From mboxrd@z Thu Jan 1 00:00:00 1970 From: grant.likely@secretlab.ca (Grant Likely) Date: Thu, 8 Sep 2011 11:06:04 -0700 Subject: [RFC PATCH 03/10] documentation/dt: Add l3-noc bindings In-Reply-To: <1314191356-10963-4-git-send-email-b-cousson@ti.com> References: <1314191356-10963-1-git-send-email-b-cousson@ti.com> <1314191356-10963-4-git-send-email-b-cousson@ti.com> Message-ID: <20110908180604.GC2967@ponder.secretlab.ca> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Aug 24, 2011 at 03:09:09PM +0200, Benoit Cousson wrote: > Add documentation for the l3-noc bindings. > > Signed-off-by: Benoit Cousson > Cc: Randy Dunlap > --- > .../devicetree/bindings/arm/omap/l3-noc.txt | 18 ++++++++++++++++++ > 1 files changed, 18 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/omap/l3-noc.txt > > diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt > new file mode 100644 > index 0000000..dbfa878 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt > @@ -0,0 +1,18 @@ > +* TI - L3 Network On Chip (NoC) > + > +This version is an implementation of the generic NoC IP > +provided by Arteris. Hahaha. Here's the documentation. Okay. > + > +Required properties: > +- compatible : Should be "ti,l3-noc", "arteris,noc" Should probably be "ti,omap4-l3-noc", and it isn't necessary to have a value for the IP core vendor... or at least if an arteris value is provided, then it should have some form of ip-core version information. > +- hwmods: "l3_main_1", ... One hwmod for each noc domain. Is there some documentation on how the "hwmods" property is to be used? I expect that this should be "ti,hwmods" because this is a TI specific property. > + > +Examples: > + > +ocp { > + compatible = "ti,l3-noc", "arteris,noc", "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; > +}; > -- > 1.7.0.4 >