From mboxrd@z Thu Jan  1 00:00:00 1970
From: shawn.guo@freescale.com (Shawn Guo)
Date: Mon, 19 Sep 2011 17:08:29 +0800
Subject: [PATCH 4/4] net/fec: add imx6q enet support
In-Reply-To: <20110918180912.GA3734@electric-eye.fr.zoreil.com>
References: <1316346852-17090-1-git-send-email-shawn.guo@linaro.org>
	<1316346852-17090-5-git-send-email-shawn.guo@linaro.org>
	<20110918180912.GA3734@electric-eye.fr.zoreil.com>
Message-ID: <20110919090828.GA28084@S2100-06.ap.freescale.net>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Sun, Sep 18, 2011 at 08:09:12PM +0200, Francois Romieu wrote:
> Shawn Guo <shawn.guo@linaro.org> :
> [...]
> > diff --git a/drivers/net/fec.c b/drivers/net/fec.c
> > index 04206e4..849cb0b 100644
> > --- a/drivers/net/fec.c
> > +++ b/drivers/net/fec.c
> > @@ -442,18 +453,23 @@ fec_restart(struct net_device *ndev, int duplex)
> >  		/* Enable flow control and length check */
> >  		rcntl |= 0x40000000 | 0x00000020;
> >  
> > -		/* MII or RMII */
> > +		/* RGMII, RMII or MII */
> > +		if (fep->phy_interface == PHY_INTERFACE_MODE_RGMII)
> > +			rcntl |= (1 << 6);
> >  		if (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
>            ^^^^ missing "else"
> 
Yes, my bad.

> [...]
> > +		/* 1G, 100M or 10M */
> > +		if (fep->phy_dev) {
> > +			if (fep->phy_dev->speed == SPEED_1000)
> > +				ecntl |= (1 << 8);

Right, this is a typo.  It should be (1 << 5);

> > +			else if (fep->phy_dev->speed == SPEED_100)
> > +				rcntl &= ~(1 << 9);
> > +			else
> > +				rcntl |= (1 << 9);
> > +		}
> [...]
> > +	if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
> > +		/* enable ENET endian swap */
> > +		ecntl |= (1 << 8);
> 
> I do not understand why the endian swap bit of ecntl needs to be
> set the same in these two different paths, especially as the latter
> handles the old faulty imx28 and the former the newly fixed imx6q.
> Typo ?
> 
Nice catches.  Thanks a lot, Ueimor.

-- 
Regards,
Shawn