From mboxrd@z Thu Jan 1 00:00:00 1970 From: tony@atomide.com (Tony Lindgren) Date: Mon, 3 Oct 2011 11:18:26 -0700 Subject: [PATCH 23/30] ARM: omap2: select twl4030 support on boards that need it In-Reply-To: <1317566760-25681-24-git-send-email-arnd@arndb.de> References: <1317566760-25681-1-git-send-email-arnd@arndb.de> <1317566760-25681-24-git-send-email-arnd@arndb.de> Message-ID: <20111003181826.GZ6324@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org * Arnd Bergmann [111002 07:13]: > These three boards unconditionally use the twl4030 driver > from the board-zoom-display.c file. Make sure that the driver > is always there. > We also need to select the I2C core so we are able to build > that driver. > > Signed-off-by: Arnd Bergmann Acked-by: Tony Lindgren > --- > arch/arm/mach-omap2/Kconfig | 6 ++++++ > 1 files changed, 6 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 57b66d5..4deeade 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -253,6 +253,8 @@ config MACH_OMAP_ZOOM2 > select SERIAL_CORE_CONSOLE > select SERIAL_8250_CONSOLE > select REGULATOR_FIXED_VOLTAGE > + select TWL4030_CORE > + select I2C > > config MACH_OMAP_ZOOM3 > bool "OMAP3630 Zoom3 board" > @@ -263,6 +265,8 @@ config MACH_OMAP_ZOOM3 > select SERIAL_CORE_CONSOLE > select SERIAL_8250_CONSOLE > select REGULATOR_FIXED_VOLTAGE > + select TWL4030_CORE > + select I2C > > config MACH_CM_T35 > bool "CompuLab CM-T35/CM-T3730 modules" > @@ -304,6 +308,8 @@ config MACH_OMAP_3630SDP > depends on ARCH_OMAP3 > default y > select OMAP_PACKAGE_CBP > + select TWL4030_CORE > + select I2C > > config MACH_TI8168EVM > bool "TI8168 Evaluation Module" > -- > 1.7.5.4 >