From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] OMAP2xxx: HWMOD: fix DSS opt clocks
Date: Sat, 20 Aug 2011 23:42:38 -0600 [thread overview]
Message-ID: <20110821054227.20198.80273.stgit@dusk> (raw)
In-Reply-To: <20110821053355.20198.23847.stgit@dusk>
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Set HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core to allow DSS reset
properly.
Add missing ick opt-clock for rfbi. Rfbi uses the ick to calculate
timings.
Fix the venc iclk and fclk.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 15 +++++++++++++--
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 15 +++++++++++++--
2 files changed, 26 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a015c69..09d9395 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -874,12 +874,17 @@ static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = {
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+ /*
+ * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+ * driver does not use these clocks.
+ */
{ .role = "tv_clk", .clk = "dss_54m_fck" },
{ .role = "sys_clk", .clk = "dss2_fck" },
};
static struct omap_hwmod omap2420_dss_core_hwmod = {
.name = "dss_core",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.class = &omap2_dss_hwmod_class,
.main_clk = "dss1_fck", /* instead of dss_fck */
.sdma_reqs = omap2xxx_dss_sdma_chs,
@@ -962,6 +967,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = {
&omap2420_l4_core__dss_rfbi,
};
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "dss_ick" },
+};
+
static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
@@ -973,6 +982,8 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
.module_offs = CORE_MOD,
},
},
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap2420_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -983,7 +994,7 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
.master = &omap2420_l4_core_hwmod,
.slave = &omap2420_dss_venc_hwmod,
- .clk = "dss_54m_fck",
+ .clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.fw = {
.omap2 = {
@@ -1003,7 +1014,7 @@ static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = {
static struct omap_hwmod omap2420_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
- .main_clk = "dss1_fck",
+ .main_clk = "dss_54m_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 16743c7..67aff19 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -940,12 +940,17 @@ static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = {
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+ /*
+ * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+ * driver does not use these clocks.
+ */
{ .role = "tv_clk", .clk = "dss_54m_fck" },
{ .role = "sys_clk", .clk = "dss2_fck" },
};
static struct omap_hwmod omap2430_dss_core_hwmod = {
.name = "dss_core",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.class = &omap2_dss_hwmod_class,
.main_clk = "dss1_fck", /* instead of dss_fck */
.sdma_reqs = omap2xxx_dss_sdma_chs,
@@ -1016,6 +1021,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = {
&omap2430_l4_core__dss_rfbi,
};
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "dss_ick" },
+};
+
static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
@@ -1027,6 +1036,8 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
.module_offs = CORE_MOD,
},
},
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap2430_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
@@ -1037,7 +1048,7 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
.master = &omap2430_l4_core_hwmod,
.slave = &omap2430_dss_venc_hwmod,
- .clk = "dss_54m_fck",
+ .clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
@@ -1051,7 +1062,7 @@ static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = {
static struct omap_hwmod omap2430_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
- .main_clk = "dss1_fck",
+ .main_clk = "dss_54m_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
next prev parent reply other threads:[~2011-08-21 5:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-21 5:42 [PATCHv3 0/5] OMAP DSS HWMOD fixes Paul Walmsley
2011-08-21 5:42 ` Paul Walmsley [this message]
2011-08-23 6:52 ` [PATCH 1/5] OMAP2xxx: HWMOD: fix DSS opt clocks Tony Lindgren
2011-08-23 6:54 ` Tony Lindgren
2011-08-23 6:54 ` Paul Walmsley
2011-08-21 5:42 ` [PATCH 2/5] OMAP3: " Paul Walmsley
2011-08-21 5:42 ` [PATCH 3/5] OMAP4: " Paul Walmsley
2011-08-21 5:42 ` [PATCH 4/5] OMAP2/3: HWMOD: Add SYSS_HAS_RESET_STATUS for dss Paul Walmsley
2011-08-21 5:42 ` [PATCH 5/5] OMAP: HWMOD: Unify DSS resets for all OMAPs Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110821054227.20198.80273.stgit@dusk \
--to=paul@pwsan.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).