From mboxrd@z Thu Jan 1 00:00:00 1970 From: s.hauer@pengutronix.de (Sascha Hauer) Date: Tue, 4 Oct 2011 09:43:16 +0200 Subject: [PATCH] mx5: modify pm and idle In-Reply-To: <1317364642-22956-1-git-send-email-jason77.wang@gmail.com> References: <1317364642-22956-1-git-send-email-jason77.wang@gmail.com> Message-ID: <20111004074316.GK31404@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Sep 30, 2011 at 02:37:22PM +0800, Hui Wang wrote: > Two problems exist in the current i.MX5 pm suspend/resume and idle > functions. The first is the current i.MX5 suspend routine will call > tzic_enable_wake(1) to set wake source, this will set all enabled > irq as wake source rather than those wake capable. The second > is i.MX5 idle will call mx5_cpu_lp_set() to prepare enter low power > mode, but it forgets to call wfi instruction to enter this mode. > > To fix these two problems, using generic irq chip pm interface and > adding a new function mx5_arch_idle(). > > Signed-off-by: Hui Wang As shawn already pointed out this conflicts with the imx-cleanup branch. Can you rework this onto it? Shawn has reworked the SoC specific idle stuff, so this is different now. Also, please find a better subject for this patch. 'modify pm and idle' is not enough. Sascha > --- > > This patch is basing on the latest imx-features branch. > > This patch is validated on the i.MX51 PDK board (CPU revision 2.0). > > Since both pm suspend/resume and idle has close relation with > mx5_cpu_lp_set() and tzic_enable_wake(), i choose to use one patch > instead of independent two to address existing problems. > > arch/arm/mach-mx5/system.c | 24 +++++++++++++++-- > arch/arm/plat-mxc/include/mach/mxc.h | 2 +- > arch/arm/plat-mxc/include/mach/system.h | 3 +- > arch/arm/plat-mxc/tzic.c | 42 ++++++++++++++++++++++--------- > 4 files changed, 54 insertions(+), 17 deletions(-) > > diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c > index 76ae8dc..92bf341 100644 > --- a/arch/arm/mach-mx5/system.c > +++ b/arch/arm/mach-mx5/system.c > @@ -10,11 +10,17 @@ > * http://www.opensource.org/licenses/gpl-license.html > * http://www.gnu.org/copyleft/gpl.html > */ > +#include > +#include > #include > #include > #include > +#include > + > #include "crm_regs.h" > > +static struct clk *gpc_dvfs_clk; > + > /* set cpu low power mode before WFI instruction. This function is called > * mx5 because it can be used for mx50, mx51, and mx53.*/ > void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) > @@ -54,9 +60,6 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) > stop_mode = 1; > } > arm_srpgcr |= MXC_SRPGCR_PCR; > - > - if (tzic_enable_wake(1) != 0) > - return; > break; > case STOP_POWER_ON: > ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET; > @@ -82,3 +85,18 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) > __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR); > } > } > + > +void mx5_arch_idle(void) > +{ > + if (gpc_dvfs_clk == NULL) > + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); > + > + /* gpc clock is needed for SRPG */ > + clk_enable(gpc_dvfs_clk); > + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); > + if (tzic_enable_wake() != 0) > + goto exit; > + cpu_do_idle(); > +exit: > + clk_disable(gpc_dvfs_clk); > +} > diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h > index 0987923..c4d324a 100644 > --- a/arch/arm/plat-mxc/include/mach/mxc.h > +++ b/arch/arm/plat-mxc/include/mach/mxc.h > @@ -182,7 +182,7 @@ struct cpu_op { > u32 cpu_rate; > }; > > -int tzic_enable_wake(int is_idle); > +int tzic_enable_wake(void); > enum mxc_cpu_pwr_mode { > WAIT_CLOCKED, /* wfi only */ > WAIT_UNCLOCKED, /* WAIT */ > diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h > index 51f02a9..5b6f991 100644 > --- a/arch/arm/plat-mxc/include/mach/system.h > +++ b/arch/arm/plat-mxc/include/mach/system.h > @@ -21,6 +21,7 @@ > #include > > extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode); > +extern void mx5_arch_idle(void); > > static inline void arch_idle(void) > { > @@ -51,7 +52,7 @@ static inline void arch_idle(void) > "mcr p15, 0, %0, c1, c0, 0\n" > : "=r" (reg)); > } else if (cpu_is_mx51()) > - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); > + mx5_arch_idle(); > else > cpu_do_idle(); > } > diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c > index e993a18..bd73910 100644 > --- a/arch/arm/plat-mxc/tzic.c > +++ b/arch/arm/plat-mxc/tzic.c > @@ -72,14 +72,35 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) > #define tzic_set_irq_fiq NULL > #endif > > -static unsigned int *wakeup_intr[4]; > - > static struct mxc_extra_irq tzic_extra_irq = { > #ifdef CONFIG_FIQ > .set_irq_fiq = tzic_set_irq_fiq, > #endif > }; > > +#ifdef CONFIG_PM > +static void tzic_irq_suspend(struct irq_data *d) > +{ > + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); > + int idx = gc->irq_base >> 5; > + > + __raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx)); > +} > + > +static void tzic_irq_resume(struct irq_data *d) > +{ > + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); > + int idx = gc->irq_base >> 5; > + > + __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)), > + tzic_base + TZIC_WAKEUP0(idx)); > +} > + > +#else > +#define tzic_irq_suspend NULL > +#define tzic_irq_resume NULL > +#endif > + > static __init void tzic_init_gc(unsigned int irq_start) > { > struct irq_chip_generic *gc; > @@ -90,12 +111,13 @@ static __init void tzic_init_gc(unsigned int irq_start) > handle_level_irq); > gc->private = &tzic_extra_irq; > gc->wake_enabled = IRQ_MSK(32); > - wakeup_intr[idx] = &gc->wake_active; > > ct = gc->chip_types; > ct->chip.irq_mask = irq_gc_mask_disable_reg; > ct->chip.irq_unmask = irq_gc_unmask_enable_reg; > ct->chip.irq_set_wake = irq_gc_set_wake; > + ct->chip.irq_suspend = tzic_irq_suspend; > + ct->chip.irq_resume = tzic_irq_resume; > ct->regs.disable = TZIC_ENCLEAR0(idx); > ct->regs.enable = TZIC_ENSET0(idx); > > @@ -166,23 +188,19 @@ void __init tzic_init_irq(void __iomem *irqbase) > /** > * tzic_enable_wake() - enable wakeup interrupt > * > - * @param is_idle 1 if called in idle loop (ENSET0 register); > - * 0 to be used when called from low power entry > * @return 0 if successful; non-zero otherwise > */ > -int tzic_enable_wake(int is_idle) > +int tzic_enable_wake(void) > { > - unsigned int i, v; > + unsigned int i; > > __raw_writel(1, tzic_base + TZIC_DSMINT); > if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0)) > return -EAGAIN; > > - for (i = 0; i < 4; i++) { > - v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) : > - *wakeup_intr[i]; > - __raw_writel(v, tzic_base + TZIC_WAKEUP0(i)); > - } > + for (i = 0; i < 4; i++) > + __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)), > + tzic_base + TZIC_WAKEUP0(i)); > > return 0; > } > -- > 1.7.6 > > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |