From mboxrd@z Thu Jan  1 00:00:00 1970
From: marek.vasut@gmail.com (Marek Vasut)
Date: Wed, 9 Nov 2011 00:59:49 +0100
Subject: [PATCH v6 00/11] change pxa gpio to platform driver
In-Reply-To: <201111090059.34110.marek.vasut@gmail.com>
References: <1320747859-8366-1-git-send-email-haojian.zhuang@marvell.com>
 <201111090059.34110.marek.vasut@gmail.com>
Message-ID: <201111090059.50159.marek.vasut@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

> > Changelog
> > 
> > v6:
> >      1. fix build issue in pxa910 since building gpio failure is found in
> >      
> >         mainline.
> >      
> >      2. merge two dependant patches (original v5 0005 and 0006) together.
> >      3. fix gpio bit issue in corgi and spitz.
> >      4. replace printk() with dev_err in clk patch.
> > 
> > v5:
> >      1. use generic gpio driver. So clean gpio-pxa.h and gpio-pxa.c
> >      again.
> > 
> > v4:
> >      1. append one patch for clean gpio macros and use function instead.
> > 
> > v3:
> >      1. Rebase on Russell's for-next branch.
> >      2. Add clock support.
> >      3. Move gpio edge detection initiliaztion of arch-mmp into gpio
> > 
> > driver.
> > 
> > v2:
> >     1. Remove gpio.c from mach-pxa & mach-mmp that is introduced from v1.
> >     2. Remove init function in gpio.c. Move the
> >     platfrom_device_register()
> >     
> >        into platform driver.
> >     
> >     3. Initialize pxa_gpio_regs in gpio-pxa.c
> >     4. Simplify code of identifing pxa gpio series or mmp gpio series.
> >     5. Use linux/io.h instead of asm/io.h.
> 
> Hi Haojian,
> 
> are we also getting pinmux support any soon?

I mean pinctrl of course.
> 
> M