From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@arm.linux.org.uk (Russell King - ARM Linux) Date: Fri, 26 Aug 2011 17:19:51 +0100 Subject: [PATCH v9 00/12] use nonblock mmc requests to minimize latency In-Reply-To: <1309539333-2606-1-git-send-email-per.forlin@linaro.org> References: <1309539333-2606-1-git-send-email-per.forlin@linaro.org> Message-ID: <20110826161951.GA26197@n2100.arm.linux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org I'm not sure who's responsible for this, but the nonblocking MMC stuff is broken on OMAPs HSMMC: mmcblk0: error -84 transferring data, sector 149201, nr 64, cmd response 0x900, card status 0xb00 mmcblk0: retrying using single block read ------------[ cut here ]------------ WARNING: at /home/rmk/git/linux-2.6-rmk/lib/dma-debug.c:811 check_unmap+0x1ac/0x764() omap_hsmmc omap_hsmmc.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000080933000] [size=20480 bytes] Modules linked in: Backtrace: [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c) r7:c1abfcb8 r6:c0186248 r5:c037de51 r4:0000032b [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x58/0x70) [] (warn_slowpath_common+0x0/0x70) from [] (warn_slowpath_fmt+0x38/0x40) r8:c1abfd50 r7:00000000 r6:00005000 r5:00000000 r4:80933000 [] (warn_slowpath_fmt+0x0/0x40) from [] (check_unmap+0x1ac/0x764) r3:c0367d55 r2:c037e24d [] (check_unmap+0x0/0x764) from [] (debug_dma_unmap_sg+0x100/0x134) [] (debug_dma_unmap_sg+0x0/0x134) from [] (dma_unmap_sg+0x24/0x7c) [] (dma_unmap_sg+0x0/0x7c) from [] (omap_hsmmc_post_req+0x48/0x54) [] (omap_hsmmc_post_req+0x0/0x54) from [] (mmc_start_req+0x9c/0x128) r4:c1a76000 [] (mmc_start_req+0x0/0x128) from [] (mmc_blk_issue_rw_rq+0x80/0x460) r8:c1ab5c00 r7:00000001 r6:c1ab5824 r5:c1ab5824 r4:c1ab5c00 [] (mmc_blk_issue_rw_rq+0x0/0x460) from [] (mmc_blk_issue_rq+0x2cc/0x2fc) [] (mmc_blk_issue_rq+0x0/0x2fc) from [] (mmc_queue_thread+0xa0/0x104) [] (mmc_queue_thread+0x0/0x104) from [] (kthread+0x88/0x90) [] (kthread+0x0/0x90) from [] (do_exit+0x0/0x618) r7:00000013 r6:c003d9a4 r5:c0054f04 r4:c1a7bc7c ---[ end trace 3314ad56daf5d14f ]--- Luckily thinks continue to work, but clearly releasing DMA mappings which drivers don't own is bad news. Unfortunately, I don't have the bandwidth to be able to investigate this at present - well, I could do but then I'd have to drop working on the OMAP4 vs generic suspend/resume code and learn about something I've no current clue about. Can someone please investigate and fix whatever is broken.