From: mika.westerberg@iki.fi (Mika Westerberg)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/5] ep93xx DMA patches
Date: Sun, 5 Jun 2011 11:19:04 +0300 [thread overview]
Message-ID: <20110605081904.GA16018@acer> (raw)
In-Reply-To: <cover.1306662317.git.mika.westerberg@iki.fi>
Vinod,
As this series has acks for all the subsystem maintainers, would it be ok for
you to take the entire series via your tree? Or do you have any idea how to
get it merged?
On Sun, May 29, 2011 at 01:10:01PM +0300, Mika Westerberg wrote:
> This is an updated version of the ep93xx DMA patches. Previous version can be
> found here: https://lkml.org/lkml/2011/5/22/86.
>
> Changes to v1:
> * removed unnecessary header
> * corrected SPI driver documentation
> * DMA driver platform code is only compiled when CONFIG_EP93XX_DMA is
> enabled
>
> I tried to put all the acks in place, hope I got them right.
>
> There is a dependency between patch 1 and patch 4 which I'm not entirely sure
> how to solve. Basically it is required that we have patch 1 applied before
> patch 4 or merge conflict results.
>
> Otherwise it shouldn't matter in which order the patches arrive to the
> mainline.
>
> Unless someone has a better idea, I suggest that these patches will go through
> their respective subsystem trees. All the maintainers should be copied.
>
> Thanks,
> MW
>
> Mika Westerberg (5):
> dmaengine: add ep93xx DMA support
> ep93xx: add dmaengine platform code
> ASoC: ep93xx: convert to use the DMA engine API
> ep93xx: remove the old M2P DMA code
> spi/ep93xx: add DMA support
>
> Documentation/spi/ep93xx_spi | 10 +
> arch/arm/mach-ep93xx/Makefile | 4 +-
> arch/arm/mach-ep93xx/core.c | 6 +-
> arch/arm/mach-ep93xx/dma-m2p.c | 411 -------
> arch/arm/mach-ep93xx/dma.c | 108 ++
> arch/arm/mach-ep93xx/include/mach/dma.h | 190 ++---
> arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h | 2 +
> drivers/dma/Kconfig | 7 +
> drivers/dma/Makefile | 1 +
> drivers/dma/ep93xx_dma.c | 1355 ++++++++++++++++++++++++
> drivers/spi/ep93xx_spi.c | 303 +++++-
> sound/soc/ep93xx/ep93xx-ac97.c | 4 +-
> sound/soc/ep93xx/ep93xx-i2s.c | 4 +-
> sound/soc/ep93xx/ep93xx-pcm.c | 137 ++--
> 14 files changed, 1930 insertions(+), 612 deletions(-)
> delete mode 100644 arch/arm/mach-ep93xx/dma-m2p.c
> create mode 100644 arch/arm/mach-ep93xx/dma.c
> create mode 100644 drivers/dma/ep93xx_dma.c
>
> --
> 1.7.4.4
next prev parent reply other threads:[~2011-06-05 8:19 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-29 10:10 [PATCH v2 0/5] ep93xx DMA patches Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 1/5] dmaengine: add ep93xx DMA support Mika Westerberg
2011-11-15 15:02 ` Rafal Prylowski
2011-11-15 17:59 ` H Hartley Sweeten
2011-11-16 6:48 ` Mika Westerberg
2011-11-16 9:00 ` Rafal Prylowski
2011-11-16 6:55 ` Mika Westerberg
2011-11-16 8:31 ` Rafal Prylowski
2011-11-19 12:38 ` Mika Westerberg
2011-11-21 7:44 ` Rafal Prylowski
2011-11-21 8:01 ` Mika Westerberg
2011-11-21 8:32 ` Vinod Koul
2011-11-22 5:59 ` Mika Westerberg
2011-11-23 10:47 ` Vinod Koul
2011-11-21 8:54 ` Rafal Prylowski
2011-11-22 6:47 ` Mika Westerberg
2011-11-22 8:45 ` Rafal Prylowski
2011-05-29 10:10 ` [PATCH v2 2/5] ep93xx: add dmaengine platform code Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 3/5] ASoC: ep93xx: convert to use the DMA engine API Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 4/5] ep93xx: remove the old M2P DMA code Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 5/5] spi/ep93xx: add DMA support Mika Westerberg
2011-06-03 20:44 ` Grant Likely
2011-06-07 17:14 ` Mika Westerberg
2011-06-07 18:45 ` Grant Likely
2011-06-07 19:06 ` Mika Westerberg
2011-06-07 19:18 ` Grant Likely
2011-06-07 19:29 ` Mika Westerberg
2011-06-07 19:40 ` Grant Likely
2011-06-08 3:58 ` Koul, Vinod
2011-06-08 21:53 ` Grant Likely
2011-06-09 16:42 ` Koul, Vinod
2011-06-09 18:46 ` Grant Likely
2011-06-09 19:15 ` Mika Westerberg
2011-06-05 8:19 ` Mika Westerberg [this message]
2011-06-06 6:39 ` [PATCH v2 0/5] ep93xx DMA patches Koul, Vinod
2011-06-06 16:42 ` Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110605081904.GA16018@acer \
--to=mika.westerberg@iki.fi \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).