From: thomas.petazzoni@free-electrons.com (Thomas Petazzoni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] ARM: AT91: Add platform data for the ADCs
Date: Tue, 8 Nov 2011 14:19:10 +0100 [thread overview]
Message-ID: <20111108141910.53f6b861@skate> (raw)
In-Reply-To: <1320682113-23655-2-git-send-email-maxime.ripard@free-electrons.com>
Le Mon, 7 Nov 2011 17:08:31 +0100,
Maxime Ripard <maxime.ripard@free-electrons.com> a ?crit :
> +/* ADC */
> +struct at91_adc_data {
> + /* ADC Clock as specified by the datasheet, in Hz. */
> + unsigned int adc_clock;
> + /*
> + * Global number of channels available (to specify which channels are
> + * indeed used on the board, see the channels_used array).
channels_used is no longer an array, but a bitmap.
Regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2011-11-08 13:19 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-19 16:18 [PATCH] AT91: Add a driver for the ADC Maxime Ripard
2011-10-19 16:18 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-10-19 16:18 ` [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver Maxime Ripard
2011-10-19 16:42 ` Jonathan Cameron
2011-10-19 18:23 ` Maxime Ripard
2011-10-20 7:05 ` Thomas Petazzoni
2011-10-20 8:33 ` Jonathan Cameron
2011-10-20 8:49 ` Thomas Petazzoni
2011-10-20 9:19 ` Jonathan Cameron
2011-10-20 9:52 ` Mark Brown
2011-10-20 7:09 ` Lars-Peter Clausen
2011-10-21 17:54 ` Maxime Ripard
2011-10-21 17:55 ` Lars-Peter Clausen
2011-10-23 9:08 ` Jean-Christophe PLAGNIOL-VILLARD
2011-10-24 8:21 ` Maxime Ripard
2011-10-19 16:18 ` [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board Maxime Ripard
2011-10-20 6:28 ` Alexander Stein
2011-10-21 17:47 ` Maxime Ripard
2011-10-20 7:14 ` Thomas Petazzoni
2011-11-03 10:11 ` [PATCHv2] AT91: Add a driver for the ADC Maxime Ripard
2011-11-03 10:11 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-03 11:27 ` Linus Walleij
2011-11-03 16:27 ` Maxime Ripard
2011-11-03 16:38 ` Linus Walleij
2011-11-03 18:05 ` Jean-Christophe PLAGNIOL-VILLARD
2011-11-04 10:27 ` Jonathan Cameron
2011-11-04 10:36 ` Jonathan Cameron
2011-11-04 10:34 ` Jonathan Cameron
2011-11-04 15:22 ` Maxime Ripard
2011-11-04 16:28 ` Jonathan Cameron
2011-11-03 10:11 ` [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver Maxime Ripard
2011-11-04 10:27 ` Jonathan Cameron
2011-11-04 16:29 ` Maxime Ripard
2011-11-04 16:40 ` Jonathan Cameron
2011-11-03 10:11 ` [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board Maxime Ripard
2011-11-04 10:33 ` Jonathan Cameron
2011-11-04 11:25 ` Maxime Ripard
2011-11-04 15:52 ` Linus Walleij
2011-11-04 16:32 ` Jonathan Cameron
2011-11-07 16:08 ` [PATCHv3] AT91: Add a driver for the ADC Maxime Ripard
2011-11-07 16:08 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-07 16:27 ` Jonathan Cameron
2011-11-08 13:19 ` Thomas Petazzoni [this message]
2011-11-07 16:08 ` [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver Maxime Ripard
2011-11-08 13:30 ` Thomas Petazzoni
2011-11-07 16:08 ` [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board Maxime Ripard
2011-11-09 10:19 ` [PATCHv4] AT91: Add a driver for the ADC Maxime Ripard
2011-11-09 10:19 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-09 10:19 ` [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver Maxime Ripard
2011-11-10 17:35 ` Jonathan Cameron
2011-11-11 12:34 ` Jonathan Cameron
2011-11-14 9:59 ` Maxime Ripard
2011-11-14 9:06 ` Maxime Ripard
2011-11-09 10:19 ` [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board Maxime Ripard
2011-11-10 17:37 ` Jonathan Cameron
-- strict thread matches above, loose matches on Subject: below --
2011-11-14 10:06 [PATCHv5] AT91: Add a driver for the ADC Maxime Ripard
2011-11-14 10:06 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-14 11:29 ` Nicolas Ferre
2011-11-14 17:30 [PATCH v6] AT91: Add a driver for the ADC Maxime Ripard
2011-11-14 17:30 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-15 10:54 [PATCH v7] AT91: Add a driver for the ADC Maxime Ripard
2011-11-15 10:54 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-18 10:12 [PATCH v8] AT91: Add a driver for the ADC Maxime Ripard
2011-11-18 10:12 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-24 11:27 [PATCH v9] AT91: Add a driver for the ADC Maxime Ripard
2011-11-24 11:27 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-24 14:29 ` Jean-Christophe PLAGNIOL-VILLARD
2011-11-30 9:14 [PATCH v11] AT91: Add a driver for the ADC Maxime Ripard
2011-11-30 9:15 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-30 9:45 ` Nicolas Ferre
2011-12-02 13:17 [PATCH v12] AT91: Add a driver for the ADC Maxime Ripard
2011-12-02 13:17 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-12-14 10:01 [PATCH v13] AT91: Add a driver for the ADC Maxime Ripard
2011-12-14 10:01 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-12-14 10:27 ` Alexander Stein
2011-12-15 19:37 ` Maxime Ripard
2012-01-16 21:36 [PATCH RESEND v13] AT91: Add a driver for the ADC Maxime Ripard
2012-01-16 21:36 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111108141910.53f6b861@skate \
--to=thomas.petazzoni@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox