[PATCH v2 1/6] ARM: mach-imx/mx27_3ds: Use the standard i.MX macro for GPIO numbering

[s.hauer@pengutronix.de (Sascha Hauer)]

All applpied to -next

On Wed, Jun 22, 2011 at 09:25:23AM -0300, Fabio Estevam wrote:
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> Changes since v1:
> - Rebased on Sascha's for-next branch
> 
>  arch/arm/mach-imx/mach-mx27_3ds.c |    6 +++---
>  1 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
> index 09ec036..3a58448 100644
> --- a/arch/arm/mach-imx/mach-mx27_3ds.c
> +++ b/arch/arm/mach-imx/mach-mx27_3ds.c
> @@ -42,9 +42,9 @@
>  
>  #include "devices-imx27.h"
>  
> -#define SD1_EN_GPIO (GPIO_PORTB + 25)
> -#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23)
> -#define SPI2_SS0 (GPIO_PORTD + 21)
> +#define SD1_EN_GPIO		IMX_GPIO_NR(2, 25)
> +#define OTG_PHY_RESET_GPIO	IMX_GPIO_NR(2, 23)
> +#define SPI2_SS0		IMX_GPIO_NR(4, 21)
>  #define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(3, 28))
>  
>  static const int mx27pdk_pins[] __initconst = {
> -- 
> 1.6.0.4
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |