From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM i.MX dma: Fix burstsize settings
Date: Wed, 6 Jul 2011 11:18:33 +0200 [thread overview]
Message-ID: <20110706091833.GT6069@pengutronix.de> (raw)
dmaengine expects the maxburst parameter in words, not bytes.
The imxdma driver and its users do this wrong. Fix this.
As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work
with imx-dma. This broke the driver with imx-sdma support which
correctly takes the maxburst parameter in words. This patch
puts the sdma based sound back to work.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
I made this as a cross subsystem patch to maintain bisectability. I
suggest to push it either via my tree or the dmaengine tree.
drivers/dma/imx-dma.c | 3 ++-
drivers/mmc/host/mxcmmc.c | 8 ++++----
sound/soc/imx/imx-pcm-dma-mx2.c | 4 ++--
3 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index e18eaab..d99f71c 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -135,7 +135,8 @@ static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
if (ret)
return ret;
- imx_dma_config_burstlen(imxdmac->imxdma_channel, imxdmac->watermark_level);
+ imx_dma_config_burstlen(imxdmac->imxdma_channel,
+ imxdmac->watermark_level * imxdmac->word_size);
return 0;
default:
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index cc20e02..14aa213 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -715,13 +715,13 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
int burstlen, ret;
/*
- * use burstlen of 64 in 4 bit mode (--> reg value 0)
- * use burstlen of 16 in 1 bit mode (--> reg value 16)
+ * use burstlen of 64 (16 words) in 4 bit mode (--> reg value 0)
+ * use burstlen of 16 (4 words) in 1 bit mode (--> reg value 16)
*/
if (ios->bus_width == MMC_BUS_WIDTH_4)
- burstlen = 64;
- else
burstlen = 16;
+ else
+ burstlen = 4;
if (mxcmci_use_dma(host) && burstlen != host->burstlen) {
host->burstlen = burstlen;
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index 4173b3d..43fdc24f 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -110,12 +110,12 @@ static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream,
slave_config.direction = DMA_TO_DEVICE;
slave_config.dst_addr = dma_params->dma_addr;
slave_config.dst_addr_width = buswidth;
- slave_config.dst_maxburst = dma_params->burstsize * buswidth;
+ slave_config.dst_maxburst = dma_params->burstsize;
} else {
slave_config.direction = DMA_FROM_DEVICE;
slave_config.src_addr = dma_params->dma_addr;
slave_config.src_addr_width = buswidth;
- slave_config.src_maxburst = dma_params->burstsize * buswidth;
+ slave_config.src_maxburst = dma_params->burstsize;
}
ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);
--
1.7.5.3
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next reply other threads:[~2011-07-06 9:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-06 9:18 Sascha Hauer [this message]
2011-07-06 15:03 ` [PATCH] ARM i.MX dma: Fix burstsize settings Mark Brown
2011-07-07 1:35 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110706091833.GT6069@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).