[PATCH 17/30] usb/musb: allow building USB_MUSB_TUSB6010 as a module

[tony@atomide.com (Tony Lindgren)]

* Arnd Bergmann <arnd@arndb.de> [111002 07:13]:
> Commit 1376d92f9 "usb: musb: allow musb and glue layers to be modules"
> made the USB_MUSB_TUSB6010 option modular, but actually building
> the driver as a module does not work, so various randconfig builds
> actually fail. This changes all code that depends on the
> option to also check for modular builds, and exports the necessary
> symbols.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Cc: Felipe Balbi <balbi@ti.com>

I guess the tusb_get_revision could also be an inline function
in tusb6010.h if we wanted to avoid that EXPORT_SYMBOL. Anyways:

Acked-by: Tony Lindgren <tony@atomide.com>

> ---
>  arch/arm/mach-omap2/board-n8x0.c |    2 +-
>  drivers/usb/musb/musb_core.c     |    3 ++-
>  drivers/usb/musb/musb_io.h       |    2 +-
>  drivers/usb/musb/tusb6010.c      |    1 +
>  4 files changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
> index 403325d..c096dc2 100644
> --- a/arch/arm/mach-omap2/board-n8x0.c
> +++ b/arch/arm/mach-omap2/board-n8x0.c
> @@ -46,7 +46,7 @@ static struct device *mmc_device;
>  #define TUSB6010_GPIO_ENABLE	0
>  #define TUSB6010_DMACHAN	0x3f
>  
> -#ifdef CONFIG_USB_MUSB_TUSB6010
> +#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
>  /*
>   * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
>   * 1.5 V voltage regulators of PM companion chip. Companion chip will then
> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
> index 20a2873..9fa2596 100644
> --- a/drivers/usb/musb/musb_core.c
> +++ b/drivers/usb/musb/musb_core.c
> @@ -1432,7 +1432,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
>  		struct musb_hw_ep	*hw_ep = musb->endpoints + i;
>  
>  		hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
> -#ifdef CONFIG_USB_MUSB_TUSB6010
> +#if defined(CONFIG_USB_MUSB_TUSB6010) || defined (CONFIG_USB_MUSB_TUSB6010_MODULE)
>  		hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
>  		hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
>  		hw_ep->fifo_sync_va =
> @@ -1632,6 +1632,7 @@ void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
>  		}
>  	}
>  }
> +EXPORT_SYMBOL_GPL(musb_dma_completion);
>  
>  #else
>  #define use_dma			0
> diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
> index 03c6ccd..e61aa95 100644
> --- a/drivers/usb/musb/musb_io.h
> +++ b/drivers/usb/musb/musb_io.h
> @@ -74,7 +74,7 @@ static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
>  	{ __raw_writel(data, addr + offset); }
>  
>  
> -#ifdef CONFIG_USB_MUSB_TUSB6010
> +#if defined(CONFIG_USB_MUSB_TUSB6010) || defined (CONFIG_USB_MUSB_TUSB6010_MODULE)
>  
>  /*
>   * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
> diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
> index ec14801..1f40561 100644
> --- a/drivers/usb/musb/tusb6010.c
> +++ b/drivers/usb/musb/tusb6010.c
> @@ -56,6 +56,7 @@ u8 tusb_get_revision(struct musb *musb)
>  
>  	return rev;
>  }
> +EXPORT_SYMBOL_GPL(tusb_get_revision);
>  
>  static int tusb_print_revision(struct musb *musb)
>  {
> -- 
> 1.7.5.4
>