From mboxrd@z Thu Jan  1 00:00:00 1970
From: u.kleine-koenig@pengutronix.de (Uwe =?iso-8859-1?Q?Kleine-K=F6nig?=)
Date: Tue, 6 Sep 2011 21:25:42 +0200
Subject: [PATCH 3/4] ARM: mx53: Add resources for flexcan
In-Reply-To: <1315335696-20499-3-git-send-email-rogerio.pimentel@freescale.com>
References: <1315335696-20499-1-git-send-email-rogerio.pimentel@freescale.com>
	<1315335696-20499-3-git-send-email-rogerio.pimentel@freescale.com>
Message-ID: <20110906192542.GL28816@pengutronix.de>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Tue, Sep 06, 2011 at 04:01:35PM -0300, Rogerio Pimentel wrote:
> Adding resources for flexcan on i.MX53
> 
> Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com>
> ---
>  arch/arm/mach-mx5/devices-imx53.h            |    6 ++++++
>  arch/arm/plat-mxc/devices/platform-flexcan.c |    9 +++++++++
>  arch/arm/plat-mxc/include/mach/mx53.h        |    2 ++
>  3 files changed, 17 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
> index 7ca5d0c..8c00464 100644
> --- a/arch/arm/mach-mx5/devices-imx53.h
> +++ b/arch/arm/mach-mx5/devices-imx53.h
> @@ -44,3 +44,9 @@ extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
>  extern const struct imx_pata_imx_data imx53_pata_imx_data;
>  #define imx53_add_pata_imx() \
>  	imx_add_pata_imx(&imx53_pata_imx_data)
> +
> +extern const struct imx_flexcan_data imx53_flexcan_data[];
> +#define imx53_add_flexcan(id, pdata)	\
> +	imx_add_flexcan(&imx53_flexcan_data[id], pdata)
> +#define imx53_add_flexcan0(pdata)	imx53_add_flexcan(0, pdata)
> +#define imx53_add_flexcan1(pdata)	imx53_add_flexcan(1, pdata)
> diff --git a/arch/arm/plat-mxc/devices/platform-flexcan.c b/arch/arm/plat-mxc/devices/platform-flexcan.c
> index 4e8497a..72777e0 100644
> --- a/arch/arm/plat-mxc/devices/platform-flexcan.c
> +++ b/arch/arm/plat-mxc/devices/platform-flexcan.c
> @@ -37,6 +37,15 @@ const struct imx_flexcan_data imx35_flexcan_data[] __initconst = {
>  };
>  #endif /* ifdef CONFIG_SOC_IMX35 */
>  
> +#ifdef CONFIG_SOC_IMX53
> +const struct imx_flexcan_data imx53_flexcan_data[] __initconst = {
> +#define imx53_flexcan_data_entry(_id, _hwid)				\
> +	imx_flexcan_data_entry(MX53, _id, _hwid, SZ_16K)
> +	imx53_flexcan_data_entry(0, 1),
> +	imx53_flexcan_data_entry(1, 2),
> +};
> +#endif /* ifdef CONFIG_SOC_IMX53 */
> +
Nowadays we prefer:

const struct imx_flexcan_data imx53_flexcan_data[] __initconst = {
	imx_flexcan_data_entry(MX53, 0, 1, SZ_16K),
	imx_flexcan_data_entry(MX53, 1, 2, SZ_16K),
};

>  struct platform_device *__init imx_add_flexcan(
>  		const struct imx_flexcan_data *data,
>  		const struct flexcan_platform_data *pdata)
> diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
> index 5e3c323..e96ed9f 100644
> --- a/arch/arm/plat-mxc/include/mach/mx53.h
> +++ b/arch/arm/plat-mxc/include/mach/mx53.h
> @@ -90,6 +90,8 @@
>  #define MX53_PWM2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000B8000)
>  #define MX53_UART1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000BC000)
>  #define MX53_UART2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000C0000)
> +#define MX53_CAN1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000C8000)
> +#define MX53_CAN2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000CC000)
>  #define MX53_SRC_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000D0000)
>  #define MX53_CCM_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000D4000)
>  #define MX53_GPC_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000D8000)

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |