>  obj-$(CONFIG_AB8500_GPIO)       += ab8500-gpio.o
>  obj-$(CONFIG_GPIO_TPS65910)	+= tps65910-gpio.o
> diff --git a/arch/arm/mach-msm/gpio.c b/drivers/gpio/msm_v1.c
> similarity index 98%
> rename from arch/arm/mach-msm/gpio.c
> rename to drivers/gpio/msm_v1.c
> index 6767deb..89ed35b 100644
> --- a/arch/arm/mach-msm/gpio.c
> +++ b/drivers/gpio/msm_v1.c
> @@ -1,7 +1,6 @@
> -/* linux/arch/arm/mach-msm/gpio.c
> - *
> +/*
>   * Copyright (C) 2007 Google, Inc.
> - * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
> + * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
>   *
>   * This software is licensed under the terms of the GNU General Public
>   * License version 2, as published by the Free Software Foundation, and
> @@ -22,7 +21,7 @@
>  #include <linux/module.h>
>  #include <mach/cpu.h>
>  #include <mach/msm_gpiomux.h>
> -#include "gpio_hw.h"
> +#include "msm_v1.h"

What is the purpose of this header?  Does anything else include it?
If not, then it should be squashed into the .c file.

>  
>  #define FIRST_GPIO_IRQ MSM_GPIO_TO_INT(0)
>  
> diff --git a/arch/arm/mach-msm/gpio_hw.h b/drivers/gpio/msm_v1.h
> similarity index 98%
> rename from arch/arm/mach-msm/gpio_hw.h
> rename to drivers/gpio/msm_v1.h
> index ba7972a..a3e3cb2 100644
> --- a/arch/arm/mach-msm/gpio_hw.h
> +++ b/drivers/gpio/msm_v1.h
> @@ -1,8 +1,7 @@
> -/* arch/arm/mach-msm/gpio_hw.h
> - *
> +/*
>   * Copyright (C) 2007 Google, Inc.
>   * Author: Brian Swetland <swetland@google.com>
> - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
> + * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
>   *
>   * This software is licensed under the terms of the GNU General Public
>   * License version 2, as published by the Free Software Foundation, and
> @@ -15,8 +14,8 @@
>   *
>   */
>  
> -#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_H
> -#define __ARCH_ARM_MACH_MSM_GPIO_HW_H
> +#ifndef _MSM_GPIO_V1_H
> +#define _MSM_GPIO_V1_H
>  
>  #include <mach/msm_iomap.h>
>  
> -- 
> Sent by an employee of the Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
>