From mboxrd@z Thu Jan 1 00:00:00 1970 From: s.hauer@pengutronix.de (Sascha Hauer) Date: Thu, 23 Jun 2011 09:46:21 +0200 Subject: [PATCH v2 1/6] ARM: mach-imx/mx27_3ds: Use the standard i.MX macro for GPIO numbering In-Reply-To: <1308745528-22089-1-git-send-email-fabio.estevam@freescale.com> References: <1308745528-22089-1-git-send-email-fabio.estevam@freescale.com> Message-ID: <20110623074621.GO6069@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org All applpied to -next On Wed, Jun 22, 2011 at 09:25:23AM -0300, Fabio Estevam wrote: > Signed-off-by: Fabio Estevam > --- > Changes since v1: > - Rebased on Sascha's for-next branch > > arch/arm/mach-imx/mach-mx27_3ds.c | 6 +++--- > 1 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c > index 09ec036..3a58448 100644 > --- a/arch/arm/mach-imx/mach-mx27_3ds.c > +++ b/arch/arm/mach-imx/mach-mx27_3ds.c > @@ -42,9 +42,9 @@ > > #include "devices-imx27.h" > > -#define SD1_EN_GPIO (GPIO_PORTB + 25) > -#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23) > -#define SPI2_SS0 (GPIO_PORTD + 21) > +#define SD1_EN_GPIO IMX_GPIO_NR(2, 25) > +#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23) > +#define SPI2_SS0 IMX_GPIO_NR(4, 21) > #define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28)) > > static const int mx27pdk_pins[] __initconst = { > -- > 1.6.0.4 > > > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |