From mboxrd@z Thu Jan 1 00:00:00 1970 From: dave.martin@linaro.org (Dave Martin) Date: Tue, 7 Jun 2011 17:18:27 +0100 Subject: [PATCH 07/11] ARM: proc: add proc info for Cortex-A15MP using classic page tables In-Reply-To: <1307379355-13802-8-git-send-email-will.deacon@arm.com> References: <1307379355-13802-1-git-send-email-will.deacon@arm.com> <1307379355-13802-8-git-send-email-will.deacon@arm.com> Message-ID: <20110607161827.GC19855@arm.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Jun 06, 2011 at 05:55:51PM +0100, Will Deacon wrote: > Multicore implementations of the Cortex-A15 require bit 6 of the > auxiliary control register to be set in order for cache and TLB > maintenance operations to be broadcast between CPUs. > > This patch adds a new proc_info structure for Cortex-A15, which enables > the SMP bit during setup and includes the new HWCAPs for integer > division and VFPv4. > > Signed-off-by: Will Deacon > --- > arch/arm/mm/proc-v7.S | 20 ++++++++++++++++++-- > 1 files changed, 18 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S > index 8eba506..1e74e16 100644 > --- a/arch/arm/mm/proc-v7.S > +++ b/arch/arm/mm/proc-v7.S > @@ -275,12 +275,18 @@ cpu_resume_l1_flags: > */ > __v7_ca5mp_setup: > __v7_ca9mp_setup: > + mov r10, #(1 << 0) @ TLB ops broadcasting > + b 1f > +__v7_ca15mp_setup: > + mov r10, #0 > +1: > #ifdef CONFIG_SMP > ALT_SMP(mrc p15, 0, r0, c1, c0, 1) > ALT_UP(mov r0, #(1 << 6)) @ fake it for UP > tst r0, #(1 << 6) @ SMP/nAMP mode enabled? > - orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and > - mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting > + orreq r0, r0, #(1 << 6) @ Enable SMP/nAMP mode > + orreq r0, r0, r10 @ Enable CPU-specific SMP bits > + mcreq p15, 0, r0, c1, c0, 1 > #endif > __v7_setup: > adr r12, __v7_setup_stack @ the local stack > @@ -480,6 +486,16 @@ __v7_ca9mp_proc_info: > .size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info > > /* > + * ARM Ltd. Cortex A15 processor. > + */ > + .type __v7_ca15mp_proc_info, #object > +__v7_ca15mp_proc_info: > + .long 0x410fc0f0 > + .long 0xff0ffff0 > + __v7_proc __v7_ca15mp_setup, HWCAP_VFPv4 | HWCAP_IDIV As for A5, do we need to include additional VFP hwcap flags? ---Dave