[PATCH 2/3] spi/pl022: disable the PL022 block when unused

[linux@arm.linux.org.uk (Russell King - ARM Linux)]

On Tue, Oct 18, 2011 at 02:43:27PM +0530, Viresh Kumar wrote:
> On 10/17/2011 6:42 PM, Linus WALLEIJ wrote:
> > From: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
> > 
> > Make sure we clear the enable bit when the block is not used.
> > This will save some energy in certain hardware versions.
> > 
> > Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> > ---
> >  drivers/spi/spi-pl022.c |    7 ++++++-
> >  1 files changed, 6 insertions(+), 1 deletions(-)
> > 
> > diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
> > index 91700bb..0a1d8ed 100644
> > --- a/drivers/spi/spi-pl022.c
> > +++ b/drivers/spi/spi-pl022.c
> > @@ -513,7 +513,12 @@ static void giveback(struct pl022 *pl022)
> >  	msg->state = NULL;
> >  	if (msg->complete)
> >  		msg->complete(msg->context);
> > -	/* This message is completed, so let's turn off the clocks & power */
> > +
> > +	/* disable the SPI/SSP operation */
> > +	writew((readw(SSP_CR1(pl022->virtbase)) &
> > +		(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
> > +
> > +	/* This message is completed, so let's turn off the clock! */
> >  	clk_disable(pl022->clk);
> >  	amba_pclk_disable(pl022->adev);
> >  	amba_vcore_disable(pl022->adev);
> 
> Reviewed-by: Viresh Kumar <viresh.kumar@st.com>

Note that I have some changes around here in my amba branch (which are
dependent on other changes I have for the primecell runtime pm.)