From: grant.likely@secretlab.ca (Grant Likely)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] mtd: dataflash: add device tree probe support
Date: Thu, 14 Jul 2011 20:54:07 -0600 [thread overview]
Message-ID: <20110715025407.GF2927@ponder.secretlab.ca> (raw)
In-Reply-To: <1310658757-17018-1-git-send-email-shawn.guo@linaro.org>
On Thu, Jul 14, 2011 at 11:52:37PM +0800, Shawn Guo wrote:
> It adds device tree probe support for mtd_dataflash driver.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: David Woodhouse <dwmw2@infradead.org>
> Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
> ---
> Changes since v1:
> * Add "atmel,at45xxx" into the match table
> * Add binding document
>
> .../devicetree/bindings/mtd/atmel-dataflash.txt | 14 ++++++++++++++
> drivers/mtd/devices/mtd_dataflash.c | 13 ++++++++++++-
> 2 files changed, 26 insertions(+), 1 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
>
> diff --git a/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
> new file mode 100644
> index 0000000..3783962
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
> @@ -0,0 +1,14 @@
> +* Atmel Data Flash
> +
> +Required properties:
> +- compatible : "atmel,<model>", "atmel,<series>", "atmel,dataflash".
> +
> +Example:
> +
> +flash at 1 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "atmel,at45db321d", "atmel,at45xxx", "atmel,dataflash";
> + spi-max-frequency = <25000000>;
> + reg = <1>;
> +};
> diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
> index 8f6b02c..8e091b0 100644
> --- a/drivers/mtd/devices/mtd_dataflash.c
> +++ b/drivers/mtd/devices/mtd_dataflash.c
> @@ -24,6 +24,8 @@
> #include <linux/mtd/mtd.h>
> #include <linux/mtd/partitions.h>
>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
This shouldn't be separate from the regular block of #include
statements above it.
>
> /*
> * DataFlash is a kind of SPI flash. Most AT45 chips have two buffers in
> @@ -98,6 +100,12 @@ struct dataflash {
> struct mtd_info mtd;
> };
>
> +static const struct of_device_id dataflash_dt_ids[] = {
> + { .compatible = "atmel,at45xxx", },
> + { .compatible = "atmel,dataflash", },
> + { /* sentinel */ }
> +};
> +
This should be protected with a #ifdef CONFIG_OF/#else/#endif, and
there should be a MODULE_DEVICE_TABLE().
> /* ......................................................................... */
>
> /*
> @@ -634,6 +642,7 @@ add_dataflash_otp(struct spi_device *spi, char *name,
> {
> struct dataflash *priv;
> struct mtd_info *device;
> + struct mtd_part_parser_data ppdata;
> struct flash_platform_data *pdata = spi->dev.platform_data;
> char *otp_tag = "";
> int err = 0;
> @@ -675,7 +684,8 @@ add_dataflash_otp(struct spi_device *spi, char *name,
> pagesize, otp_tag);
> dev_set_drvdata(&spi->dev, priv);
>
> - err = mtd_device_parse_register(device, NULL, 0,
> + ppdata.of_node = spi->dev.of_node;
> + err = mtd_device_parse_register(device, NULL, &ppdata,
> pdata ? pdata->parts : NULL,
> pdata ? pdata->nr_parts : 0);
>
> @@ -926,6 +936,7 @@ static struct spi_driver dataflash_driver = {
> .name = "mtd_dataflash",
> .bus = &spi_bus_type,
> .owner = THIS_MODULE,
> + .of_match_table = dataflash_dt_ids,
> },
>
> .probe = dataflash_probe,
> --
> 1.7.4.1
>
next prev parent reply other threads:[~2011-07-15 2:54 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-10 7:35 [PATCH] mtd: dataflash: add device tree probe support Shawn Guo
2011-07-14 15:52 ` [PATCH v2] " Shawn Guo
2011-07-14 17:10 ` Mike Frysinger
2011-07-14 17:52 ` Dmitry Eremin-Solenikov
2011-07-15 2:54 ` Grant Likely
2011-07-15 4:42 ` Shawn Guo
2011-07-15 2:54 ` Grant Likely [this message]
2011-07-15 4:49 ` Shawn Guo
2011-07-20 4:40 ` Artem Bityutskiy
2011-07-20 4:55 ` Shawn Guo
2011-07-20 5:17 ` Artem Bityutskiy
2011-07-20 5:28 ` Shawn Guo
2011-07-20 5:32 ` Artem Bityutskiy
2011-07-20 5:38 ` Mike Frysinger
2011-07-20 5:52 ` Shawn Guo
2011-07-20 5:52 ` Artem Bityutskiy
2011-07-15 8:38 ` [PATCH v3] " Shawn Guo
2011-07-20 4:51 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110715025407.GF2927@ponder.secretlab.ca \
--to=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).