From mboxrd@z Thu Jan 1 00:00:00 1970 From: tony@atomide.com (Tony Lindgren) Date: Mon, 5 Sep 2011 02:49:28 -0700 Subject: [PATCH 3/6] ARM: mach-omap1: clean up debug-macro.S In-Reply-To: <1314932353-24813-4-git-send-email-nico@fluxnic.net> References: <1314932353-24813-1-git-send-email-nico@fluxnic.net> <1314932353-24813-4-git-send-email-nico@fluxnic.net> Message-ID: <20110905094928.GC1903@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org * Nicolas Pitre [110901 19:26]: > --- a/arch/arm/mach-omap1/include/mach/debug-macro.S > +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S > @@ -34,13 +29,13 @@ omap_uart_virt: .word 0x0 > .macro addruart, rp, rv, tmp > > /* Use omap_uart_phys/virt if already configured */ > -9: mrc p15, 0, \rp, c1, c0 > - tst \rp, #1 @ MMU enabled? > - ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled > - ldrne \rp, =omap_uart_phys @ MMU enabled > - add \rv, \rp, #4 @ omap_uart_virt > - ldr \rp, [\rp, #0] > - ldr \rv, [\rv, #0] > +9: adr \rp, 11f @ get effective addr of 11f > + ldr \rv, [\rp] @ get absolute addr of 11f > + sub \rv, \rv, \rp @ offset between the two > + ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys > + sub \tmp, \rp, \rv @ make it effective > + ldr \rp, [\tmp, #0] @ omap_uart_phys > + ldr \rv, [\tmp, #4] @ omap_uart_virt > cmp \rp, #0 @ is port configured? > cmpne \rv, #0 > bne 99f @ already configured The 11f above will fail for omap1 as we already have 11 defined there for omap1 uart1. The prepare patch I posted as 2.5/6 fixes that issue. This will also allow further clean-up to combine omap1 and omap2+ debug-macro.S. Below is updated version of your patch to use 99f instead of 11f. Tony From: Nicolas Pitre Date: Thu, 1 Sep 2011 22:59:10 -0400 Subject: [PATCH] ARM: mach-omap1: clean up debug-macro.S This achieves two goals: 1) Get rid of omap_uart_v2p() and omap_uart_p2v() which were the last users of PLAT_PHYS_OFFSET. 2) Remove the probing of the M bit in the CP15 control reg and make the access to the .data variables completely position independent. Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index 77a7202..2b36a28 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -13,13 +13,8 @@ #include -#include - #include -#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) -#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) - .pushsection .data omap_uart_phys: .word 0x0 omap_uart_virt: .word 0x0 @@ -34,13 +29,13 @@ omap_uart_virt: .word 0x0 .macro addruart, rp, rv, tmp /* Use omap_uart_phys/virt if already configured */ -9: mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rp, =omap_uart_phys @ MMU enabled - add \rv, \rp, #4 @ omap_uart_virt - ldr \rp, [\rp, #0] - ldr \rv, [\rv, #0] +9: adr \rp, 99f @ get effective addr of 99f + ldr \rv, [\rp] @ get absolute addr of 99f + sub \rv, \rv, \rp @ offset between the two + ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys + sub \tmp, \rp, \rv @ make it effective + ldr \rp, [\tmp, #0] @ omap_uart_phys + ldr \rv, [\tmp, #4] @ omap_uart_virt cmp \rp, #0 @ is port configured? cmpne \rv, #0 bne 100f @ already configured @@ -72,16 +67,17 @@ omap_uart_virt: .word 0x0 /* Store both phys and virt address for the uart */ 98: add \rp, \rp, #0xff000000 @ phys base - mrc p15, 0, \rv, c1, c0 - tst \rv, #1 @ MMU enabled? - ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rv, =omap_uart_phys @ MMU enabled - str \rp, [\rv, #0] + str \rp, [\tmp, #0] @ omap_uart_phys sub \rp, \rp, #0xff000000 @ phys base add \rp, \rp, #0xfe000000 @ virt base - add \rv, \rv, #4 @ omap_uart_lsr - str \rp, [\rv, #0] + str \rp, [\tmp, #4] @ omap_uart_virt b 9b + + .align +99: .word . + .word omap_uart_phys + .ltorg + 100: .endm