From: ming.lei@canonical.com (Ming Lei)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 2/7] arm: pmu: allow platform specific irq enable/disable handling
Date: Tue, 1 Nov 2011 11:26:46 +0800 [thread overview]
Message-ID: <20111101112646.75fba9db@tom-ThinkPad-T410> (raw)
In-Reply-To: <1319467559-5518-3-git-send-email-ming.lei@canonical.com>
Hi,
Attach the patch [PATCH v5 2/7] which is rebased on 3.1 -next.
BTW: The [PATCH v5 3/7] should be dropped as commented before, other patches
are OK against 3.1 -next.
thanks,
--
Ming Lei
--
>From 6125bef1aeee84ef22efdf743077f27f5274b6da Mon Sep 17 00:00:00 2001
From: Ming Lei <ming.lei@canonical.com>
Date: Wed, 2 Mar 2011 15:00:08 +0800
Subject: [PATCH v6 2/6] arm: pmu: allow platform specific irq enable/disable
handling
This patch introduces .enable_irq and .disable_irq into
struct arm_pmu_platdata, so platform specific irq enablement
can be handled after request_irq, and platform specific irq
disablement can be handled before free_irq.
This patch is for support of pmu irq routed from CTI on omap4.
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
---
arch/arm/include/asm/pmu.h | 15 ++++++++++++---
arch/arm/kernel/perf_event.c | 10 ++++++++--
2 files changed, 20 insertions(+), 5 deletions(-)
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index 71d99b8..46a96a8 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -27,13 +27,22 @@ enum arm_pmu_type {
/*
* struct arm_pmu_platdata - ARM PMU platform data
*
- * @handle_irq: an optional handler which will be called from the interrupt and
- * passed the address of the low level handler, and can be used to implement
- * any platform specific handling before or after calling it.
+ * @handle_irq: an optional handler which will be called from the
+ * interrupt and passed the address of the low level handler,
+ * and can be used to implement any platform specific handling
+ * before or after calling it.
+ * @enable_irq: an optional handler which will be called after
+ * request_irq and be used to handle some platform specific
+ * irq enablement
+ * @disable_irq: an optional handler which will be called before
+ * free_irq and be used to handle some platform specific
+ * irq disablement
*/
struct arm_pmu_platdata {
irqreturn_t (*handle_irq)(int irq, void *dev,
irq_handler_t pmu_handler);
+ void (*enable_irq)(int irq);
+ void (*disable_irq)(int irq);
};
#ifdef CONFIG_CPU_HAS_PMU
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index e6e5d7c..4c4aa83 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -374,6 +374,8 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
{
int i, irq, irqs;
struct platform_device *pmu_device = armpmu->plat_device;
+ struct arm_pmu_platdata *plat =
+ dev_get_platdata(&pmu_device->dev);
irqs = min(pmu_device->num_resources, num_possible_cpus());
@@ -381,8 +383,11 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
continue;
irq = platform_get_irq(pmu_device, i);
- if (irq >= 0)
+ if (irq >= 0) {
+ if (plat && plat->disable_irq)
+ plat->disable_irq(irq);
free_irq(irq, armpmu);
+ }
}
release_pmu(armpmu->type);
@@ -439,7 +444,8 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu)
irq);
armpmu_release_hardware(armpmu);
return err;
- }
+ } else if (plat && plat->enable_irq)
+ plat->enable_irq(irq);
cpumask_set_cpu(i, &armpmu->active_irqs);
}
--
1.7.5.4
--
Ming Lei
next prev parent reply other threads:[~2011-11-01 3:26 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-24 14:45 [PATCH v5 0/7] arm: pmu: support pmu/perf on OMAP4 ming.lei at canonical.com
2011-10-24 14:45 ` [PATCH v5 1/7] arm: introduce cross trigger interface helpers ming.lei at canonical.com
2011-10-24 14:45 ` [PATCH v5 2/7] arm: pmu: allow platform specific irq enable/disable handling ming.lei at canonical.com
2011-11-01 3:26 ` Ming Lei [this message]
2011-11-01 12:52 ` Will Deacon
2011-10-24 14:45 ` [PATCH v5 3/7] arm: perf: support device with other non-irq resources ming.lei at canonical.com
2011-10-24 15:08 ` Will Deacon
2011-10-25 1:09 ` Ming Lei
2011-10-25 8:34 ` Will Deacon
2011-10-25 8:44 ` Paul Walmsley
2011-10-25 10:23 ` Ming Lei
2011-10-25 11:00 ` Paul Walmsley
2011-11-08 9:25 ` Ming Lei
2011-11-08 12:17 ` Will Deacon
2011-10-24 14:45 ` [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod ming.lei at canonical.com
2011-11-08 15:26 ` Paul Walmsley
2011-11-09 9:56 ` Ming Lei
2011-11-10 9:02 ` Paul Walmsley
2011-11-11 11:41 ` Will Deacon
2011-11-11 11:47 ` Jamie Iles
2011-11-11 11:59 ` Will Deacon
2011-11-11 14:56 ` Cousson, Benoit
2011-11-11 14:58 ` Will Deacon
2011-11-11 15:12 ` Cousson, Benoit
2011-11-11 15:22 ` Will Deacon
2011-11-18 12:58 ` Cousson, Benoit
2011-11-18 14:56 ` Will Deacon
2011-11-19 14:42 ` Ming Lei
2011-11-20 3:27 ` Paul Walmsley
2011-11-21 13:58 ` Will Deacon
2011-11-21 14:53 ` Ming Lei
2011-11-21 15:16 ` Will Deacon
2011-11-21 15:30 ` Ming Lei
2011-11-19 14:37 ` Ming Lei
2011-11-27 1:58 ` Paul Walmsley
2011-11-27 2:07 ` Paul Walmsley
2011-11-29 16:19 ` Cousson, Benoit
2011-11-29 18:11 ` Paul Walmsley
2011-11-30 16:20 ` Cousson, Benoit
2011-11-08 15:42 ` Paul Walmsley
2011-11-09 11:33 ` Ming Lei
2011-10-24 14:45 ` [PATCH v5 5/7] arm: omap4: create pmu device via hwmod ming.lei at canonical.com
2011-10-24 14:45 ` [PATCH v5 6/7] arm: omap4: support pmu ming.lei at canonical.com
2011-11-23 17:47 ` Rabin Vincent
2011-11-25 0:37 ` Ming Lei
2011-10-24 14:45 ` [PATCH v5 7/7] arm: omap4: pmu: support runtime pm ming.lei at canonical.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111101112646.75fba9db@tom-ThinkPad-T410 \
--to=ming.lei@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox