From mboxrd@z Thu Jan 1 00:00:00 1970 From: thierry.reding@avionic-design.de (Thierry Reding) Date: Tue, 25 Oct 2011 07:52:39 +0200 Subject: [PATCH] arm/tegra: Add device-tree support for TrimSlice board In-Reply-To: <74CDBE0F657A3D45AFBB94109FB122FF173E1B4171@HQMAIL01.nvidia.com> References: <1319450467-11819-1-git-send-email-swarren@nvidia.com> <5320972.AGvAdFqRz5@ax5200p> <74CDBE0F657A3D45AFBB94109FB122FF173E1B4171@HQMAIL01.nvidia.com> Message-ID: <20111025055238.GA30358@avionic-0098.mockup.avionic-design.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org * Stephen Warren wrote: > Marc Dietrich wrote at Monday, October 24, 2011 3:28 PM: > > On Monday 24 October 2011 12:01:07 Stephen Warren wrote: > > > * Add device-tree file for TrimSlice > > > * Add that to the list of .dts files to build > > > * Update board-dt.c to recognize TrimSlice board name > > > > > > Signed-off-by: Stephen Warren > > > --- > > > arch/arm/boot/dts/tegra-trimslice.dts | 38 > > > +++++++++++++++++++++++++++++++++ arch/arm/mach-tegra/Makefile.boot | > > > 1 + > > > arch/arm/mach-tegra/board-dt.c | 3 ++ > > > 3 files changed, 42 insertions(+), 0 deletions(-) > > > create mode 100644 arch/arm/boot/dts/tegra-trimslice.dts > > > > doesn't this also require to add something like > > > > obj-${CONFIG_MACH_TEGRA_DT} += board-trimslice-pinmux.o > > > > to the Makefile? > > Yes, definitely. I've fixed this up locally; I hope to repost soon. Can it please be obj-$(CONFIG_MACH_TEGRA_DT) instead? I think both Russell and Olof agreed[0] to use parens instead of braces, even though the current practice is to copy what previous boards did. Thierry [0]: http://article.gmane.org/gmane.linux.ports.tegra/1670 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: not available URL: