[PATCH] arm/tegra: select AUTO_ZRELADDR by default

[linux@arm.linux.org.uk (Russell King - ARM Linux)]

On Fri, Oct 14, 2011 at 04:06:21PM -0400, Nicolas Pitre wrote:
> Currently, U-Boot insists on having a uImage with a fixed absolute load 
> address.  This is currently provided by the zreladdr value, whether or 
> not AUTO_ZRELADDR is set.  I consider this as a persisting uImage 
> limitation.
> 
> Either u-Boot gets fixed so it can work with plain zImage (and this 
> certainly will happen once the pressure from people wanting a single 
> kernel to work on targets with different load addresses increase.  
> Tegra is one such example.
> 
> Or we create a u-Boot specific Kconfig menu for uImage options that 
> would be common to all architectures and kick it out from the ARM 
> specific makefile.  This is not solving the u-Boot limitation though.
> 
> In either cases this is a u-Boot problem that needs fixing on the u-Boot 
> side in the end.

I don't think that's so with the various flavours of platform specific
uboot which float around.  For instance, on the OMAP4430 SDP, the
following commands were used as supplied to load a uImage off the SD
card into RAM at a different address to which it was built for, and
execute it at that address:

mmcinit 0
fatload mmc 0 0x80300000 uImage
bootm 80300000

Whether the 'bootm' command then copied the image and called it there,
or whether it executed it at 0x80300000 I've no idea - but why then
load the image at a different address in the first place?