orion/kirkwood and device tree

[michael@walle.cc (Michael Walle)]

Am Donnerstag 03 November 2011, 19:47:45 schrieb Jason:
> Michael,
> 
> On Wed, Nov 02, 2011 at 11:03:04PM +0100, Michael Walle wrote:
> > Am Mittwoch 02 November 2011, 17:50:57 schrieb Jason:
> > > Michael,
> > > 
> > > On Mon, Oct 31, 2011 at 11:50:28PM +0100, Michael Walle wrote:
> > > > i've already ported some marvell devices to DT. spi-orion, orion-wdt,
> > > > rtc-mv and mv_cesa. Atm i'm struggling with how to pass
> > > > kirkwood_mbus_dram_info to the device drivers (the old method is to
> > > > pass it through platform_data)
> > > 
> > > Do you have a public git tree I could pull from, by chance?  I don't
> > > care about the state, I'd like to learn by example and start pitching
> > > in.
> > 
> > yeah i pushed it to github:
> > https://github.com/mwalle/linux/tree/kirkwood-devtree
> 
> This is great!  I was having trouble figuring out how to do the
> interrupt controller, and you have that.  I'll look more closely this
> evening.
> 
> My only comment so far is that I think a lot of what you have in
> lschlv2.dts can be in kirkwood.dtsi.  That way other boards don't have
> to copy it (serial, spi, ehci, wdt, rtc, crypto).
yeah i had it there and it should be definitely put back to kirkwood.dtsi. the 
reason i've put it into lschv2.dts atm is that there is the clock property for 
every device, which may be different for different platforms.

> Oh, also, I think the board-dt.c should be pulling the phys addresses
> from the dt, it looks like you're still relying on the #defines...
i haven't looked at ethernet/mdio yet ;)

-- 
Michael