From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] i.MX cleanups
Date: Thu, 7 Jul 2011 10:14:24 +0200 [thread overview]
Message-ID: <20110707081424.GY6069@pengutronix.de> (raw)
Arnd,
[once again with the list on Cc]
Please pull the following i.MX cleanup patches. This branch is directly
based on the previous fixes pull request. I tried making this is
independent on the fixes branch, but it resulted in merge conflicts.
The following changes since commit 58f45e3c6f4fd2b9b9d7d43af71409a79a4b4cf6:
ARM: i.MX53: Fix IOMUX type o's (2011-07-07 09:59:42 +0200)
are available in the git repository at:
git://git.pengutronix.de/git/imx/linux-2.6.git cleanup
Fabio Estevam (6):
ARM: mx5/mx51_babbage: Move GPIO initialization for USB PHY Reset line to common place
ARM: mx5/mx51_babbage: Use gpio_request_array for USBH1 pins
ARM: imx/mach-apf9328: Simplify UART0 registration
ARM: mach-imx/scb9328: Make the UART gpio setup simpler
ARM: mach-imx/mx27_3ds: Use the standard gpio_to_irq function
ARM: mach-imx/mx27_3ds: Do not annotate the chip select as internal
H Hartley Sweeten (1):
plat-mxc/pwm.c: use resource_size()
Sascha Hauer (9):
ARM i.MX: fix last user of iomux.h and remove it
ARM i.MX: define CLOCK_TICK_RATE to bogus value
ARM i.MX: remove SoC defines around header includes
ARM i.MX: dmav1: kill SoC ifdefs
ARM i.MX mxc.h: use CONFIG_SOC_* instead of CONFIG_ARCH_*
ARM i.MX tzic: do not depend on MXC_INTERNAL_IRQS
ARM i.MX avic: do not depend on MXC_INTERNAL_IRQS
ARM i.MX: get rid of wrong MXC_INTERNAL_IRQ usage
ARM i.MX debug macro: use CONFIG_SOC_* instead of CONFIG_ARCH_*
Uwe Kleine-K?nig (3):
ARM: imx: convert to new leds-gpio registration helper
ARM: mx5: convert to new leds-gpio registration helper
ARM: mxs/tx28: convert to new leds-gpio registration helper
arch/arm/mach-imx/Kconfig | 5 +++
arch/arm/mach-imx/dma-v1.c | 25 ++---------------
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 23 ++++------------
arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c | 15 +++-------
arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c | 13 ++-------
arch/arm/mach-imx/mach-apf9328.c | 7 +----
arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 2 +-
arch/arm/mach-imx/mach-mx27_3ds.c | 15 +++++-----
arch/arm/mach-imx/mach-mx31moboard.c | 14 ++-------
arch/arm/mach-imx/mach-mx35_3ds.c | 2 +-
arch/arm/mach-imx/mach-scb9328.c | 17 ++----------
arch/arm/mach-imx/mx31lite-db.c | 15 +++-------
arch/arm/mach-mx5/Kconfig | 4 +++
arch/arm/mach-mx5/board-cpuimx51.c | 12 +++-----
arch/arm/mach-mx5/board-mx51_3ds.c | 3 +-
arch/arm/mach-mx5/board-mx51_babbage.c | 34 ++++++++++++------------
arch/arm/mach-mx5/board-mx51_efikamx.c | 15 +++-------
arch/arm/mach-mx5/board-mx51_efikasb.c | 16 +++--------
arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c | 24 ++++------------
arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c | 19 +++----------
arch/arm/mach-mxs/Kconfig | 1 +
arch/arm/mach-mxs/mach-tx28.c | 5 +--
arch/arm/plat-mxc/avic.c | 12 +++++---
arch/arm/plat-mxc/include/mach/debug-macro.S | 10 +++---
arch/arm/plat-mxc/include/mach/hardware.h | 28 +++----------------
arch/arm/plat-mxc/include/mach/iomux-v1.h | 3 --
arch/arm/plat-mxc/include/mach/iomux.h | 26 ------------------
arch/arm/plat-mxc/include/mach/mxc.h | 8 +++---
arch/arm/plat-mxc/include/mach/timex.h | 13 +-------
arch/arm/plat-mxc/pwm.c | 8 +++---
arch/arm/plat-mxc/tzic.c | 4 ++-
31 files changed, 120 insertions(+), 278 deletions(-)
delete mode 100644 arch/arm/plat-mxc/include/mach/iomux.h
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next reply other threads:[~2011-07-07 8:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-07 8:14 Sascha Hauer [this message]
2011-07-07 8:50 ` [GIT PULL] i.MX cleanups Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110707081424.GY6069@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox