linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: manjugk@ti.com (G, Manjunath Kondaiah)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC/PATCH v2 07/13] dt: omap: create platform bus for omap devices
Date: Tue, 23 Aug 2011 20:49:48 +0530	[thread overview]
Message-ID: <20110823151948.GC32698@manju-desktop> (raw)
In-Reply-To: <20110823090705.GI2796@pulham.picochip.com>

On Tue, Aug 23, 2011 at 10:07:05AM +0100, Jamie Iles wrote:
> Hi,
> 
> This creates a build failure for non-omap platforms as they don't know 
> about struct omap_device_pm_latency, struct omap_hwmod etc.
> 
> An empty of_omap_device_create() as inline should do the trick.
Thanks. I will introduce this.

-M
> 
> Jamie
> 
> On Tue, Aug 23, 2011 at 10:03:35AM +0500, G, Manjunath Kondaiah wrote:
> > 
> > The omap devices will use HWMOD for fetching device information
> > hence it needs to be handled seperately during platform bus
> > creation during dt build.
> > 
> > Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
> > ---
> >  drivers/of/platform.c |   41 ++++++++++++++++++++++++++++++++++++++++-
> >  1 files changed, 40 insertions(+), 1 deletions(-)
> > 
> > diff --git a/drivers/of/platform.c b/drivers/of/platform.c
> > index e50ffcb..bd2c089 100644
> > --- a/drivers/of/platform.c
> > +++ b/drivers/of/platform.c
> > @@ -24,6 +24,10 @@
> >  #include <linux/of_platform.h>
> >  #include <linux/platform_device.h>
> >  
> > +#ifdef CONFIG_ARCH_OMAP2PLUS
> > +#include <plat/omap_device.h>
> > +#endif
> > +
> >  const struct of_device_id of_default_bus_match_table[] = {
> >  	{ .compatible = "simple-bus", },
> >  #ifdef CONFIG_ARM_AMBA
> > @@ -544,6 +548,36 @@ static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *l
> >  	return NULL;
> >  }
> 
> #ifdef ARCH_OMAP
> 
> > +static struct omap_device_pm_latency omap_device_latency[] = {
> > +	[0] = {
> > +		.deactivate_func	= omap_device_idle_hwmods,
> > +		.activate_func		= omap_device_enable_hwmods,
> > +		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
> > +	},
> > +};
> > +
> > +int of_omap_device_create(struct device_node *np, const char *name, int id,
> > +							void *platform_data,
> > +							int pd_size)
> > +{
> > +	struct omap_hwmod *oh;
> > +	struct platform_device *pdev;
> > +
> > +	oh = omap_hwmod_lookup(name);
> > +	if (!oh) {
> > +		pr_err("Could not look up %s\n", name);
> > +		return -EEXIST;
> > +	}
> > +
> > +	pdev = omap_device_build_dt(np, name, id, oh, platform_data,
> > +				sizeof(platform_data), omap_device_latency,
> > +				ARRAY_SIZE(omap_device_latency), 0);
> > +	WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
> > +
> > +	pr_info("DT: omap_device build for %s is successful\n", name);
> > +	return PTR_ERR(pdev);
> > +}
> 
> #else /* ARCH_OMAP */
> static inline int of_omap_device_create(struct device_node *np,
> 					const char *name, int id,
> 					void *platform_data, int pd_size)
> {
> 	return -ENODEV;
> }
> #endif /* ARCH_OMAP */
> 
> > +
> >  /**
> >   * of_platform_bus_create() - Create a device for a node and its children.
> >   * @bus: device node of the bus to instantiate
> > @@ -565,7 +599,7 @@ static int of_platform_bus_create(struct device_node *bus,
> >  	struct platform_device *dev;
> >  	const char *bus_id = NULL;
> >  	void *platform_data = NULL;
> > -	int pd_size;
> > +	int pd_size = 0;
> >  	int id = -1;
> >  	int rc = 0;
> >  
> > @@ -597,6 +631,11 @@ static int of_platform_bus_create(struct device_node *bus,
> >  		return 0;
> >  	}
> >  
> > +	if (of_device_is_compatible(bus, "ti,omap-device")) {
> > +		of_omap_device_create(bus, bus_id, id, platform_data, pd_size);
> > +		return 0;
> > +	}
> > +
> >  	dev = of_platform_device_create_pdata(bus, bus_id, platform_data, parent);
> >  
> >  	/* override the id if auxdata gives an id */
> > -- 
> > 1.7.4.1
> > 
> > _______________________________________________
> > devicetree-discuss mailing list
> > devicetree-discuss at lists.ozlabs.org
> > https://lists.ozlabs.org/listinfo/devicetree-discuss

  reply	other threads:[~2011-08-23 15:19 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1314074021-25186-1-git-send-email-manjugk@ti.com>
     [not found] ` <1314074021-25186-10-git-send-email-manjugk@ti.com>
2011-08-23  8:23   ` [RFC/PATCH v2 09/13] dt: omap4: add soc file for handling i2c controllers Rajendra Nayak
2011-08-23 15:11     ` G, Manjunath Kondaiah
     [not found]   ` <4E537FA7.3050609@ti.com>
2011-08-23 13:48     ` Fwd: " Cousson, Benoit
2011-08-23 15:18       ` G, Manjunath Kondaiah
2011-08-23 19:45         ` Cousson, Benoit
     [not found] ` <1314074021-25186-8-git-send-email-manjugk@ti.com>
2011-08-23  9:07   ` [RFC/PATCH v2 07/13] dt: omap: create platform bus for omap devices Jamie Iles
2011-08-23 15:19     ` G, Manjunath Kondaiah [this message]
     [not found] ` <4E537ECB.1060704@ti.com>
2011-08-23 12:38   ` [RFC/PATCH v2 00/13] dt: omap: dt binding with omap_device and support for i2c1 Cousson, Benoit
2011-08-23 15:41 ` G, Manjunath Kondaiah
2011-08-24  9:41   ` Cousson, Benoit
     [not found] ` <1314074021-25186-9-git-send-email-manjugk@ti.com>
2011-08-23 15:46   ` [RFC/PATCH v2 08/13] dt: omap: i2c: add dt support for i2c1 controller G, Manjunath Kondaiah
2011-09-01 17:34     ` Cousson, Benoit
2011-09-02  3:22       ` G, Manjunath Kondaiah
     [not found]   ` <4E537F53.4030405@ti.com>
2011-08-23 19:15     ` Fwd: " Cousson, Benoit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110823151948.GC32698@manju-desktop \
    --to=manjugk@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).