From mboxrd@z Thu Jan  1 00:00:00 1970
From: s.hauer@pengutronix.de (Sascha Hauer)
Date: Mon, 11 Jul 2011 12:46:25 +0200
Subject: [PATCH 0/6] clk: Initial feedback for off-SoC slow bus clocks
In-Reply-To: <20110711102856.GG3239@n2100.arm.linux.org.uk>
References: <20110711025344.GA27497@opensource.wolfsonmicro.com>
	<20110711093124.GA3239@n2100.arm.linux.org.uk>
	<20110711100759.GG26347@pengutronix.de>
	<20110711102856.GG3239@n2100.arm.linux.org.uk>
Message-ID: <20110711104625.GH26347@pengutronix.de>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Mon, Jul 11, 2011 at 11:28:56AM +0100, Russell King - ARM Linux wrote:
> On Mon, Jul 11, 2011 at 12:07:59PM +0200, Sascha Hauer wrote:
> > On Mon, Jul 11, 2011 at 10:31:24AM +0100, Russell King - ARM Linux wrote:
> > > On Mon, Jul 11, 2011 at 11:53:44AM +0900, Mark Brown wrote:
> > > > The biggest issue I ran into was that as the clocks are all registered
> > > > by name with the API if you've got two instances of the same off-SoC
> > > > device in the system you'll not be able to disambiguate between the
> > > > clocks it provides.
> > > 
> > > Sigh.  That sounds like yet more trash.  Obviously whoever thought
> > > up that doesn't actually understand clks.
> > 
> > Nope. In the patches Jeremy posted clocks have a name, but this name
> > is not meant to be used with clk_get. clk_get is still implemented
> > in clkdev, so the matching between clocks and devices is independent
> > of the clock name.
> > 
> > In earlier versions of Jeremys patches the clock name was only present
> > when debugfs was compiled in and I think it can be changed back to this.
> > 
> > That said the debugfs support (which is not present in Jeremys latest
> > series) would break if two clocks with the same name have the same
> > parent, because the clock core would try to create to debugfs entries
> > with the same name.
> 
> If that's all its for, then can't some other solution for debugfs names
> (lets stop calling them clock names to avoid confusion) be found -
> such as
> 
> 	sprintf(debugfsname, "%s@%p", clk->debugfsprefix, clk);
> 

Sounds good. During my tests on i.MX I found it very convenient to have
speaking debugfs names, so I vote for this suggestion instead the
following ones.

> Or how about using something like this:
> 
> $debugfs/clkdev/device/connection -> ../../clk/<name-of-clk>
> $debugfs/clk/<name-of-clk>
> 
> where <name-of-clk> could just be the address of the struct clk (which
> eliminates the need to pass any names in) or some prefix plus an
> incrementing identifier, or just an incrementing number.
> 
> I did think about introducing such a scheme along with clkdev (and did
> have some code but that's long gone), but without the $debugfs/clk/ bit
> being standardized, it wouldn't have worked.
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |