linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: grant.likely@secretlab.ca (Grant Likely)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 7/7] spi/imx: add device tree probe support
Date: Thu, 14 Jul 2011 20:53:46 -0600	[thread overview]
Message-ID: <20110715025346.GT2927@ponder.secretlab.ca> (raw)
In-Reply-To: <1310231801-18761-8-git-send-email-shawn.guo@linaro.org>

On Sun, Jul 10, 2011 at 01:16:41AM +0800, Shawn Guo wrote:
> It adds device tree probe support for spi-imx driver.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Cc: Grant Likely <grant.likely@secretlab.ca>

Applied, thanks.

g.

> ---
>  .../devicetree/bindings/spi/fsl-imx-cspi.txt       |   22 +++++++++++
>  drivers/spi/spi-imx.c                              |   38 ++++++++++++++++----
>  2 files changed, 53 insertions(+), 7 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> 
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> new file mode 100644
> index 0000000..9841057
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> @@ -0,0 +1,22 @@
> +* Freescale (Enhanced) Configurable Serial Peripheral Interface
> +  (CSPI/eCSPI) for i.MX
> +
> +Required properties:
> +- compatible : Should be "fsl,<soc>-cspi" or "fsl,<soc>-ecspi"
> +- reg : Offset and length of the register set for the device
> +- interrupts : Should contain CSPI/eCSPI interrupt
> +- fsl,spi-num-chipselects : Contains the number of the chipselect
> +- cs-gpios : Specifies the gpio pins to be used for chipselects.
> +
> +Example:
> +
> +ecspi at 70010000 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	compatible = "fsl,imx51-ecspi";
> +	reg = <0x70010000 0x4000>;
> +	interrupts = <36>;
> +	fsl,spi-num-chipselects = <2>;
> +	cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
> +		   <&gpio3 25 0>; /* GPIO4_25 */
> +};
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index ad61828..5456bcc 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -34,6 +34,9 @@
>  #include <linux/spi/spi.h>
>  #include <linux/spi/spi_bitbang.h>
>  #include <linux/types.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
>  
>  #include <mach/spi.h>
>  
> @@ -606,6 +609,16 @@ static struct platform_device_id spi_imx_devtype[] = {
>  	}
>  };
>  
> +static const struct of_device_id spi_imx_dt_ids[] = {
> +	{ .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
> +	{ .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
> +	{ .compatible = "fsl,imx27-cspi", .data = &imx27_cspi_devtype_data, },
> +	{ .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
> +	{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
> +	{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
> +	{ /* sentinel */ }
> +};
> +
>  static void spi_imx_chipselect(struct spi_device *spi, int is_active)
>  {
>  	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
> @@ -739,19 +752,25 @@ static void spi_imx_cleanup(struct spi_device *spi)
>  
>  static int __devinit spi_imx_probe(struct platform_device *pdev)
>  {
> -	struct spi_imx_master *mxc_platform_info;
> +	struct device_node *np = pdev->dev.of_node;
> +	const struct of_device_id *of_id =
> +			of_match_device(spi_imx_dt_ids, &pdev->dev);
> +	struct spi_imx_master *mxc_platform_info =
> +			dev_get_platdata(&pdev->dev);
>  	struct spi_master *master;
>  	struct spi_imx_data *spi_imx;
>  	struct resource *res;
>  	int i, ret, num_cs;
>  
> -	mxc_platform_info = dev_get_platdata(&pdev->dev);
> -	if (!mxc_platform_info) {
> +	if (!np && !mxc_platform_info) {
>  		dev_err(&pdev->dev, "can't get the platform data\n");
>  		return -EINVAL;
>  	}
>  
> -	num_cs = mxc_platform_info->num_chipselect;
> +	ret = of_property_read_u32(np, "fsl,spi-num-chipselects", &num_cs);
> +	if (ret < 0)
> +		num_cs = mxc_platform_info->num_chipselect;
> +
>  	master = spi_alloc_master(&pdev->dev,
>  			sizeof(struct spi_imx_data) + sizeof(int) * num_cs);
>  	if (!master)
> @@ -766,9 +785,12 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
>  	spi_imx->bitbang.master = spi_master_get(master);
>  
>  	for (i = 0; i < master->num_chipselect; i++) {
> -		spi_imx->chipselect[i] = mxc_platform_info->chipselect[i];
> -		if (spi_imx->chipselect[i] < 0)
> +		int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
> +		if (cs_gpio < 0)
> +			cs_gpio = mxc_platform_info->chipselect[i];
> +		if (cs_gpio < 0)
>  			continue;
> +		spi_imx->chipselect[i] = cs_gpio;
>  		ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
>  		if (ret) {
>  			while (i > 0) {
> @@ -790,7 +812,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
>  
>  	init_completion(&spi_imx->xfer_done);
>  
> -	spi_imx->devtype_data =
> +	spi_imx->devtype_data = of_id ? of_id->data :
>  		(struct spi_imx_devtype_data *) pdev->id_entry->driver_data;
>  
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -838,6 +860,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
>  
>  	spi_imx->devtype_data->intctrl(spi_imx, 0);
>  
> +	master->dev.of_node = pdev->dev.of_node;
>  	ret = spi_bitbang_start(&spi_imx->bitbang);
>  	if (ret) {
>  		dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
> @@ -900,6 +923,7 @@ static struct platform_driver spi_imx_driver = {
>  	.driver = {
>  		   .name = DRIVER_NAME,
>  		   .owner = THIS_MODULE,
> +		   .of_match_table = spi_imx_dt_ids,
>  		   },
>  	.id_table = spi_imx_devtype,
>  	.probe = spi_imx_probe,
> -- 
> 1.7.4.1
> 

      reply	other threads:[~2011-07-15  2:53 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-09 17:16 [PATCH v2 0/7] Add device tree support for imx spi driver Shawn Guo
2011-07-09 17:16 ` [PATCH v2 1/7] spi/imx: do not make copy of spi_imx_devtype_data Shawn Guo
2011-07-11  7:15   ` Lothar Waßmann
2011-07-11  7:31     ` Uwe Kleine-König
2011-07-11  7:49       ` Lothar Waßmann
2011-07-11  7:35     ` Shawn Guo
2011-07-11  7:32       ` Lothar Waßmann
2011-07-15  2:53   ` Grant Likely
2011-07-09 17:16 ` [PATCH v2 2/7] spi/imx: use mx21 to name SPI_IMX_VER_0_0 function and macro Shawn Guo
2011-07-11  7:35   ` Uwe Kleine-König
2011-07-15  2:53     ` Grant Likely
2011-07-09 17:16 ` [PATCH v2 3/7] spi/imx: do not use spi_imx2_3 to name SPI_IMX_VER_2_3 " Shawn Guo
2011-07-15  2:53   ` Grant Likely
2011-07-09 17:16 ` [PATCH v2 4/7] spi/imx: merge type SPI_IMX_VER_0_7 into SPI_IMX_VER_0_4 Shawn Guo
2011-07-11  7:38   ` Uwe Kleine-König
2011-07-09 17:16 ` [PATCH v2 5/7] spi/imx: use soc name in spi device type naming scheme Shawn Guo
2011-07-15  2:53   ` Grant Likely
2011-07-09 17:16 ` [PATCH v2 6/7] spi/imx: copy gpio number passed by platform data into driver private data Shawn Guo
2011-07-11  7:45   ` Uwe Kleine-König
2011-07-09 17:16 ` [PATCH v2 7/7] spi/imx: add device tree probe support Shawn Guo
2011-07-15  2:53   ` Grant Likely [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110715025346.GT2927@ponder.secretlab.ca \
    --to=grant.likely@secretlab.ca \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).