From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/3] ARM: mx28evk: add platform data for saif
Date: Thu, 10 Nov 2011 09:38:52 +0100 [thread overview]
Message-ID: <20111110083852.GU16886@pengutronix.de> (raw)
In-Reply-To: <1320907333-12696-3-git-send-email-b29396@freescale.com>
On Thu, Nov 10, 2011 at 02:42:12PM +0800, Dong Aisheng wrote:
> This is for supporting saif record function.
>
> Signed-off-by: Dong Aisheng <b29396@freescale.com>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Wolfram Sang <w.sang@pengutronix.de>
> Cc: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Cc: Liam Girdwood <lrg@ti.com>
>
> ---
> No changes since v3:
> Changes since v2:
> * separate clkmux code into another patch
> * A few minus fixes suggested by Uwe & Wolfram.
> Changes since v1:
> * move saif clkmux code into mach-specific part
> ---
> arch/arm/mach-mxs/devices-mx28.h | 3 ++-
> arch/arm/mach-mxs/devices/platform-mxs-saif.c | 5 +++--
> arch/arm/mach-mxs/include/mach/common.h | 2 ++
> arch/arm/mach-mxs/include/mach/devices-common.h | 4 +++-
> arch/arm/mach-mxs/mach-mx28evk.c | 16 ++++++++++++++--
> 5 files changed, 24 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
> index c888710..4f50094 100644
> --- a/arch/arm/mach-mxs/devices-mx28.h
> +++ b/arch/arm/mach-mxs/devices-mx28.h
> @@ -47,6 +47,7 @@ struct platform_device *__init mx28_add_mxsfb(
> const struct mxsfb_platform_data *pdata);
>
> extern const struct mxs_saif_data mx28_saif_data[] __initconst;
> -#define mx28_add_saif(id) mxs_add_saif(&mx28_saif_data[id])
> +#define mx28_add_saif(id, pdata) \
> + mxs_add_saif(&mx28_saif_data[id], pdata)
>
> struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
> diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
> index 1ec965e..f6e3a60 100644
> --- a/arch/arm/mach-mxs/devices/platform-mxs-saif.c
> +++ b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
> @@ -32,7 +32,8 @@ const struct mxs_saif_data mx28_saif_data[] __initconst = {
> };
> #endif
>
> -struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data)
> +struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data,
> + const struct mxs_saif_platform_data *pdata)
> {
> struct resource res[] = {
> {
> @@ -56,5 +57,5 @@ struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data)
> };
>
> return mxs_add_platform_device("mxs-saif", data->id, res,
> - ARRAY_SIZE(res), NULL, 0);
> + ARRAY_SIZE(res), pdata, sizeof(*pdata));
> }
> diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
> index 635bb5d..bf91a10 100644
> --- a/arch/arm/mach-mxs/include/mach/common.h
> +++ b/arch/arm/mach-mxs/include/mach/common.h
> @@ -29,4 +29,6 @@ extern void mx28_init_irq(void);
>
> extern void icoll_init_irq(void);
>
> +extern int mxs_saif_clkmux_select(unsigned int clkmux);
> +extern int mxs_get_saif_clk_master_id(unsigned int saif_id);
> #endif /* __MACH_MXS_COMMON_H__ */
> diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
> index a8080f4..dc369c1 100644
> --- a/arch/arm/mach-mxs/include/mach/devices-common.h
> +++ b/arch/arm/mach-mxs/include/mach/devices-common.h
> @@ -94,6 +94,7 @@ struct platform_device *__init mxs_add_mxs_pwm(
> resource_size_t iobase, int id);
>
> /* saif */
> +#include <sound/saif.h>
> struct mxs_saif_data {
> int id;
> resource_size_t iobase;
> @@ -103,4 +104,5 @@ struct mxs_saif_data {
> };
>
> struct platform_device *__init mxs_add_saif(
> - const struct mxs_saif_data *data);
> + const struct mxs_saif_data *data,
> + const struct mxs_saif_platform_data *pdata);
> diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
> index 4a3cca3..5aab344 100644
> --- a/arch/arm/mach-mxs/mach-mx28evk.c
> +++ b/arch/arm/mach-mxs/mach-mx28evk.c
> @@ -28,6 +28,7 @@
>
> #include <mach/common.h>
> #include <mach/iomux-mx28.h>
> +#include <mach/digctl.h>
>
> #include "devices-mx28.h"
>
> @@ -417,6 +418,17 @@ static void __init mx28evk_add_regulators(void)
> static void __init mx28evk_add_regulators(void) {}
> #endif
>
> +static int mx28evk_mxs_saif_pinit(void)
> +{
> + return mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
> +}
This is board specific and not saif specific and thus should be called
directly in your board setup.
> +
> +static const struct mxs_saif_platform_data
> + mx28evk_mxs_saif_pdata __initconst = {
> + .init = mx28evk_mxs_saif_pinit,
> + .get_master_id = mxs_get_saif_clk_master_id,
This looks *very* suspicious. .init sets the mux register and
.get_master_id reads the very same information back. Why not simply put
a bool is_master into platform data?
This function pointers are not devicetree friendly. I don't know whether
i.MX28 will be ever converted to devicetree, but we should not
unnecessary additional hurdles.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2011-11-10 8:38 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-10 6:42 [PATCH v4 0/3] ARM: mxs: add recording support for saif Dong Aisheng
2011-11-10 6:42 ` [PATCH v4 1/3] ARM: mxs: add saif clkmux functions Dong Aisheng
2011-11-11 7:14 ` Shawn Guo
2011-11-11 7:19 ` Dong Aisheng-B29396
2011-11-11 7:41 ` Shawn Guo
2011-11-10 6:42 ` [PATCH v4 2/3] ARM: mx28evk: add platform data for saif Dong Aisheng
2011-11-10 8:38 ` Sascha Hauer [this message]
2011-11-10 9:23 ` Dong Aisheng-B29396
2011-11-10 10:26 ` Sascha Hauer
2011-11-10 11:05 ` [alsa-devel] " Dong Aisheng-B29396
2011-11-11 6:06 ` Shawn Guo
2011-11-10 6:42 ` [PATCH v4 3/3] ARM: mx28evk: set a initial clock rate " Dong Aisheng
2011-11-10 6:46 ` [PATCH v4 0/3] ARM: mxs: add recording support " Dong Aisheng-B29396
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111110083852.GU16886@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).