[PATCH v4 1/2] gpio/mxc: Move Freescale MXC gpio driver to drivers/gpio

[grant.likely@secretlab.ca (Grant Likely)]

On Mon, Jun 06, 2011 at 12:07:54AM +0800, Shawn Guo wrote:
> GPIO drivers are getting moved to drivers/gpio for cleanup and
> consolidation.  This patch moves the plat-mxc driver.  Follow up
> patches will clean it up and make it a fine upstanding gpio driver.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Applied, thanks.

> ---
>  arch/arm/plat-mxc/Makefile                         |    2 +-
>  drivers/gpio/Kconfig                               |    4 ++++
>  drivers/gpio/Makefile                              |    1 +
>  .../arm/plat-mxc/gpio.c => drivers/gpio/gpio-mxc.c |    0
>  4 files changed, 6 insertions(+), 1 deletions(-)
>  rename arch/arm/plat-mxc/gpio.c => drivers/gpio/gpio-mxc.c (100%)
> 
> diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
> index a138787..d53c35f 100644
> --- a/arch/arm/plat-mxc/Makefile
> +++ b/arch/arm/plat-mxc/Makefile
> @@ -3,7 +3,7 @@
>  #
>  
>  # Common support
> -obj-y := clock.o gpio.o time.o devices.o cpu.o system.o irq-common.o
> +obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
>  
>  # MX51 uses the TZIC interrupt controller, older platforms use AVIC
>  obj-$(CONFIG_MXC_TZIC) += tzic.o
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 18c0b31..5f00b41 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -93,6 +93,10 @@ config GPIO_EXYNOS4
>  	help
>  	  Say yes here to support Samsung Exynos4 series SoCs GPIO library
>  
> +config GPIO_MXC
> +	def_bool y
> +	depends on ARCH_MXC
> +
>  config GPIO_PLAT_SAMSUNG
>  	bool "Samsung SoCs GPIO library support"
>  	default y
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 4ac7cb3..2fb0d00 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_GPIO_BASIC_MMIO_CORE)	+= basic_mmio_gpio.o
>  obj-$(CONFIG_GPIO_BASIC_MMIO)	+= basic_mmio_gpio.o
>  obj-$(CONFIG_GPIO_EXYNOS4)	+= gpio-exynos4.o
>  obj-$(CONFIG_GPIO_I801)		+= gpio-i801.o
> +obj-$(CONFIG_GPIO_MXC)		+= gpio-mxc.o
>  obj-$(CONFIG_GPIO_PLAT_SAMSUNG)	+= gpio-plat-samsung.o
>  obj-$(CONFIG_GPIO_S5PC100)	+= gpio-s5pc100.o
>  obj-$(CONFIG_GPIO_S5PV210)	+= gpio-s5pv210.o
> diff --git a/arch/arm/plat-mxc/gpio.c b/drivers/gpio/gpio-mxc.c
> similarity index 100%
> rename from arch/arm/plat-mxc/gpio.c
> rename to drivers/gpio/gpio-mxc.c
> -- 
> 1.7.4.1
>